asrock/e350m1: Match super-io GPIO configuration with vendor

Disables mouse ps2 data/clock signals, not connected in hardware.
Purpose of other GPIOs is not really known, but match them
with superiotool dump taken from vendor bios.

Change-Id: I7b549fbd7dd3fa4cbd507d76882b60bc324a4bd0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12214
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

src/mainboard/asrock/e350m1/devicetree.cb

@@ -72,17 +72,34 @@ chip northbridge/amd/agesa/family14/root_complex
 								io 0x60 = 0x100
 								irq 0x70 = 0
 							end
-							device pnp 2e.7 off end #  GIPO689
+							device pnp 2e.107 off end #  GPIO6
+							device pnp 2e.207 off end #  GPIO7
+							device pnp 2e.307 on #  GPIO8
+								irq 0x23 = 0x28
+								irq 0xe4 = 0xbf
+								irq 0xed = 0x27
+							end
+							device pnp 2e.407 off end #  GPIO9
 							device pnp 2e.8 off end #  WDT
-							device pnp 2e.9 off end #  GPIO235
+							device pnp 2e.009 on #  GPIO2
-							device pnp 2e.a on end #  ACPI
+								irq 0x2a = 0x42
+								irq 0xe0 = 0xe3
+							end
+							device pnp 2e.109 off end #  GPIO3
+							device pnp 2e.209 off end #  GPIO4
+							device pnp 2e.309 off end #  GPIO5
+							device pnp 2e.a on #  ACPI
+								irq 0xe7 = 0x10
+							end
 							device pnp 2e.b on #  HW Monitor
 								io 0x60 = 0x290
 								io 0x62 = 0x0000 #  SB-TSI currently not implemented
 								irq 0x70 = 5
 							end
 							device pnp 2e.c off end #  PECI
-							device pnp 2e.d off end #  SUSLED
+							device pnp 2e.d on #  SUSLED
+								irq 0xec = 0x90
+							end
 							device pnp 2e.e off #  CIRWKUP
 								io 0x60 = 0x0000
 								irq 0x70 = 0