arm(64): Replace write32() and friends with writel()

This patch is a raw application of the following spatch to the
directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>,
src/soc/<arm(64)-soc> and src/drivers/gic:

@@
expression A, V;
@@
- write32(V, A)
+ writel(V, A)
@@
expression A, V;
@@
- write16(V, A)
+ writew(V, A)
@@
expression A, V;
@@
- write8(V, A)
+ writeb(V, A)

This replaces all uses of write{32,16,8}() with write{l,w,b}()
which is currently equivalent and much more common. This is a
preparatory step that will allow us to easier flip them all at once to
the new write32(a,v) model.

BRANCH=none
BUG=chromium:451388
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.

Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24
Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254862
Reviewed-on: http://review.coreboot.org/9834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
Julius Werner 2015-02-19 14:08:04 -08:00 committed by Patrick Georgi
parent 24f9476531
commit d21a329866
43 changed files with 366 additions and 498 deletions

View File

@ -33,6 +33,8 @@
*/
#define readb(a) read8(a)
#define writeb(v,a) write8(v,a)
#define readw(a) read16(a)
#define writew(v,a) write16(v,a)
#define readl(a) read32(a)
#define writel(v,a) write32(v,a)

View File

@ -28,7 +28,7 @@ void a1x_periph_clock_enable(enum a1x_clken periph)
addr = (void *)A1X_CCM_BASE + (periph >> 5);
reg32 = read32(addr);
reg32 |= 1 << (periph & 0x1f);
write32(reg32, addr);
writel(reg32, addr);
}
/**
@ -44,7 +44,7 @@ void a1x_periph_clock_disable(enum a1x_clken periph)
addr = (void *)A1X_CCM_BASE + (periph >> 5);
reg32 = read32(addr);
reg32 &= ~(1 << (periph & 0x1f));
write32(reg32, addr);
writel(reg32, addr);
}
/**
@ -88,7 +88,7 @@ void a1x_pll5_configure(u8 mul_n, u8 mul_k, u8 div_m, u8 exp_div_p)
reg32 |= (PLL5_FACTOR_M(div_m) | PLL5_FACTOR_N(mul_n) |
PLL5_FACTOR_K(mul_k) | PLL5_DIV_EXP_P(exp_div_p));
reg32 |= PLL5_PLL_ENABLE;
write32(reg32, &ccm->pll5_cfg);
writel(reg32, &ccm->pll5_cfg);
}
/**
@ -166,7 +166,7 @@ static void cpu_clk_src_switch(u32 clksel_bits)
reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
reg32 &= ~CPU_CLK_SRC_MASK;
reg32 |= clksel_bits & CPU_CLK_SRC_MASK;
write32(reg32, &ccm->cpu_ahb_apb0_cfg);
writel(reg32, &ccm->cpu_ahb_apb0_cfg);
}
static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
@ -179,7 +179,7 @@ static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
reg32 |= ((axi - 1) << 0) & AXI_DIV_MASK;
reg32 |= (ahb_exp << 4) & AHB_DIV_MASK;
reg32 |= (apb0_exp << 8) & APB0_DIV_MASK;
write32(reg32, &ccm->cpu_ahb_apb0_cfg);
writel(reg32, &ccm->cpu_ahb_apb0_cfg);
}
static void spin_delay(u32 loops)
@ -262,7 +262,7 @@ void a1x_set_cpu_clock(u16 cpu_clk_mhz)
change_sys_divisors(axi, ahb_exp, apb0_exp);
/* Configure PLL1 at the desired frequency */
write32(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
writel(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
spin_delay(8);
cpu_clk_src_switch(CPU_CLK_SRC_PLL1);

View File

@ -76,7 +76,7 @@ void gpio_write(u8 port, u32 val)
if ((port > GPS))
return;
write32(val, &gpio->port[port].dat);
writel(val, &gpio->port[port].dat);
}
/**

View File

@ -33,7 +33,7 @@ void gpio_set_pin_func(u8 port, u8 pin, u8 pad_func)
reg32 = read32(&gpio->port[port].cfg[reg]);
reg32 &= ~(0xf << bit);
reg32 |= (pad_func & 0xf) << bit;
write32(reg32, &gpio->port[port].cfg[reg]);
writel(reg32, &gpio->port[port].cfg[reg]);
}
/**
@ -74,6 +74,6 @@ void gpio_set_multipin_func(u8 port, u32 pin_mask, u8 pad_func)
reg32 &= ~(0xf << bit);
reg32 |= (pad_func & 0xf) << bit;
}
write32(reg32, &gpio->port[port].cfg[reg]);
writel(reg32, &gpio->port[port].cfg[reg]);
}
}

View File

@ -118,7 +118,7 @@ static void mctl_configure_hostport(void)
u32 i;
for (i = 0; i < 32; i++)
write32(hpcr_value[i], &dram->hpcr[i]);
writel(hpcr_value[i], &dram->hpcr[i]);
}
static void mctl_setup_dram_clock(u32 clk)
@ -333,9 +333,9 @@ static void dramc_set_autorefresh_cycle(u32 clk)
tmp_val = tmp_val * 9 - 200;
reg32 |= tmp_val << 8;
reg32 |= 0x8 << 24;
write32(reg32, &dram->drr);
writel(reg32, &dram->drr);
} else {
write32(0x0, &dram->drr);
writel(0x0, &dram->drr);
}
}
@ -360,7 +360,7 @@ unsigned long dramc_init(struct dram_para *para)
a1x_gate_dram_clock_output();
/* select dram controller 1 */
write32(DRAM_CSEL_MAGIC, &dram->csel);
writel(DRAM_CSEL_MAGIC, &dram->csel);
mctl_itm_disable();
mctl_enable_dll0(para->tpr3);
@ -390,7 +390,7 @@ unsigned long dramc_init(struct dram_para *para)
reg32 |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
reg32 |= DRAM_DCR_CMD_RANK_ALL;
reg32 |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
write32(reg32, &dram->dcr);
writel(reg32, &dram->dcr);
/* dram clock on */
a1x_ungate_dram_clock_output();
@ -405,21 +405,21 @@ unsigned long dramc_init(struct dram_para *para)
reg32 = ((para->zq) >> 8) & 0xfffff;
reg32 |= ((para->zq) & 0xff) << 20;
reg32 |= (para->zq) & 0xf0000000;
write32(reg32, &dram->zqcr0);
writel(reg32, &dram->zqcr0);
/* set I/O configure register */
reg32 = 0x00cc0000;
reg32 |= (para->odt_en) & 0x3;
reg32 |= ((para->odt_en) & 0x3) << 30;
write32(reg32, &dram->iocr);
writel(reg32, &dram->iocr);
/* set refresh period */
dramc_set_autorefresh_cycle(para->clock);
/* set timing parameters */
write32(para->tpr0, &dram->tpr0);
write32(para->tpr1, &dram->tpr1);
write32(para->tpr2, &dram->tpr2);
writel(para->tpr0, &dram->tpr0);
writel(para->tpr1, &dram->tpr1);
writel(para->tpr2, &dram->tpr2);
if (para->type == DRAM_MEMORY_TYPE_DDR3) {
reg32 = DRAM_MR_BURST_LENGTH(0x0);
@ -430,11 +430,11 @@ unsigned long dramc_init(struct dram_para *para)
reg32 |= DRAM_MR_CAS_LAT(para->cas);
reg32 |= DRAM_MR_WRITE_RECOVERY(0x5);
}
write32(reg32, &dram->mr);
writel(reg32, &dram->mr);
write32(para->emr1, &dram->emr);
write32(para->emr2, &dram->emr2);
write32(para->emr3, &dram->emr3);
writel(para->emr1, &dram->emr);
writel(para->emr2, &dram->emr2);
writel(para->emr3, &dram->emr3);
/* set DQS window mode */
clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);

View File

@ -24,13 +24,13 @@ void init_timer(void)
{
u32 reg32;
/* Load the timer rollover value */
write32(0xffffffff, &tmr0->interval);
writel(0xffffffff, &tmr0->interval);
/* Configure the timer to run from 24MHz oscillator, no prescaler */
reg32 = TIMER_CTRL_PRESC_DIV_EXP(0);
reg32 |= TIMER_CTRL_CLK_SRC_OSC24M;
reg32 |= TIMER_CTRL_RELOAD;
reg32 |= TIMER_CTRL_TMR_EN;
write32(reg32, &tmr0->ctrl);
writel(reg32, &tmr0->ctrl);
}
void udelay(unsigned usec)
@ -61,6 +61,6 @@ void udelay(unsigned usec)
*/
u8 a1x_get_cpu_chip_revision(void)
{
write32(0, &timer_module->cpu_cfg);
writel(0, &timer_module->cpu_cfg);
return (read32(&timer_module->cpu_cfg) >> 6) & 0x3;
}

View File

@ -42,7 +42,7 @@ static void configure_clock(struct a1x_twi *twi, u32 speed_hz)
/* Pre-divide the clock by 8 */
n = 3;
m = (apb_clk >> n) / speed_hz;
write32(TWI_CLK_M(m) | TWI_CLK_N(n), &twi->clk);
writel(TWI_CLK_M(m) | TWI_CLK_N(n), &twi->clk);
}
void a1x_twi_init(u8 bus, u32 speed_hz)
@ -53,9 +53,9 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
configure_clock(twi, speed_hz);
/* Enable the I²C bus */
write32(TWI_CTL_BUS_EN, &twi->ctl);
writel(TWI_CTL_BUS_EN, &twi->ctl);
/* Issue soft reset */
write32(1, &twi->reset);
writel(1, &twi->reset);
while (i-- && read32(&twi->reset))
udelay(1);
@ -63,12 +63,12 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
static void clear_interrupt_flag(struct a1x_twi *twi)
{
write32(read32(&twi->ctl) & ~TWI_CTL_INT_FLAG, &twi->ctl);
writel(read32(&twi->ctl) & ~TWI_CTL_INT_FLAG, &twi->ctl);
}
static void i2c_send_data(struct a1x_twi *twi, u8 data)
{
write32(data, &twi->data);
writel(data, &twi->data);
clear_interrupt_flag(twi);
}
@ -90,7 +90,7 @@ static void i2c_send_start(struct a1x_twi *twi)
reg32 = read32(&twi->ctl);
reg32 &= ~TWI_CTL_INT_FLAG;
reg32 |= TWI_CTL_M_START;
write32(reg32, &twi->ctl);
writel(reg32, &twi->ctl);
/* M_START is automatically cleared after condition is transmitted */
i = TWI_TIMEOUT;
@ -106,7 +106,7 @@ static void i2c_send_stop(struct a1x_twi *twi)
reg32 = read32(&twi->ctl);
reg32 &= ~TWI_CTL_INT_FLAG;
reg32 |= TWI_CTL_M_STOP;
write32(reg32, &twi->ctl);
writel(reg32, &twi->ctl);
}
static int i2c_read(struct a1x_twi *twi, uint8_t chip,

View File

@ -22,10 +22,10 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
div = (u16) uart_baudrate_divisor(baud_rate,
uart_platform_refclk(), 16);
/* Enable access to Divisor Latch register */
write32(UART8250_LCR_DLAB, &uart->lcr);
writel(UART8250_LCR_DLAB, &uart->lcr);
/* Set baudrate */
write32((div >> 8) & 0xff, &uart->dlh);
write32(div & 0xff, &uart->dll);
writel((div >> 8) & 0xff, &uart->dlh);
writel(div & 0xff, &uart->dll);
/* Set line control */
reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK;
switch (parity) {
@ -40,12 +40,12 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
default:
break;
}
write32(reg32, &uart->lcr);
writel(reg32, &uart->lcr);
}
static void a10_uart_enable_fifos(struct a10_uart *uart)
{
write32(UART8250_FCR_FIFO_EN, &uart->fcr);
writel(UART8250_FCR_FIFO_EN, &uart->fcr);
}
static int tx_fifo_full(struct a10_uart *uart)
@ -83,7 +83,7 @@ static void a10_uart_tx_blocking(struct a10_uart *uart, u8 data)
{
while (tx_fifo_full(uart)) ;
return write32(data, &uart->thr);
return writel(data, &uart->thr);
}

View File

@ -42,88 +42,88 @@ static void am335x_uart_init(struct am335x_uart *uart, uint16_t div)
uint16_t lcr_orig, efr_orig, mcr_orig;
/* reset the UART */
write16(uart->sysc | SYSC_SOFTRESET, &uart->sysc);
writew(uart->sysc | SYSC_SOFTRESET, &uart->sysc);
while (!(read16(&uart->syss) & SYSS_RESETDONE))
;
/* 1. switch to register config mode B */
lcr_orig = read16(&uart->lcr);
write16(0xbf, &uart->lcr);
writew(0xbf, &uart->lcr);
/*
* 2. Set EFR ENHANCED_EN bit. To access this bit, registers must
* be in TCR_TLR submode, meaning EFR[4] = 1 and MCR[6] = 1.
*/
efr_orig = read16(&uart->efr);
write16(efr_orig | EFR_ENHANCED_EN, &uart->efr);
writew(efr_orig | EFR_ENHANCED_EN, &uart->efr);
/* 3. Switch to register config mode A */
write16(0x80, &uart->lcr);
writew(0x80, &uart->lcr);
/* 4. Enable register submode TCR_TLR to access the UARTi.UART_TLR */
mcr_orig = read16(&uart->mcr);
write16(mcr_orig | MCR_TCR_TLR, &uart->mcr);
writew(mcr_orig | MCR_TCR_TLR, &uart->mcr);
/* 5. Enable the FIFO. For now we'll ignore FIFO triggers and DMA */
write16(FCR_FIFO_EN, &uart->fcr);
writew(FCR_FIFO_EN, &uart->fcr);
/* 6. Switch to configuration mode B */
write16(0xbf, &uart->lcr);
writew(0xbf, &uart->lcr);
/* Skip steps 7 and 8 (setting up FIFO triggers for DMA) */
/* 9. Restore original EFR value */
write16(efr_orig, &uart->efr);
writew(efr_orig, &uart->efr);
/* 10. Switch to config mode A */
write16(0x80, &uart->lcr);
writew(0x80, &uart->lcr);
/* 11. Restore original MCR value */
write16(mcr_orig, &uart->mcr);
writew(mcr_orig, &uart->mcr);
/* 12. Restore original LCR value */
write16(lcr_orig, &uart->lcr);
writew(lcr_orig, &uart->lcr);
/* Protocol, baud rate and interrupt settings */
/* 1. Disable UART access to DLL and DLH registers */
write16(read16(&uart->mdr1) | 0x7, &uart->mdr1);
writew(read16(&uart->mdr1) | 0x7, &uart->mdr1);
/* 2. Switch to config mode B */
write16(0xbf, &uart->lcr);
writew(0xbf, &uart->lcr);
/* 3. Enable access to IER[7:4] */
write16(efr_orig | EFR_ENHANCED_EN, &uart->efr);
writew(efr_orig | EFR_ENHANCED_EN, &uart->efr);
/* 4. Switch to operational mode */
write16(0x0, &uart->lcr);
writew(0x0, &uart->lcr);
/* 5. Clear IER */
write16(0x0, &uart->ier);
writew(0x0, &uart->ier);
/* 6. Switch to config mode B */
write16(0xbf, &uart->lcr);
writew(0xbf, &uart->lcr);
/* 7. Set dll and dlh to the desired values (table 19-25) */
write16((div >> 8), &uart->dlh);
write16((div & 0xff), &uart->dll);
writew((div >> 8), &uart->dlh);
writew((div & 0xff), &uart->dll);
/* 8. Switch to operational mode to access ier */
write16(0x0, &uart->lcr);
writew(0x0, &uart->lcr);
/* 9. Clear ier to disable all interrupts */
write16(0x0, &uart->ier);
writew(0x0, &uart->ier);
/* 10. Switch to config mode B */
write16(0xbf, &uart->lcr);
writew(0xbf, &uart->lcr);
/* 11. Restore efr */
write16(efr_orig, &uart->efr);
writew(efr_orig, &uart->efr);
/* 12. Set protocol formatting 8n1 (8 bit data, no parity, 1 stop bit) */
write16(0x3, &uart->lcr);
writew(0x3, &uart->lcr);
/* 13. Load the new UART mode */
write16(0x0, &uart->mdr1);
writew(0x0, &uart->mdr1);
}
/*
@ -145,7 +145,7 @@ static void am335x_uart_tx_byte(struct am335x_uart *uart, unsigned char data)
{
while (!(read16(&uart->lsr) & LSR_TXFIFOE));
return write8(data, &uart->thr);
return writeb(data, &uart->thr);
}
unsigned int uart_platform_refclk(void)

View File

@ -61,7 +61,7 @@ static struct gic *gic_get(void)
static inline void gic_write(uint32_t *base, uint32_t val)
{
write32(val, base);
writel(val, base);
}
static void gic_write_regs(uint32_t *base, size_t num_regs, uint32_t val)

View File

@ -38,12 +38,12 @@ static void cubieboard_set_sys_clock(void)
struct a10_ccm *ccm = (void *)A1X_CCM_BASE;
/* Switch CPU clock to main oscillator */
write32(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg);
writel(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg);
/* Configure the PLL1. The value is the same one used by u-boot
* P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz
*/
write32(0xa1005000, &ccm->pll1_cfg);
writel(0xa1005000, &ccm->pll1_cfg);
/* FIXME: Delay to wait for PLL to lock */
u32 wait = 1000;
@ -53,7 +53,7 @@ static void cubieboard_set_sys_clock(void)
reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
reg32 &= ~CPU_CLK_SRC_MASK;
reg32 |= CPU_CLK_SRC_PLL1;
write32(reg32, &ccm->cpu_ahb_apb0_cfg);
writel(reg32, &ccm->cpu_ahb_apb0_cfg);
}
static void cubieboard_setup_clocks(void)
@ -62,12 +62,12 @@ static void cubieboard_setup_clocks(void)
cubieboard_set_sys_clock();
/* Configure the clock source for APB1. This drives our UART */
write32(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0),
&ccm->apb1_clk_div_cfg);
writel(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0),
&ccm->apb1_clk_div_cfg);
/* Configure the clock for SD0 */
write32(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0)
| SDx_RAT_M(1), &ccm->sd0_clk_cfg);
writel(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1),
&ccm->sd0_clk_cfg);
/* Enable clock to SD0 */
a1x_periph_clock_enable(A1X_CLKEN_MMC0);

View File

@ -26,12 +26,12 @@ static struct apbmisc *misc = (struct apbmisc *)TEGRA_APB_MISC_BASE;
void enable_jtag(void)
{
write32(PP_CONFIG_CTL_JTAG, &misc->pp_config_ctl);
writel(PP_CONFIG_CTL_JTAG, &misc->pp_config_ctl);
}
void clamp_tristate_inputs(void)
{
write32(PP_PINMUX_CLAMP_INPUTS, &misc->pp_pinmux_global);
writel(PP_PINMUX_CLAMP_INPUTS, &misc->pp_pinmux_global);
}
void tegra_revision_info(struct tegra_revision *id)

View File

@ -67,8 +67,8 @@ static void gpio_write_port(int index, size_t offset, u32 mask, u32 value)
u32 new_reg = (reg & ~mask) | (value & mask);
if (new_reg != reg) {
write32(new_reg, (u8 *)&gpio_banks[bank] + offset +
port * sizeof(u32));
writel(new_reg,
(u8 *)&gpio_banks[bank] + offset + port * sizeof(u32));
}
}

View File

@ -40,9 +40,9 @@ static void do_bus_clear(int bus)
// 4. Set TERMINATE condition (1 = IMMEDIATE)
bc = read32(&regs->bus_clear_config);
bc |= I2C_BUS_CLEAR_CONFIG_BC_TERMINATE_IMMEDIATE;
write32(bc, &regs->bus_clear_config);
writel(bc, &regs->bus_clear_config);
// 4.1 Set MSTR_CONFIG_LOAD and wait for clear
write32(I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE, &regs->config_load);
writel(I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE, &regs->config_load);
for (i = 0; i < timeout_ms * 10 && (read32(&regs->config_load) &
I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE); i++) {
printk(BIOS_DEBUG, "%s: wait for MSTR_CONFIG_LOAD to clear\n",
@ -50,7 +50,7 @@ static void do_bus_clear(int bus)
udelay(100);
}
// 5. Set ENABLE to start the bus clear op
write32(bc | I2C_BUS_CLEAR_CONFIG_BC_ENABLE, &regs->bus_clear_config);
writel(bc | I2C_BUS_CLEAR_CONFIG_BC_ENABLE, &regs->bus_clear_config);
for (i = 0; i < timeout_ms * 10 && (read32(&regs->bus_clear_config) &
I2C_BUS_CLEAR_CONFIG_BC_ENABLE); i++) {
printk(BIOS_DEBUG, "%s: wait for bus clear completion\n",
@ -74,7 +74,7 @@ static int tegra_i2c_send_recv(int bus, int read,
rx_full >>= I2C_FIFO_STATUS_RX_FIFO_FULL_CNT_SHIFT;
while (header_words && tx_empty) {
write32(*headers++, &regs->tx_packet_fifo);
writel(*headers++, &regs->tx_packet_fifo);
header_words--;
tx_empty--;
}
@ -96,7 +96,7 @@ static int tegra_i2c_send_recv(int bus, int read,
int todo = MIN(data_len, sizeof(word));
memcpy(&word, data, todo);
write32(word, &regs->tx_packet_fifo);
writel(word, &regs->tx_packet_fifo);
data_len -= todo;
data += sizeof(word);
tx_empty--;
@ -208,5 +208,5 @@ void i2c_init(unsigned bus)
{
struct tegra_i2c_regs * const regs = tegra_i2c_info[bus].base;
write32(I2C_CNFG_PACKET_MODE_EN, &regs->cnfg);
writel(I2C_CNFG_PACKET_MODE_EN, &regs->cnfg);
}

View File

@ -26,7 +26,7 @@ static uint32_t *pingroup_regs = (void *)TEGRA_APB_PINGROUP_BASE;
void pingroup_set_config(int group_index, uint32_t config)
{
write32(config, &pingroup_regs[group_index]);
writel(config, &pingroup_regs[group_index]);
}
uint32_t pingroup_get_config(int group_index)

View File

@ -26,7 +26,7 @@ static uint32_t *pinmux_regs = (void *)TEGRA_APB_PINMUX_BASE;
void pinmux_set_config(int pin_index, uint32_t config)
{
write32(config, &pinmux_regs[pin_index]);
writel(config, &pinmux_regs[pin_index]);
}
uint32_t pinmux_get_config(int pin_index)

View File

@ -126,7 +126,7 @@ static void usb_ehci_reset_and_prepare(struct usb_ctlr *usb, enum usb_phy_type t
{
int timeout = 1000;
write32(1 << 1, &usb->ehci_usbcmd); /* Host Controller Reset */
writel(1 << 1, &usb->ehci_usbcmd); /* Host Controller Reset */
/* TODO: Resets are long, find way to parallelize... or just use XHCI */
while (--timeout && (read32(&usb->ehci_usbcmd) & 1 << 1))
/* wait for HC to reset */;
@ -137,11 +137,11 @@ static void usb_ehci_reset_and_prepare(struct usb_ctlr *usb, enum usb_phy_type t
}
/* Controller mode: HOST */
write32(3 << 0, &usb->usb_mode);
writel(3 << 0, &usb->usb_mode);
/* Parallel transceiver selct */
write32(type << 29, &usb->lpm_ctrl);
writel(type << 29, &usb->lpm_ctrl);
/* Tx FIFO Burst thresh */
write32(0x10 << 16, &usb->tx_fill_tuning);
writel(0x10 << 16, &usb->tx_fill_tuning);
}
/* Assume USBx clocked, out of reset, UTMI+ PLL set up, SAMP_x out of pwrdn */
@ -157,61 +157,27 @@ void usb_setup_utmip(void *usb_base)
udelay(1);
/* Take stuff out of pwrdn and add some magic numbers from U-Boot */
write32(0x8 << 25 | /* HS slew rate [10:4] */
0x3 << 22 | /* HS driver output 'SETUP' [6:4] */
0 << 21 | /* LS bias selection */
0 << 18 | /* PDZI pwrdn */
0 << 16 | /* PD2 pwrdn */
0 << 14 | /* PD pwrdn */
1 << 13 | /* (rst) HS receiver terminations */
0x1 << 10 | /* (rst) LS falling slew rate */
0x1 << 8 | /* (rst) LS rising slew rate */
0x4 << 0 | /* HS driver output 'SETUP' [3:0] */
0, &usb->utmip.xcvr0);
write32(0x7 << 18 | /* Termination range adjustment */
0 << 4 | /* PDDR pwrdn */
0 << 2 | /* PDCHRP pwrdn */
0 << 0 | /* PDDISC pwrdn */
0, &usb->utmip.xcvr1);
write32(1 << 19 | /* FS send initial J before sync(?) */
1 << 16 | /* (rst) Allow stuff error on SoP */
1 << 9 | /* (rst) Check disc only on EoP */
0, &usb->utmip.tx);
write32(0x2 << 30 | /* (rst) Keep pattern on active */
1 << 28 | /* (rst) Realign inertia on pkt */
0x1 << 24 | /* (rst) edges-1 to move sampling */
0x3 << 21 | /* (rst) squelch delay on EoP */
0x11 << 15 | /* cycles until IDLE */
0x10 << 10 | /* elastic input depth */
0, &usb->utmip.hsrx0);
writel(0x8 << 25 | 0x3 << 22 | 0 << 21 | 0 << 18 | 0 << 16 | 0 << 14 | 1 << 13 | 0x1 << 10 | 0x1 << 8 | 0x4 << 0 | 0,
&usb->utmip.xcvr0);
writel(0x7 << 18 | 0 << 4 | 0 << 2 | 0 << 0 | 0, &usb->utmip.xcvr1);
writel(1 << 19 | 1 << 16 | 1 << 9 | 0, &usb->utmip.tx);
writel(0x2 << 30 | 1 << 28 | 0x1 << 24 | 0x3 << 21 | 0x11 << 15 | 0x10 << 10 | 0,
&usb->utmip.hsrx0);
/* U-Boot claims the USBD values for these are used across all UTMI+
* PHYs. That sounds so horribly wrong that I'm not going to implement
* it, but keep it in mind if we're ever not using the USBD port. */
write32(0x1 << 24 | /* HS disconnect detect level [2] */
1 << 23 | /* (rst) IDPD value */
1 << 22 | /* (rst) IDPD select */
1 << 11 | /* (rst) OTG pwrdn */
0 << 10 | /* bias pwrdn */
0x1 << 2 | /* HS disconnect detect level [1:0] */
0x2 << 0 | /* HS squelch detect level */
0, &usb->utmip.bias0);
writel(0x1 << 24 | 1 << 23 | 1 << 22 | 1 << 11 | 0 << 10 | 0x1 << 2 | 0x2 << 0 | 0,
&usb->utmip.bias0);
write32(khz / 2200 << 3 | /* bias pwrdn cycles (20us?) */
1 << 2 | /* (rst) VBUS wakeup pwrdn */
0 << 0 | /* PDTRK pwrdn */
0, &usb->utmip.bias1);
writel(khz / 2200 << 3 | 1 << 2 | 0 << 0 | 0, &usb->utmip.bias1);
write32(0xffff << 16 | /* (rst) */
25 * khz / 10 << 0 | /* TODO: what's this, really? */
0, &usb->utmip.debounce);
writel(0xffff << 16 | 25 * khz / 10 << 0 | 0, &usb->utmip.debounce);
udelay(1);
setbits_le32(&usb->utmip.misc1, 1 << 30); /* PHY_XTAL_CLKEN */
write32(1 << 12 | /* UTMI+ enable */
0 << 11 | /* UTMI+ reset */
0, &usb->suspend_ctrl);
writel(1 << 12 | 0 << 11 | 0, &usb->suspend_ctrl);
usb_ehci_reset_and_prepare(usb, USB_PHY_UTMIP);
printk(BIOS_DEBUG, "USB controller @ %p set up with UTMI+ PHY\n",usb_base);

View File

@ -186,11 +186,11 @@ void clock_init_arm_generic_timer(void)
set_cntfrq(freq);
// Record the system timer frequency.
write32(freq, &sysctr->cntfid0);
writel(freq, &sysctr->cntfid0);
// Enable the system counter.
uint32_t cntcr = read32(&sysctr->cntcr);
cntcr |= SYSCTR_CNTCR_EN | SYSCTR_CNTCR_HDBG;
write32(cntcr, &sysctr->cntcr);
writel(cntcr, &sysctr->cntcr);
}
#define SOR0_CLK_SEL0 (1 << 14)
@ -243,25 +243,14 @@ static void init_utmip_pll(void)
clrbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */
udelay(1);
write32(80 << 16 | /* (rst) phy_divn */
1 << 8 | /* (rst) phy_divm */
0, &clk_rst->utmip_pll_cfg0); /* 960MHz * 1 / 80 == 12 MHz */
writel(80 << 16 | 1 << 8 | 0, &clk_rst->utmip_pll_cfg0); /* 960MHz * 1 / 80 == 12 MHz */
write32(CEIL_DIV(khz, 8000) << 27 | /* pllu_enbl_cnt / 8 (1us) */
0 << 16 | /* PLLU pwrdn */
0 << 14 | /* pll_enable pwrdn */
0 << 12 | /* pll_active pwrdn */
CEIL_DIV(khz, 102) << 0 | /* phy_stbl_cnt / 256 (2.5ms) */
0, &clk_rst->utmip_pll_cfg1);
writel(CEIL_DIV(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | CEIL_DIV(khz, 102) << 0 | 0,
&clk_rst->utmip_pll_cfg1);
/* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */
write32(0 << 24 | /* SAMP_D/XDEV pwrdn */
CEIL_DIV(khz, 3200) << 18 | /* phy_actv_cnt / 16 (5us) */
CEIL_DIV(khz, 256) << 6 | /* pllu_stbl_cnt / 256 (1ms) */
0 << 4 | /* SAMP_C/USB3 pwrdn */
0 << 2 | /* SAMP_B/XHOST pwrdn */
0 << 0 | /* SAMP_A/USBD pwrdn */
0, &clk_rst->utmip_pll_cfg2);
writel(0 << 24 | CEIL_DIV(khz, 3200) << 18 | CEIL_DIV(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0,
&clk_rst->utmip_pll_cfg2);
setbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */
}
@ -398,8 +387,8 @@ clock_display(u32 frequency)
* been determined through trial and error (must lead to div 13 at 24MHz). */
void clock_early_uart(void)
{
write32(CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE |
CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900), &clk_rst->clk_src_uarta);
writel(CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900),
&clk_rst->clk_src_uarta);
setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_UARTA);
udelay(2);
clrbits_le32(&clk_rst->rst_dev_l, CLK_L_UARTA);
@ -486,28 +475,24 @@ void clock_cpu0_config(void *entry)
{
void * const evp_cpu_reset = (uint8_t *)TEGRA_EVP_BASE + 0x100;
write32((uintptr_t)_estack, &maincpu_stack_pointer);
write32((uintptr_t)entry, &maincpu_entry_point);
write32((uintptr_t)&maincpu_setup, evp_cpu_reset);
writel((uintptr_t)_estack, &maincpu_stack_pointer);
writel((uintptr_t)entry, &maincpu_entry_point);
writel((uintptr_t)&maincpu_setup, evp_cpu_reset);
/* Set active CPU cluster to G */
clrbits_le32(&flow->cluster_control, 1);
// Set up cclk_brst and divider.
write32((CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) |
(CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) |
(CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) |
(CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) |
(CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28),
&clk_rst->cclk_brst_pol);
write32(CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB,
&clk_rst->super_cclk_div);
writel((CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) | (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28),
&clk_rst->cclk_brst_pol);
writel(CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB,
&clk_rst->super_cclk_div);
// Enable the clocks for CPUs 0-3.
uint32_t cpu_cmplx_clr = read32(&clk_rst->clk_cpu_cmplx_clr);
cpu_cmplx_clr |= CRC_CLK_CLR_CPU0_STP | CRC_CLK_CLR_CPU1_STP |
CRC_CLK_CLR_CPU2_STP | CRC_CLK_CLR_CPU3_STP;
write32(cpu_cmplx_clr, &clk_rst->clk_cpu_cmplx_clr);
writel(cpu_cmplx_clr, &clk_rst->clk_cpu_cmplx_clr);
// Enable other CPU related clocks.
setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_CPU);
@ -518,36 +503,23 @@ void clock_cpu0_config(void *entry)
void clock_cpu0_remove_reset(void)
{
// Disable the reset on the non-CPU parts of the fast cluster.
write32(CRC_RST_CPUG_CLR_NONCPU,
&clk_rst->rst_cpug_cmplx_clr);
writel(CRC_RST_CPUG_CLR_NONCPU, &clk_rst->rst_cpug_cmplx_clr);
// Disable the various resets on the CPUs.
write32(CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 |
CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 |
CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 |
CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 |
CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 |
CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 |
CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 |
CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 |
CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG,
&clk_rst->rst_cpug_cmplx_clr);
writel(CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 | CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 | CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 | CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 | CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 | CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 | CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 | CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG,
&clk_rst->rst_cpug_cmplx_clr);
// Disable the reset on the non-CPU parts of the slow cluster.
write32(CRC_RST_CPULP_CLR_NONCPU,
&clk_rst->rst_cpulp_cmplx_clr);
writel(CRC_RST_CPULP_CLR_NONCPU, &clk_rst->rst_cpulp_cmplx_clr);
// Disable the various resets on the LP CPU.
write32(CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 |
CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 |
CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG,
&clk_rst->rst_cpulp_cmplx_clr);
writel(CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG,
&clk_rst->rst_cpulp_cmplx_clr);
}
void clock_halt_avp(void)
{
for (;;) {
write32(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ |
FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT,
&flow->halt_cop_events);
writel(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT,
&flow->halt_cop_events);
}
}
@ -564,15 +536,12 @@ void clock_init(void)
/* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA
* features section in the TRM). */
write32(TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT |
TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT,
&clk_rst->clk_sys_rate);
write32(CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) <<
PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN |
PLL_OUT_RSTN, &clk_rst->pllc_out);
write32(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT |
SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT,
&clk_rst->sclk_brst_pol); /* sclk = 300 MHz */
writel(TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT | TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT,
&clk_rst->clk_sys_rate);
writel(CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN,
&clk_rst->pllc_out);
writel(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT,
&clk_rst->sclk_brst_pol); /* sclk = 300 MHz */
/* Change the oscillator drive strength (from U-Boot -- why?) */
clrsetbits_le32(&clk_rst->osc_ctrl, OSC_XOFS_MASK,
@ -590,16 +559,10 @@ void clock_init(void)
clrbits_le32(&clk_rst->pllx_misc3, PLLX_IDDQ_MASK);
/* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */
write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT |
(CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT,
&clk_rst->pllp_outa);
write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT |
(CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT,
&clk_rst->pllp_outb);
writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT,
&clk_rst->pllp_outa);
writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT,
&clk_rst->pllp_outb);
/* init pllx */
init_pll(&clk_rst->pllx_base, &clk_rst->pllx_misc,

View File

@ -282,17 +282,17 @@ inline static void write32(uint32_t val, void *addr)
inline static void setbits32(uint32_t bits, void *addr)
{
write32(read32(addr) | bits, addr);
writel(read32(addr) | bits, addr);
}
inline static void clrbits32(uint32_t bits, void *addr)
{
write32(read32(addr) & ~bits, addr);
writel(read32(addr) & ~bits, addr);
}
static void __attribute__((noreturn)) reset(void)
{
write32(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr);
writel(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr);
halt();
}
@ -337,7 +337,7 @@ static void config_oscillator(void)
osc_ctrl &= ~OSC_XOFS_MASK;
osc_ctrl |= (xofs << OSC_XOFS_SHIFT);
osc_ctrl |= OSC_XOE;
write32(osc_ctrl, clk_rst_osc_ctrl_ptr);
writel(osc_ctrl, clk_rst_osc_ctrl_ptr);
}
static void config_pllu(void)
@ -382,17 +382,17 @@ static void config_pllu(void)
// Configure PLLU.
uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE |
(divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT);
write32(base, clk_rst_pllu_base_ptr);
writel(base, clk_rst_pllu_base_ptr);
uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) |
(lfcon << PLLU_LFCON_SHIFT);
write32(misc, clk_rst_pllu_misc_ptr);
writel(misc, clk_rst_pllu_misc_ptr);
// Enable PLLU.
base &= ~PLLU_BYPASS;
base |= PLLU_ENABLE;
write32(base, clk_rst_pllu_base_ptr);
writel(base, clk_rst_pllu_base_ptr);
misc |= PLLU_LOCK_ENABLE;
write32(misc, clk_rst_pllu_misc_ptr);
writel(misc, clk_rst_pllu_misc_ptr);
}
static void config_tsc(void)
@ -400,26 +400,26 @@ static void config_tsc(void)
// Tell the TSC the oscillator frequency.
switch (get_osc_freq()) {
case OSC_FREQ_12:
write32(12000000, sysctr_cntfid0_ptr);
writel(12000000, sysctr_cntfid0_ptr);
break;
case OSC_FREQ_48:
write32(48000000, sysctr_cntfid0_ptr);
writel(48000000, sysctr_cntfid0_ptr);
break;
case OSC_FREQ_16P8:
write32(16800000, sysctr_cntfid0_ptr);
writel(16800000, sysctr_cntfid0_ptr);
break;
case OSC_FREQ_19P2:
write32(19200000, sysctr_cntfid0_ptr);
writel(19200000, sysctr_cntfid0_ptr);
break;
case OSC_FREQ_38P4:
write32(38400000, sysctr_cntfid0_ptr);
writel(38400000, sysctr_cntfid0_ptr);
break;
case OSC_FREQ_26:
write32(26000000, sysctr_cntfid0_ptr);
writel(26000000, sysctr_cntfid0_ptr);
break;
default:
// Default to 13MHz.
write32(13000000, sysctr_cntfid0_ptr);
writel(13000000, sysctr_cntfid0_ptr);
break;
}
@ -430,8 +430,8 @@ static void config_tsc(void)
static void enable_cpu_clocks(void)
{
// Enable the CPU complex clock.
write32(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr);
write32(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr);
writel(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr);
writel(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr);
}
@ -441,7 +441,7 @@ static void enable_cpu_clocks(void)
static void config_core_sight(void)
{
// Enable the CoreSight clock.
write32(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr);
writel(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr);
/*
* De-assert CoreSight reset.
@ -449,22 +449,22 @@ static void config_core_sight(void)
* now. It will be restored to its original clock source
* when the CPU-side restoration code runs.
*/
write32(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr);
writel(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr);
}
static void config_mselect(void)
{
// Set MSELECT clock source to PLLP with 1:4 divider.
write32((6 << MSELECT_CLK_DIV_SHIFT) | MSELECT_CLK_SRC_PLLP_OUT0,
clk_rst_clk_src_mselect_ptr);
writel((6 << MSELECT_CLK_DIV_SHIFT) | MSELECT_CLK_SRC_PLLP_OUT0,
clk_rst_clk_src_mselect_ptr);
// Enable clock to MSELECT.
write32(CLK_ENB_MSELECT, clk_rst_clk_enb_v_set_ptr);
writel(CLK_ENB_MSELECT, clk_rst_clk_enb_v_set_ptr);
udelay(2);
// Bring MSELECT out of reset.
write32(SWR_MSELECT_RST, clk_rst_rst_dev_v_clr_ptr);
writel(SWR_MSELECT_RST, clk_rst_rst_dev_v_clr_ptr);
}
@ -474,19 +474,16 @@ static void config_mselect(void)
static void clear_cpu_resets(void)
{
// Take the non-cpu of the G and LP clusters out of reset.
write32(CLR_NONCPURESET, clk_rst_rst_cpulp_cmplx_clr_ptr);
write32(CLR_NONCPURESET, clk_rst_rst_cpug_cmplx_clr_ptr);
writel(CLR_NONCPURESET, clk_rst_rst_cpulp_cmplx_clr_ptr);
writel(CLR_NONCPURESET, clk_rst_rst_cpug_cmplx_clr_ptr);
// Clear software controlled reset of the slow cluster.
write32(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0,
clk_rst_rst_cpulp_cmplx_clr_ptr);
writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0,
clk_rst_rst_cpulp_cmplx_clr_ptr);
// Clear software controlled reset of the fast cluster.
write32(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 |
CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 |
CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3,
clk_rst_rst_cpug_cmplx_clr_ptr);
writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3,
clk_rst_rst_cpug_cmplx_clr_ptr);
}
@ -516,7 +513,7 @@ static void power_on_partition(unsigned id)
uint32_t bit = 0x1 << id;
if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) {
// Partition is not on. Turn it on.
write32(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr);
writel(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr);
// Wait until the partition is powerd on.
while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit))
@ -546,8 +543,8 @@ static void power_on_main_cpu(void)
*/
uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr);
write32(orig_timer * (204000000 / 32768),
pmc_ctlr_cpupwrgood_timer_ptr);
writel(orig_timer * (204000000 / 32768),
pmc_ctlr_cpupwrgood_timer_ptr);
if (wakeup_on_lp()) {
power_on_partition(PARTID_C1NC);
@ -559,7 +556,7 @@ static void power_on_main_cpu(void)
}
// Restore the original PMC_CPUPWRGOOD_TIMER.
write32(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr);
writel(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr);
}
@ -581,17 +578,17 @@ void lp0_resume(void)
flow_ctlr_cluster_control_ptr);
// Program SUPER_CCLK_DIVIDER.
write32(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr);
writel(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr);
config_core_sight();
config_pllu();
// Set the CPU reset vector.
write32(get_wakeup_vector(), evp_cpu_reset_ptr);
writel(get_wakeup_vector(), evp_cpu_reset_ptr);
// Select CPU complex clock source.
write32(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr);
writel(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr);
config_mselect();
@ -602,14 +599,14 @@ void lp0_resume(void)
uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr);
ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK;
ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT;
write32(ack_width, clk_rst_cpu_softrst_ctrl2_ptr);
writel(ack_width, clk_rst_cpu_softrst_ctrl2_ptr);
config_tsc();
// Disable VPR.
write32(0, mc_video_protect_size_mb_ptr);
write32(VIDEO_PROTECT_WRITE_ACCESS_DISABLE,
mc_video_protect_reg_ctrl_ptr);
writel(0, mc_video_protect_size_mb_ptr);
writel(VIDEO_PROTECT_WRITE_ACCESS_DISABLE,
mc_video_protect_reg_ctrl_ptr);
enable_cpu_clocks();
@ -622,8 +619,8 @@ void lp0_resume(void)
// Halt the AVP.
while (1)
write32(FLOW_MODE_STOP | EVENT_JTAG,
flow_ctlr_halt_cop_events_ptr);
writel(FLOW_MODE_STOP | EVENT_JTAG,
flow_ctlr_halt_cop_events_ptr);
}

View File

@ -48,7 +48,7 @@ static void power_ungate_partition(uint32_t id)
pwrgate_toggle &= ~(PMC_PWRGATE_TOGGLE_PARTID_MASK);
pwrgate_toggle |= (id << PMC_PWRGATE_TOGGLE_PARTID_SHIFT);
pwrgate_toggle |= PMC_PWRGATE_TOGGLE_START;
write32(pwrgate_toggle, &pmc->pwrgate_toggle);
writel(pwrgate_toggle, &pmc->pwrgate_toggle);
// Wait for the request to be accepted.
while (read32(&pmc->pwrgate_toggle) & PMC_PWRGATE_TOGGLE_START)
@ -73,12 +73,12 @@ void power_enable_and_ungate_cpu(void)
* Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (150MHz),
* set it for 5ms as per SysEng (5ms * PCLK_KHZ * 1000 / 1s).
*/
write32((TEGRA_PCLK_KHZ * 5), &pmc->cpupwrgood_timer);
writel((TEGRA_PCLK_KHZ * 5), &pmc->cpupwrgood_timer);
uint32_t cntrl = read32(&pmc->cntrl);
cntrl &= ~PMC_CNTRL_CPUPWRREQ_POLARITY;
cntrl |= PMC_CNTRL_CPUPWRREQ_OE;
write32(cntrl, &pmc->cntrl);
writel(cntrl, &pmc->cntrl);
power_ungate_partition(POWER_PARTID_CRAIL);

View File

@ -230,7 +230,7 @@ int spi_claim_bus(struct spi_slave *slave)
else
val |= SPI_CMD1_CS_SW_VAL;
write32(val, &regs->command1);
writel(val, &regs->command1);
return 0;
}
@ -246,7 +246,7 @@ void spi_release_bus(struct spi_slave *slave)
else
val &= ~SPI_CMD1_CS_SW_VAL;
write32(val, &regs->command1);
writel(val, &regs->command1);
}
static void dump_fifo_status(struct tegra_spi_channel *spi)
@ -383,12 +383,12 @@ static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi,
/* BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and
* PIO transfers */
write32(todo - 1, &spi->regs->dma_blk);
writel(todo - 1, &spi->regs->dma_blk);
if (dir == SPI_SEND) {
unsigned int to_fifo = bytes;
while (to_fifo) {
write32(*p, &spi->regs->tx_fifo);
writel(*p, &spi->regs->tx_fifo);
p++;
to_fifo--;
}
@ -493,11 +493,11 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* ensure bytes to send will be visible to DMA controller */
dcache_clean_by_mva(spi->out_buf, bytes);
write32((u32)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr);
write32((u32)spi->out_buf, &spi->dma_out->regs->ahb_ptr);
writel((u32)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr);
writel((u32)spi->out_buf, &spi->dma_out->regs->ahb_ptr);
setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_out);
write32(wcount, &spi->dma_out->regs->wcount);
writel(wcount, &spi->dma_out->regs->wcount);
} else {
spi->dma_in = dma_claim();
if (!spi->dma_in)
@ -506,15 +506,15 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* avoid data collisions */
dcache_clean_invalidate_by_mva(spi->in_buf, bytes);
write32((u32)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr);
write32((u32)spi->in_buf, &spi->dma_in->regs->ahb_ptr);
writel((u32)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr);
writel((u32)spi->in_buf, &spi->dma_in->regs->ahb_ptr);
clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_in);
write32(wcount, &spi->dma_in->regs->wcount);
writel(wcount, &spi->dma_in->regs->wcount);
}
/* BLOCK_SIZE starts at n-1 */
write32(todo - 1, &spi->regs->dma_blk);
writel(todo - 1, &spi->regs->dma_blk);
return todo;
}

View File

@ -56,20 +56,19 @@ static void tegra124_uart_init(struct tegra124_uart *uart_ptr)
tegra124_uart_tx_flush(uart_ptr);
// Disable interrupts.
write8(0, &uart_ptr->ier);
writeb(0, &uart_ptr->ier);
// Force DTR and RTS to high.
write8(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
writeb(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
// Set line configuration, access divisor latches.
write8(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
writeb(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
// Set the divisor.
write8(divisor & 0xff, &uart_ptr->dll);
write8((divisor >> 8) & 0xff, &uart_ptr->dlm);
writeb(divisor & 0xff, &uart_ptr->dll);
writeb((divisor >> 8) & 0xff, &uart_ptr->dlm);
// Hide the divisor latches.
write8(line_config, &uart_ptr->lcr);
writeb(line_config, &uart_ptr->lcr);
// Enable FIFOs, and clear receive and transmit.
write8(UART8250_FCR_FIFO_EN |
UART8250_FCR_CLEAR_RCVR |
UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr);
writeb(UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT,
&uart_ptr->fcr);
}
static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr)
@ -82,7 +81,7 @@ static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr)
static void tegra124_uart_tx_byte(struct tegra124_uart *uart_ptr, unsigned char data)
{
while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE));
write8(data, &uart_ptr->thr);
writeb(data, &uart_ptr->thr);
}
static void tegra124_uart_tx_flush(struct tegra124_uart *uart_ptr)

View File

@ -187,9 +187,9 @@ void trustzone_region_init(void)
return;
/* Set the carveout region. */
write32(tz_base_mib << 20, &mc->security_cfg0);
write32(tz_size_mib, &mc->security_cfg1);
writel(tz_base_mib << 20, &mc->security_cfg0);
writel(tz_size_mib, &mc->security_cfg1);
/* Enable SMMU translations */
write32(MC_SMMU_CONFIG_ENABLE, &mc->smmu_config);
writel(MC_SMMU_CONFIG_ENABLE, &mc->smmu_config);
}

View File

@ -46,7 +46,7 @@ static void save_odmdata(void)
bct_offset = read32((void *)(TEGRA_SRAM_BASE + BCT_OFFSET_IN_BIT));
if (bct_offset > TEGRA_SRAM_BASE && bct_offset < TEGRA_SRAM_MAX) {
odmdata = read32((void *)(bct_offset + ODMDATA_OFFSET_IN_BCT));
write32(odmdata, &pmc->odmdata);
writel(odmdata, &pmc->odmdata);
}
}

View File

@ -46,12 +46,12 @@ static int ccplex_start(void)
struct tegra_pmc_regs * const pmc = PMC_REGS;
/* Set the handshake bit to be knocked down. */
write32(handshake_mask, &pmc->scratch118);
writel(handshake_mask, &pmc->scratch118);
/* Assert nCXRSET[1] */
reg = read32(CLK_RST_REG(rst_cpu_cmplx_set));
reg |= cxreset1_mask;
write32(reg, CLK_RST_REG(rst_cpu_cmplx_set));
writel(reg, CLK_RST_REG(rst_cpu_cmplx_set));
stopwatch_init_msecs_expire(&sw, timeout_ms);
while (1) {
@ -140,14 +140,14 @@ static void request_ram_repair(void)
/* Perform cluster 0 ram repair */
reg = read32(&flow->ram_repair);
reg |= req;
write32(reg, &flow->ram_repair);
writel(reg, &flow->ram_repair);
while ((read32(&flow->ram_repair) & sts) != sts)
;
/* Perform cluster 1 ram repair */
reg = read32(&flow->ram_repair_cluster1);
reg |= req;
write32(reg, &flow->ram_repair_cluster1);
writel(reg, &flow->ram_repair_cluster1);
while ((read32(&flow->ram_repair_cluster1) & sts) != sts)
;
@ -169,11 +169,11 @@ void ccplex_cpu_prepare(void)
static void start_common_clocks(void)
{
/* Clear fast CPU partition reset. */
write32(CRC_RST_CPUG_CLR_NONCPU, CLK_RST_REG(rst_cpug_cmplx_clr));
writel(CRC_RST_CPUG_CLR_NONCPU, CLK_RST_REG(rst_cpug_cmplx_clr));
/* Clear reset of L2 and CoreSight components. */
write32(CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG,
CLK_RST_REG(rst_cpug_cmplx_clr));
writel(CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG,
CLK_RST_REG(rst_cpug_cmplx_clr));
}
void ccplex_cpu_start(void *entry_addr)

View File

@ -186,11 +186,11 @@ void clock_init_arm_generic_timer(void)
set_cntfrq(freq);
/* Record the system timer frequency. */
write32(freq, &sysctr->cntfid0);
writel(freq, &sysctr->cntfid0);
/* Enable the system counter. */
uint32_t cntcr = read32(&sysctr->cntcr);
cntcr |= SYSCTR_CNTCR_EN | SYSCTR_CNTCR_HDBG;
write32(cntcr, &sysctr->cntcr);
writel(cntcr, &sysctr->cntcr);
}
#define SOR0_CLK_SEL0 (1 << 14)
@ -243,25 +243,14 @@ static void init_utmip_pll(void)
clrbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */
udelay(1);
write32(80 << 16 | /* (rst) phy_divn */
1 << 8 | /* (rst) phy_divm */
0, CLK_RST_REG(utmip_pll_cfg0));/* 960MHz * 1 / 80 == 12 MHz */
writel(80 << 16 | 1 << 8 | 0, CLK_RST_REG(utmip_pll_cfg0));/* 960MHz * 1 / 80 == 12 MHz */
write32(div_round_up(khz, 8000) << 27 | /* pllu_enbl_cnt / 8 (1us) */
0 << 16 | /* PLLU pwrdn */
0 << 14 | /* pll_enable pwrdn */
0 << 12 | /* pll_active pwrdn */
div_round_up(khz, 102) << 0 | /* phy_stbl_cnt / 256 (2.5ms) */
0, CLK_RST_REG(utmip_pll_cfg1));
writel(div_round_up(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | div_round_up(khz, 102) << 0 | 0,
CLK_RST_REG(utmip_pll_cfg1));
/* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */
write32(0 << 24 | /* SAMP_D/XDEV pwrdn */
div_round_up(khz, 3200) << 18 | /* phy_actv_cnt / 16 (5us) */
div_round_up(khz, 256) << 6 | /* pllu_stbl_cnt / 256 (1ms) */
0 << 4 | /* SAMP_C/USB3 pwrdn */
0 << 2 | /* SAMP_B/XHOST pwrdn */
0 << 0 | /* SAMP_A/USBD pwrdn */
0, CLK_RST_REG(utmip_pll_cfg2));
writel(0 << 24 | div_round_up(khz, 3200) << 18 | div_round_up(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0,
CLK_RST_REG(utmip_pll_cfg2));
setbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */
}
@ -398,9 +387,8 @@ u32 clock_configure_plld(u32 frequency)
* been determined through trial and error (must lead to div 13 at 24MHz). */
void clock_early_uart(void)
{
write32(CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT |
CLK_UART_DIV_OVERRIDE |
CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900), CLK_RST_REG(clk_src_uarta));
writel(CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900),
CLK_RST_REG(clk_src_uarta));
clock_enable_clear_reset_l(CLK_L_UARTA);
}
@ -503,8 +491,8 @@ void clock_cpu0_config(void)
*/
do {
if (readl(&clst_clk->misc_ctrl) & CLK_SWITCH_MATCH) {
write32((CC_CCLK_BRST_POL_PLLX_OUT0_LJ << 28),
&clst_clk->cclk_brst_pol);
writel((CC_CCLK_BRST_POL_PLLX_OUT0_LJ << 28),
&clst_clk->cclk_brst_pol);
break;
}
@ -524,9 +512,8 @@ void clock_cpu0_config(void)
void clock_halt_avp(void)
{
for (;;)
write32(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ |
FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT,
&flow->halt_cop_events);
writel(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT,
&flow->halt_cop_events);
}
void clock_init(void)
@ -542,13 +529,12 @@ void clock_init(void)
/* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA
* features section in the TRM). */
write32(1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT,
CLK_RST_REG(clk_sys_rate)); /* pclk = hclk = sclk/2 */
write32(CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_CLKEN | PLL_OUT_RSTN, CLK_RST_REG(pllc_out));
write32(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT |
SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT,
CLK_RST_REG(sclk_brst_pol)); /* sclk = 300 MHz */
writel(1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT,
CLK_RST_REG(clk_sys_rate)); /* pclk = hclk = sclk/2 */
writel(CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN,
CLK_RST_REG(pllc_out));
writel(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT,
CLK_RST_REG(sclk_brst_pol)); /* sclk = 300 MHz */
/* Change the oscillator drive strength (from U-Boot -- why?) */
clrsetbits_le32(CLK_RST_REG(osc_ctrl), OSC_XOFS_MASK,
@ -563,16 +549,10 @@ void clock_init(void)
OSC_DRIVE_STRENGTH << PMC_OSC_EDPD_OVER_XOFS_SHIFT);
/* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */
write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT |
(CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT,
CLK_RST_REG(pllp_outa));
write32((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT |
(CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT |
PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT,
CLK_RST_REG(pllp_outb));
writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT,
CLK_RST_REG(pllp_outa));
writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT,
CLK_RST_REG(pllp_outb));
/* init pllu */
init_pll(CLK_RST_REG(pllu_base), CLK_RST_REG(pllu_misc),

View File

@ -40,15 +40,15 @@ static void enable_core_clocks(int cpu)
/* Clear reset of CPU components. */
if (cpu == 0)
write32(cpu0_clocks, CLK_RST_REG(rst_cpug_cmplx_clr));
writel(cpu0_clocks, CLK_RST_REG(rst_cpug_cmplx_clr));
else
write32(cpu1_clocks, CLK_RST_REG(rst_cpug_cmplx_clr));
writel(cpu1_clocks, CLK_RST_REG(rst_cpug_cmplx_clr));
}
static void set_armv8_32bit_reset_vector(uintptr_t entry)
{
void * const evp_cpu_reset_vector = EVP_CPU_RESET_VECTOR;
write32(entry, evp_cpu_reset_vector);
writel(entry, evp_cpu_reset_vector);
}
static void set_armv8_64bit_reset_vector(uintptr_t entry)
@ -56,8 +56,8 @@ static void set_armv8_64bit_reset_vector(uintptr_t entry)
struct tegra_pmc_regs * const pmc = PMC_REGS;
/* Currently assume 32-bit addresses only. */
write32(entry, &pmc->secure_scratch34);
write32(0, &pmc->secure_scratch35);
writel(entry, &pmc->secure_scratch34);
writel(0, &pmc->secure_scratch35);
}
void cpu_prepare_startup(void *entry_64)

View File

@ -869,7 +869,7 @@ static int dsi_enable(struct soc_nvidia_tegra132_config *config)
tegra_output_dsi_setup_clock(dsi_a, config);
/* configure APB_MISC_GP_MIPI_PAD_CTRL_0 */
write32(DSIB_MODE_DSI, (unsigned int *)APB_MISC_GP_MIPI_PAD_CTRL_0);
writel(DSIB_MODE_DSI, (unsigned int *)APB_MISC_GP_MIPI_PAD_CTRL_0);
/* configure phy interface timing registers */
tegra_dsi_set_phy_timing(dsi_a);

View File

@ -62,7 +62,7 @@ static uint32_t flowctrl_read_cpu_csr(int cpu)
static void flowctrl_write_cpu_csr(int cpu, uint32_t val)
{
write32(val, tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]);
writel(val, tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]);
val = readl(tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]);
}

View File

@ -43,7 +43,7 @@ static void remove_clamps(int id)
return;
/* Remove clamp */
write32((1 << id), &pmc->remove_clamping_cmd);
writel((1 << id), &pmc->remove_clamping_cmd);
/* Wait for clamp off */
while (partition_clamp_on(id))
@ -86,7 +86,7 @@ void soc_configure_i2c6pad(void)
soc_configure_host1x();
/* Now we can write the I2C6 mux in DPAUX */
write32(I2C6_PADCTL, (void *)DPAUX_HYBRID_PADCTL);
writel(I2C6_PADCTL, (void *)DPAUX_HYBRID_PADCTL);
/*
* Delay before turning off Host1X/DPAUX clocks.

View File

@ -261,17 +261,17 @@ inline static void write32(uint32_t val, void *addr)
inline static void setbits32(uint32_t bits, void *addr)
{
write32(read32(addr) | bits, addr);
writel(read32(addr) | bits, addr);
}
inline static void clrbits32(uint32_t bits, void *addr)
{
write32(read32(addr) & ~bits, addr);
writel(read32(addr) & ~bits, addr);
}
static void __attribute__((noreturn)) reset(void)
{
write32(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr);
writel(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr);
halt();
}
@ -370,18 +370,18 @@ static void enable_uart(void)
clrbits32(uart_mask, uart_rst_reg);
/* Program UART clock source: PLLP (408000000) */
write32(0, uart_clk_source);
writel(0, uart_clk_source);
/* Program 115200n8 to the uart port */
/* baud-rate of 115200 */
write32(LCR_DLAB, (uart_base + UART_LCR));
write32((UART_RATE_115200 & 0xff), (uart_base + UART_THR_DLAB));
write32((UART_RATE_115200 >> 8), (uart_base + UART_IER_DLAB));
writel(LCR_DLAB, (uart_base + UART_LCR));
writel((UART_RATE_115200 & 0xff), (uart_base + UART_THR_DLAB));
writel((UART_RATE_115200 >> 8), (uart_base + UART_IER_DLAB));
/* 8-bit and no parity */
write32(LCR_WD_SIZE_8, (uart_base + UART_LCR));
writel(LCR_WD_SIZE_8, (uart_base + UART_LCR));
/* enable and clear RX/TX FIFO */
write32((FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO),
(uart_base + UART_IIR_FCR));
writel((FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO),
(uart_base + UART_IIR_FCR));
}
/* Accessors. */
@ -401,7 +401,7 @@ static unsigned get_osc_freq(void)
static void enable_jtag(void)
{
write32(PP_CONFIG_CTL_JTAG, misc_pp_config_ctl_ptr);
writel(PP_CONFIG_CTL_JTAG, misc_pp_config_ctl_ptr);
}
/* Clock configuration. */
@ -417,7 +417,7 @@ static void config_oscillator(void)
osc_ctrl &= ~OSC_XOFS_MASK;
osc_ctrl |= (xofs << OSC_XOFS_SHIFT);
osc_ctrl |= OSC_XOE;
write32(osc_ctrl, clk_rst_osc_ctrl_ptr);
writel(osc_ctrl, clk_rst_osc_ctrl_ptr);
}
static void config_pllu(void)
@ -462,24 +462,24 @@ static void config_pllu(void)
// Configure PLLU.
uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE |
(divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT);
write32(base, clk_rst_pllu_base_ptr);
writel(base, clk_rst_pllu_base_ptr);
uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) |
(lfcon << PLLU_LFCON_SHIFT);
write32(misc, clk_rst_pllu_misc_ptr);
writel(misc, clk_rst_pllu_misc_ptr);
// Enable PLLU.
base &= ~PLLU_BYPASS;
base |= PLLU_ENABLE;
write32(base, clk_rst_pllu_base_ptr);
writel(base, clk_rst_pllu_base_ptr);
misc |= PLLU_LOCK_ENABLE;
write32(misc, clk_rst_pllu_misc_ptr);
writel(misc, clk_rst_pllu_misc_ptr);
}
static void enable_cpu_clocks(void)
{
// Enable the CPU complex clock.
write32(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr);
write32(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr);
writel(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr);
writel(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr);
}
@ -489,7 +489,7 @@ static void enable_cpu_clocks(void)
static void config_core_sight(void)
{
// Enable the CoreSight clock.
write32(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr);
writel(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr);
/*
* De-assert CoreSight reset.
@ -497,7 +497,7 @@ static void config_core_sight(void)
* now. It will be restored to its original clock source
* when the CPU-side restoration code runs.
*/
write32(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr);
writel(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr);
}
@ -508,11 +508,11 @@ static void clear_cpu_resets(void)
/* Hold CPU1 in reset */
setbits32(SET_CXRESET1, clk_rst_rst_cpulp_cmplx_set_ptr);
write32(CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG,
clk_rst_rst_cpug_cmplx_clr_ptr);
writel(CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG,
clk_rst_rst_cpug_cmplx_clr_ptr);
write32(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0,
clk_rst_rst_cpug_cmplx_clr_ptr);
writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0,
clk_rst_rst_cpug_cmplx_clr_ptr);
}
@ -542,7 +542,7 @@ static void power_on_partition(unsigned id)
uint32_t bit = 0x1 << id;
if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) {
// Partition is not on. Turn it on.
write32(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr);
writel(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr);
// Wait until the partition is powerd on.
while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit))
@ -572,15 +572,15 @@ static void power_on_main_cpu(void)
*/
uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr);
write32(orig_timer * (204000000 / 32768),
pmc_ctlr_cpupwrgood_timer_ptr);
writel(orig_timer * (204000000 / 32768),
pmc_ctlr_cpupwrgood_timer_ptr);
power_on_partition(PARTID_CRAIL);
power_on_partition(PARTID_C0NC);
power_on_partition(PARTID_CE0);
// Restore the original PMC_CPUPWRGOOD_TIMER.
write32(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr);
writel(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr);
}
@ -609,7 +609,7 @@ void lp0_resume(void)
config_oscillator();
// Program SUPER_CCLK_DIVIDER.
write32(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr);
writel(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr);
config_core_sight();
@ -623,12 +623,12 @@ void lp0_resume(void)
* T132 always resets to AARCH32 and SW needs to write RMR_EL3
* to bootstrap into AARCH64.
*/
write32(get_wakeup_vector(), pmc_ctlr_secure_scratch34_ptr);
write32(0, pmc_ctlr_secure_scratch35_ptr);
write32((uint32_t)aarch64_trampoline, evp_cpu_reset_ptr);
writel(get_wakeup_vector(), pmc_ctlr_secure_scratch34_ptr);
writel(0, pmc_ctlr_secure_scratch35_ptr);
writel((uint32_t)aarch64_trampoline, evp_cpu_reset_ptr);
// Select CPU complex clock source.
write32(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr);
writel(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr);
// Disable PLLX since it isn't used as CPU clock source.
clrbits32(PLLX_ENABLE, clk_rst_pllx_base_ptr);
@ -637,12 +637,12 @@ void lp0_resume(void)
uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr);
ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK;
ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT;
write32(ack_width, clk_rst_cpu_softrst_ctrl2_ptr);
writel(ack_width, clk_rst_cpu_softrst_ctrl2_ptr);
// Disable VPR.
write32(0, mc_video_protect_size_mb_ptr);
write32(VIDEO_PROTECT_WRITE_ACCESS_DISABLE,
mc_video_protect_reg_ctrl_ptr);
writel(0, mc_video_protect_size_mb_ptr);
writel(VIDEO_PROTECT_WRITE_ACCESS_DISABLE,
mc_video_protect_reg_ctrl_ptr);
enable_cpu_clocks();
@ -655,8 +655,8 @@ void lp0_resume(void)
// Halt the AVP.
while (1)
write32(FLOW_MODE_STOP | EVENT_JTAG,
flow_ctlr_halt_cop_events_ptr);
writel(FLOW_MODE_STOP | EVENT_JTAG,
flow_ctlr_halt_cop_events_ptr);
}

View File

@ -36,7 +36,7 @@ static inline uint32_t pad_get_pinmux(int index)
static inline void pad_set_pinmux(int index, uint32_t reg)
{
return write32(reg, &pinmux_regs[index]);
return writel(reg, &pinmux_regs[index]);
}
static inline void pad_set_gpio_out(int gpio_index, int val)
@ -45,10 +45,10 @@ static inline void pad_set_gpio_out(int gpio_index, int val)
int port = gpio_index_to_port(gpio_index);
int bit = gpio_to_bit(gpio_index);
write32((1 << (bit + GPIO_GPIOS_PER_PORT)) | (val << bit),
&regs->out_value_mask[port]);
write32((1 << (bit + GPIO_GPIOS_PER_PORT)) | (1 << bit),
&regs->out_enable_mask[port]);
writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (val << bit),
&regs->out_value_mask[port]);
writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (1 << bit),
&regs->out_enable_mask[port]);
}
static inline void pad_set_mode(int gpio_index, int sfio_or_gpio)
@ -57,8 +57,8 @@ static inline void pad_set_mode(int gpio_index, int sfio_or_gpio)
int port = gpio_index_to_port(gpio_index);
int bit = gpio_to_bit(gpio_index);
write32((1 << (bit + GPIO_GPIOS_PER_PORT)) | (sfio_or_gpio << bit),
&regs->config_mask[port]);
writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (sfio_or_gpio << bit),
&regs->config_mask[port]);
}
static inline void pad_set_gpio_mode(int gpio_index)

View File

@ -41,7 +41,7 @@ void power_ungate_partition(uint32_t id)
pwrgate_toggle &= ~(PMC_PWRGATE_TOGGLE_PARTID_MASK);
pwrgate_toggle |= (id << PMC_PWRGATE_TOGGLE_PARTID_SHIFT);
pwrgate_toggle |= PMC_PWRGATE_TOGGLE_START;
write32(pwrgate_toggle, &pmc->pwrgate_toggle);
writel(pwrgate_toggle, &pmc->pwrgate_toggle);
/* Wait for the request to be accepted. */
while (read32(&pmc->pwrgate_toggle) & PMC_PWRGATE_TOGGLE_START)

View File

@ -83,9 +83,9 @@ static void lock_down_vpr(void)
{
struct tegra_mc_regs *regs = (void *)(uintptr_t)TEGRA_MC_BASE;
write32(0, &regs->video_protect_bom);
write32(0, &regs->video_protect_size_mb);
write32(1, &regs->video_protect_reg_ctrl);
writel(0, &regs->video_protect_bom);
writel(0, &regs->video_protect_size_mb);
writel(1, &regs->video_protect_reg_ctrl);
}
static void soc_init(device_t dev)

View File

@ -230,7 +230,7 @@ int spi_claim_bus(struct spi_slave *slave)
else
val |= SPI_CMD1_CS_SW_VAL;
write32(val, &regs->command1);
writel(val, &regs->command1);
return 0;
}
@ -246,7 +246,7 @@ void spi_release_bus(struct spi_slave *slave)
else
val &= ~SPI_CMD1_CS_SW_VAL;
write32(val, &regs->command1);
writel(val, &regs->command1);
}
static void dump_fifo_status(struct tegra_spi_channel *spi)
@ -383,12 +383,12 @@ static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi,
/* BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and
* PIO transfers */
write32(todo - 1, &spi->regs->dma_blk);
writel(todo - 1, &spi->regs->dma_blk);
if (dir == SPI_SEND) {
unsigned int to_fifo = bytes;
while (to_fifo) {
write32(*p, &spi->regs->tx_fifo);
writel(*p, &spi->regs->tx_fifo);
p++;
to_fifo--;
}
@ -493,11 +493,12 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* ensure bytes to send will be visible to DMA controller */
dcache_clean_by_mva(spi->out_buf, bytes);
write32((uintptr_t)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr);
write32((uintptr_t)spi->out_buf, &spi->dma_out->regs->ahb_ptr);
writel((uintptr_t) & spi->regs->tx_fifo,
&spi->dma_out->regs->apb_ptr);
writel((uintptr_t)spi->out_buf, &spi->dma_out->regs->ahb_ptr);
setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_out);
write32(wcount, &spi->dma_out->regs->wcount);
writel(wcount, &spi->dma_out->regs->wcount);
} else {
spi->dma_in = dma_claim();
if (!spi->dma_in)
@ -506,15 +507,16 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* avoid data collisions */
dcache_clean_invalidate_by_mva(spi->in_buf, bytes);
write32((uintptr_t)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr);
write32((uintptr_t)spi->in_buf, &spi->dma_in->regs->ahb_ptr);
writel((uintptr_t)&spi->regs->rx_fifo,
&spi->dma_in->regs->apb_ptr);
writel((uintptr_t)spi->in_buf, &spi->dma_in->regs->ahb_ptr);
clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_in);
write32(wcount, &spi->dma_in->regs->wcount);
writel(wcount, &spi->dma_in->regs->wcount);
}
/* BLOCK_SIZE starts at n-1 */
write32(todo - 1, &spi->regs->dma_blk);
writel(todo - 1, &spi->regs->dma_blk);
return todo;
}

View File

@ -63,20 +63,19 @@ static void tegra132_uart_init(struct tegra132_uart *uart_ptr)
tegra132_uart_tx_flush(uart_ptr);
// Disable interrupts.
write8(0, &uart_ptr->ier);
writeb(0, &uart_ptr->ier);
// Force DTR and RTS to high.
write8(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
writeb(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
// Set line configuration, access divisor latches.
write8(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
writeb(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
// Set the divisor.
write8(divisor & 0xff, &uart_ptr->dll);
write8((divisor >> 8) & 0xff, &uart_ptr->dlm);
writeb(divisor & 0xff, &uart_ptr->dll);
writeb((divisor >> 8) & 0xff, &uart_ptr->dlm);
// Hide the divisor latches.
write8(line_config, &uart_ptr->lcr);
writeb(line_config, &uart_ptr->lcr);
// Enable FIFOs, and clear receive and transmit.
write8(UART8250_FCR_FIFO_EN |
UART8250_FCR_CLEAR_RCVR |
UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr);
writeb(UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT,
&uart_ptr->fcr);
}
static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr)
@ -89,7 +88,7 @@ static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr)
static void tegra132_uart_tx_byte(struct tegra132_uart *uart_ptr, unsigned char data)
{
while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE));
write8(data, &uart_ptr->thr);
writeb(data, &uart_ptr->thr);
}
static void tegra132_uart_tx_flush(struct tegra132_uart *uart_ptr)

View File

@ -126,22 +126,17 @@ void nand_clock_config(void)
void usb_clock_config(void)
{
/* Magic clock initialization numbers, nobody knows how they work... */
write32(0x10, USB30_MASTER_CLK_CTL_REG);
write32(0x10, USB30_1_MASTER_CLK_CTL_REG);
write32(0x500DF, USB30_MASTER_CLK_MD);
write32(0xE40942, USB30_MASTER_CLK_NS);
write32(0x100D7, USB30_MOC_UTMI_CLK_MD);
write32(0xD80942, USB30_MOC_UTMI_CLK_NS);
write32(0x10, USB30_MOC_UTMI_CLK_CTL);
write32(0x10, USB30_1_MOC_UTMI_CLK_CTL);
writel(0x10, USB30_MASTER_CLK_CTL_REG);
writel(0x10, USB30_1_MASTER_CLK_CTL_REG);
writel(0x500DF, USB30_MASTER_CLK_MD);
writel(0xE40942, USB30_MASTER_CLK_NS);
writel(0x100D7, USB30_MOC_UTMI_CLK_MD);
writel(0xD80942, USB30_MOC_UTMI_CLK_NS);
writel(0x10, USB30_MOC_UTMI_CLK_CTL);
writel(0x10, USB30_1_MOC_UTMI_CLK_CTL);
write32(1 << 5 | /* assert port2 HS PHY async reset */
1 << 4 | /* assert master async reset */
1 << 3 | /* assert sleep async reset */
1 << 2 | /* assert MOC UTMI async reset */
1 << 1 | /* assert power-on async reset */
1 << 0 | /* assert PHY async reset */
0, USB30_RESET);
writel(1 << 5 | 1 << 4 | 1 << 3 | 1 << 2 | 1 << 1 | 1 << 0 | 0,
USB30_RESET);
udelay(5);
write32(0, USB30_RESET); /* deassert all USB resets again */
writel(0, USB30_RESET); /* deassert all USB resets again */
}

View File

@ -101,33 +101,16 @@ static struct usb_dwc3 * const usb_host2_dwc3 = (void *)USB_HOST2_DWC3_BASE;
static void setup_dwc3(struct usb_dwc3 *dwc3)
{
write32(0x1 << 31 | /* assert PHY soft reset */
0x1 << 25 | /* (default) U1/U2 exit fail -> recovery? */
0x1 << 24 | /* (default) activate PHY low power states */
0x1 << 19 | /* (default) PHY low power delay value */
0x1 << 18 | /* (default) activate PHY low power delay */
0x1 << 1 | /* (default) Tx deemphasis value */
0x1 << 0 | /* (default) elastic buffer mode */
0, &dwc3->usb3pipectl);
writel(0x1 << 31 | 0x1 << 25 | 0x1 << 24 | 0x1 << 19 | 0x1 << 18 | 0x1 << 1 | 0x1 << 0 | 0,
&dwc3->usb3pipectl);
write32(0x1 << 31 | /* assert PHY soft reset */
0x9 << 10 | /* (default) PHY clock turnaround 8-bit UTMI+ */
0x1 << 8 | /* (default) enable PHY sleep in L1 */
0x1 << 6 | /* (default) enable PHY suspend */
0, &dwc3->usb2phycfg);
writel(0x1 << 31 | 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0,
&dwc3->usb2phycfg);
write32(0x2 << 19 | /* (default) suspend clock scaling */
0x1 << 16 | /* retry SS three times before HS downgrade */
0x1 << 12 | /* port capability HOST */
0x1 << 11 | /* assert core soft reset */
0x1 << 10 | /* (default) sync ITP to refclk */
0x1 << 2 | /* U2 exit after 8us LFPS (instead of 248ns) */
0, &dwc3->ctl);
writel(0x2 << 19 | 0x1 << 16 | 0x1 << 12 | 0x1 << 11 | 0x1 << 10 | 0x1 << 2 | 0,
&dwc3->ctl);
write32(0x32 << 22 | /* (default) reference clock period in ns */
0x1 << 15 | /* (default) XHCI compliant device addressing */
0x10 << 0 | /* (default) devices time out after 32us */
0, &dwc3->uctl);
writel(0x32 << 22 | 0x1 << 15 | 0x10 << 0 | 0, &dwc3->uctl);
udelay(5);
@ -138,34 +121,16 @@ static void setup_dwc3(struct usb_dwc3 *dwc3)
static void setup_phy(struct usb_qc_phy *phy)
{
write32(0x1 << 24 | /* Indicate VBUS power present */
0x1 << 8 | /* Enable USB3 ref clock to prescaler */
0x1 << 7 | /* assert SS PHY reset */
0x19 << 0 | /* (default) reference clock multiplier */
0, &phy->ss_phy_ctrl);
writel(0x1 << 24 | 0x1 << 8 | 0x1 << 7 | 0x19 << 0 | 0,
&phy->ss_phy_ctrl);
write32(0x1 << 26 | /* (default) unclamp DPSE/DMSE VLS */
0x1 << 25 | /* (default) select freeclk for utmi_clk */
0x1 << 24 | /* (default) unclamp DMSE VLS */
0x1 << 21 | /* (default) enable UTMI clock */
0x1 << 20 | /* set OTG VBUS as valid */
0x1 << 18 | /* use ref clock from core */
0x1 << 17 | /* (default) unclamp DPSE VLS */
0x1 << 11 | /* force xo/bias/pll to stay on in suspend */
0x1 << 9 | /* (default) unclamp IDHV */
0x1 << 8 | /* (default) unclamp VLS (again???) */
0x1 << 7 | /* (default) unclamp HV VLS */
0x7 << 4 | /* select frequency (no idea which one) */
0x1 << 1 | /* (default) "retention enable" */
0, &phy->hs_phy_ctrl);
writel(0x1 << 26 | 0x1 << 25 | 0x1 << 24 | 0x1 << 21 | 0x1 << 20 | 0x1 << 18 | 0x1 << 17 | 0x1 << 11 | 0x1 << 9 | 0x1 << 8 | 0x1 << 7 | 0x7 << 4 | 0x1 << 1 | 0,
&phy->hs_phy_ctrl);
write32(0x6e << 20 | /* full TX swing amplitude */
0x20 << 14 | /* (default) 6dB TX deemphasis */
0x17 << 8 | /* 3.5dB TX deemphasis */
0x9 << 3 | /* (default) LoS detector level */
0, &phy->ss_phy_param1);
writel(0x6e << 20 | 0x20 << 14 | 0x17 << 8 | 0x9 << 3 | 0,
&phy->ss_phy_param1);
write32(0x1 << 2, &phy->general_cfg); /* set XHCI 1.00 compliance */
writel(0x1 << 2, &phy->general_cfg); /* set XHCI 1.00 compliance */
udelay(5);
clrbits_le32(&phy->ss_phy_ctrl, 0x1 << 7); /* deassert SS PHY reset */
@ -176,9 +141,9 @@ static void crport_handshake(void *capture_reg, void *acknowledge_bit, u32 data)
int usec = 100;
if (capture_reg)
write32(data, capture_reg);
writel(data, capture_reg);
write32(0x1 << 0, acknowledge_bit);
writel(0x1 << 0, acknowledge_bit);
while (read32(acknowledge_bit) && --usec)
udelay(1);

View File

@ -80,17 +80,17 @@ int vb2ex_hwcrypto_digest_init(enum vb2_hash_algorithm hash_alg,
return VB2_ERROR_EX_HWCRYPTO_UNSUPPORTED;
}
write32(RK_SETBITS(1 << 6), &crypto->ctrl); /* Assert HASH_FLUSH */
writel(RK_SETBITS(1 << 6), &crypto->ctrl); /* Assert HASH_FLUSH */
udelay(1); /* for 10+ cycles to */
write32(RK_CLRBITS(1 << 6), &crypto->ctrl); /* clear out old hash */
writel(RK_CLRBITS(1 << 6), &crypto->ctrl); /* clear out old hash */
/* Enable DMA byte swapping for little-endian bus (Byteswap_??FIFO) */
write32(1 << 5 | 1 << 4 | 1 << 3, &crypto->conf);
writel(1 << 5 | 1 << 4 | 1 << 3, &crypto->conf);
write32(HRDMA_ERR | HRDMA_DONE, &crypto->intena); /* enable interrupt */
writel(HRDMA_ERR | HRDMA_DONE, &crypto->intena); /* enable interrupt */
write32(data_size, &crypto->hash_msg_len); /* program total size */
write32(1 << 3 | 0x2, &crypto->hash_ctrl); /* swap DOUT, SHA256 */
writel(data_size, &crypto->hash_msg_len); /* program total size */
writel(1 << 3 | 0x2, &crypto->hash_ctrl); /* swap DOUT, SHA256 */
printk(BIOS_DEBUG, "Initialized RK3288 HW crypto for %u byte SHA256\n",
data_size);
@ -101,12 +101,12 @@ int vb2ex_hwcrypto_digest_extend(const uint8_t *buf, uint32_t size)
{
uint32_t intsts;
write32(HRDMA_ERR | HRDMA_DONE, &crypto->intsts); /* clear interrupts */
writel(HRDMA_ERR | HRDMA_DONE, &crypto->intsts); /* clear interrupts */
/* NOTE: This assumes that the DMA is reading from uncached SRAM. */
write32((uint32_t)buf, &crypto->hrdmas);
write32(size / sizeof(uint32_t), &crypto->hrdmal);
write32(RK_SETBITS(1 << 3), &crypto->ctrl); /* Set HASH_START */
writel((uint32_t)buf, &crypto->hrdmas);
writel(size / sizeof(uint32_t), &crypto->hrdmal);
writel(RK_SETBITS(1 << 3), &crypto->ctrl); /* Set HASH_START */
do {
intsts = read32(&crypto->intsts);
if (intsts & HRDMA_ERR) {

View File

@ -41,7 +41,7 @@ void timer_monotonic_get(struct mono_time *mt)
void init_timer(void)
{
write32(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count0);
write32(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count1);
write32(1, &timer7_ptr->timer_ctrl_reg);
writel(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count0);
writel(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count1);
writel(1, &timer7_ptr->timer_ctrl_reg);
}

View File

@ -189,8 +189,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
* release pad retention and retain the memory content until the
* initialization is complete.
*/
write32(PAD_RETENTION_DRAM_COREBLK_VAL,
&exynos_power->padret_dram_cblk_opt);
writel(PAD_RETENTION_DRAM_COREBLK_VAL,
&exynos_power->padret_dram_cblk_opt);
do {
ret = read32(&exynos_power->padret_dram_status);
} while (ret != 0x1);

View File

@ -55,7 +55,7 @@ static inline unsigned long fradl(void *v) {
#define lread32(a) fradl((void *)(a))
#else
#define lwrite32(a,b) write32((unsigned long)(a), (void *)(b))
#define lwrite32(a,b) writel((unsigned long)(a), (void *)(b))
#define lread32(a) read32((void *)(a))
#endif

View File

@ -430,7 +430,7 @@ static int hsi2c_senddata(struct hsi2c_regs *regs, const uint8_t *data, int len)
{
while (!hsi2c_check_transfer(regs) && len) {
if (!(read32(&regs->usi_fifo_stat) & Hsi2cTxFifoFull)) {
write32(*data++, &regs->usi_txdata);
writel(*data++, &regs->usi_txdata);
len--;
}
}
@ -452,7 +452,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
{
const uint32_t usi_ctl = Hsi2cFuncModeI2c | Hsi2cMaster;
write32(HSI2C_SLV_ADDR_MAS(seg->chip), &regs->i2c_addr);
writel(HSI2C_SLV_ADDR_MAS(seg->chip), &regs->i2c_addr);
/*
* We really only want to stop after this transaction (I think) if the
@ -465,14 +465,14 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
seg->len | Hsi2cMasterRun | Hsi2cStopAfterTrans;
if (seg->read) {
write32(usi_ctl | Hsi2cRxchon, &regs->usi_ctl);
write32(autoconf | Hsi2cReadWrite, &regs->i2c_auto_conf);
writel(usi_ctl | Hsi2cRxchon, &regs->usi_ctl);
writel(autoconf | Hsi2cReadWrite, &regs->i2c_auto_conf);
if (hsi2c_recvdata(regs, seg->buf, seg->len))
return -1;
} else {
write32(usi_ctl | Hsi2cTxchon, &regs->usi_ctl);
write32(autoconf, &regs->i2c_auto_conf);
writel(usi_ctl | Hsi2cTxchon, &regs->usi_ctl);
writel(autoconf, &regs->i2c_auto_conf);
if (hsi2c_senddata(regs, seg->buf, seg->len))
return -1;