mb/google/volteer/variant/lindar: Update gpio and devicetree settings
Based on schematic and gpio table of lindar, generate gpio and overridetree.cb settings for lindar. BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: Ib869eef08433dab367edd46b3dc577190b6673d8 Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
This commit is contained in:
Julia Tsai
Patrick Georgi
parent
12016969c5
commit
d230dd27d8
|
|
@ -0,0 +1,6 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
|
||||
bootblock-y += gpio.c
|
||||
|
||||
ramstage-y += gpio.c
|
||||
|
|
@ -0,0 +1,151 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <commonlib/helpers.h>
|
||||
|
||||
/* Pad configuration in ramstage */
|
||||
static const struct pad_config override_gpio_table[] = {
|
||||
/* A7 : I2S2_SCLK ==> EN_PP3300_TRACKPAD */
|
||||
PAD_CFG_GPO(GPP_A7, 1, DEEP),
|
||||
/* A8 : I2S2_SFRM ==> EN_PP3300_TOUCHSCREEN */
|
||||
PAD_CFG_GPO(GPP_A8, 0, DEEP),
|
||||
/* A10 : I2S2_RXD ==> EN_SPKR_PA */
|
||||
PAD_CFG_GPO(GPP_A10, 1, DEEP),
|
||||
/* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */
|
||||
PAD_CFG_GPO(GPP_A13, 1, DEEP),
|
||||
/* A16 : USB_OC3# ==> USB_C0_OC_ODL */
|
||||
PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
|
||||
/* A19 : DDSP_HPD1 ==> USB_C0_DP_HPD */
|
||||
PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1),
|
||||
/* A20 : DDSP_HPD2 ==> USB_C1_DP_HPD */
|
||||
PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1),
|
||||
/* A22 : DDPC_CTRLDATA ==> EN_PP3300_SSD */
|
||||
PAD_CFG_GPO(GPP_A22, 1, DEEP),
|
||||
/* A23 : I2S1_SCLK ==> I2S1_SPKR_SCLK */
|
||||
PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1),
|
||||
|
||||
/* B2 : VRALERT# ==> NOT USED */
|
||||
PAD_NC(GPP_B2, NONE),
|
||||
/* B9 : I2C5_SDA ==> PCH_I2C5_TRACKPAD_SDA */
|
||||
PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
|
||||
/* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */
|
||||
PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
|
||||
/* B22 : GSPI1_MOSI ==> NOT USED */
|
||||
PAD_NC(GPP_B22, NONE),
|
||||
|
||||
/* C0 : SMBCLK ==> EN_PP3300_WLAN */
|
||||
PAD_CFG_GPO(GPP_C0, 1, DEEP),
|
||||
/* C10 : UART0_RTS# ==> USI_RST_L */
|
||||
PAD_CFG_GPO(GPP_C10, 0, DEEP),
|
||||
/* C16 : I2C0_SDA ==> PCH_I2C0_1V8_AUDIO_SDA */
|
||||
PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
|
||||
/* C17 : I2C0_SCL ==> PCH_I2C0_1V8_AUDIO_SCL */
|
||||
PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
|
||||
/* C18 : I2C1_SDA ==> PCH_I2C1_TOUCH_USI_SDA */
|
||||
PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
|
||||
/* C19 : I2C1_SCL ==> PCH_I2C1_TOUCH_USI_SCL */
|
||||
PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
|
||||
|
||||
/* D6 : SRCCLKREQ1# ==> WLAN_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1),
|
||||
/* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1),
|
||||
/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
|
||||
PAD_CFG_GPO(GPP_D16, 1, DEEP),
|
||||
/* D17 : ISH_GP4 ==> EN_CVF_PWR */
|
||||
PAD_CFG_GPO(GPP_D17, 1, DEEP),
|
||||
|
||||
/* E2 : SPI1_IO3 ==> WLAN_PCIE_WAKE_ODL */
|
||||
PAD_CFG_GPI(GPP_E2, NONE, DEEP),
|
||||
/* E3 : CPU_GP0 ==> USI_REPORT_EN */
|
||||
PAD_CFG_GPO(GPP_E3, 0, DEEP),
|
||||
/* E4 : SATA_DEVSLP0 ==> M2_SSD_PE_WAKE_ODL */
|
||||
PAD_CFG_GPI(GPP_E4, NONE, DEEP),
|
||||
/* E7 : CPU_GP1 ==> USI_INT */
|
||||
PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE),
|
||||
/* E11 : SPI1_CLK ==> SD_PE_WAKE_ODL */
|
||||
PAD_CFG_GPI(GPP_E11, NONE, DEEP),
|
||||
/* E15 : ISH_GP6 ==> TRACKPAD_INT_ODL */
|
||||
PAD_CFG_GPI_IRQ_WAKE(GPP_E15, NONE, DEEP, LEVEL, INVERT),
|
||||
|
||||
/* F8 : I2S_MCLK2_INOUT ==> HP_INT_L */
|
||||
PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, EDGE_BOTH),
|
||||
/* F13 : GSXDOUT ==> WiFi_DISABLE_L */
|
||||
PAD_CFG_GPO(GPP_F13, 1, DEEP),
|
||||
/* F19 : SRCCLKREQ6# ==> WLAN_INT_L */
|
||||
PAD_CFG_GPI_SCI_LOW(GPP_F19, NONE, DEEP, EDGE_SINGLE),
|
||||
|
||||
/* H3 : SX_EXIT_HOLDOFF# ==> SD_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H3, 1, DEEP),
|
||||
/* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H11, 1, DEEP),
|
||||
/* H12 : M2_SKT2_CFG0 ==> SPKR_INT_R */
|
||||
PAD_CFG_GPI(GPP_H12, NONE, DEEP),
|
||||
/* H13 : M2_SKT2_CFG1 # ==> SPKR_INT_L */
|
||||
PAD_CFG_GPI(GPP_H13, NONE, DEEP),
|
||||
|
||||
/* R0 : HDA_BCLK ==> I2S0_HP_SCLK */
|
||||
PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),
|
||||
/* R1 : HDA_SYNC ==> I2S0_HP_SFRM */
|
||||
PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),
|
||||
/* R2 : HDA_SDO ==> I2S0_PCH_TX_HP_RX_STRAP */
|
||||
PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2),
|
||||
/* R3 : HDA_SDIO ==> I2S0_PCH_RX_HP_TX */
|
||||
PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),
|
||||
/* R5 : HDA_SDI1 ==> I2S1_PCH_RX_SPKR_TX */
|
||||
PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2),
|
||||
/* R6 : I2S1_TXD ==> I2S1_PCH_RX_SPKR_RX */
|
||||
PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2),
|
||||
/* R7 : I2S1_SFRM ==> I2S1_SPKR_SFRM */
|
||||
PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2),
|
||||
|
||||
/* S6 : SNDW3_CLK ==> DMIC_CLK0 */
|
||||
PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2),
|
||||
/* S7 : SNDW3_DATA ==> DMIC_DATA0 */
|
||||
PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2),
|
||||
|
||||
/* GPD9: SLP_WLAN# ==> SLP_WLAN_L_CAP_SITE */
|
||||
PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
|
||||
};
|
||||
|
||||
/* Early pad configuration in bootblock */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */
|
||||
PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
|
||||
/* A17 : DDSP_HPDC ==> MEM_CH_SEL */
|
||||
PAD_CFG_GPI(GPP_A17, NONE, DEEP),
|
||||
/* A22 : DDPC_CTRLDATA ==> EN_PP3300_SSD */
|
||||
PAD_CFG_GPO(GPP_A22, 1, DEEP),
|
||||
|
||||
/* B11 : PMCALERT# ==> PCH_WP_OD */
|
||||
PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
|
||||
/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
|
||||
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
|
||||
/* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */
|
||||
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
|
||||
/* B17 : GSPI0_MISO ==> PCH_GSPIO_H1_TPM_MISO */
|
||||
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
|
||||
/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
|
||||
PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
|
||||
|
||||
/* C0 : SMBCLK ==> EN_PP3300_WLAN */
|
||||
PAD_CFG_GPO(GPP_C0, 1, DEEP),
|
||||
/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
|
||||
|
||||
/* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H11, 1, DEEP),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_override_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(override_gpio_table);
|
||||
return override_gpio_table;
|
||||
}
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
||||
|
|
@ -1,6 +1,83 @@
|
|||
chip soc/intel/tigerlake
|
||||
# USB Port Config
|
||||
register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0
|
||||
register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C1
|
||||
register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera
|
||||
register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C0
|
||||
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth
|
||||
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port A0
|
||||
register "usb3_ports[1]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
|
||||
register "SaGv" = "SaGv_Disabled"
|
||||
# I2C Port Config
|
||||
register "SerialIoI2cMode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoPci,
|
||||
}"
|
||||
device domain 0 on
|
||||
device pci 07.0 off end # TBT_PCIe0 0x9A23
|
||||
device pci 07.1 off end # TBT_PCIe1 0x9A25
|
||||
device pci 07.2 off end # TBT_PCIe2 0x9A27
|
||||
device pci 07.3 off end # TBT_PCIe3 0x9A29
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on end
|
||||
end
|
||||
end # I2C0
|
||||
device pci 15.1 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""GDIX0000""
|
||||
register "generic.desc" = ""Goodix Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
|
||||
# Parameter T3 >= 10ms
|
||||
register "generic.reset_delay_ms" = "120"
|
||||
# Parameter T2 >= 1ms
|
||||
register "generic.reset_off_delay_ms" = "3"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
|
||||
# Parameter T1 >= 10ms
|
||||
register "generic.enable_delay_ms" = "12"
|
||||
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)"
|
||||
# Parameter T4 >= 1ms
|
||||
register "generic.stop_off_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 14 on end
|
||||
end
|
||||
end # I2C1
|
||||
device pci 15.2 off end # I2C2 0xA0EA
|
||||
device pci 19.1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
|
||||
register "wake" = "GPE0_DW2_15"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C5 0xA0C6
|
||||
end
|
||||
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue