usbdebug: Allow an USB hub on the debug dongle

Some development kits with USB 2.0 HS OTG have an USB hub instead
of being directly connected to the USB host/device controller.

Send the necessary initialisation sequence, using HUB CLASS requests
of PORT_POWER and PORT_RESET to enable a pre-selected port number
where a device supporting debug descriptor is located.

This also adds the Kconfig option for BeagleBone.

Change-Id: I7a5d0ba0962a9ca06bf3196232ed4a03bdfb2b06
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3925
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This commit is contained in:
Kyösti Mälkki 2013-08-23 23:33:16 +03:00
parent 8f485dee0d
commit d2dac0a7d6
2 changed files with 128 additions and 2 deletions

View File

@ -173,10 +173,11 @@ config USBDEBUG
If unsure, say N.
if USBDEBUG
config USBDEBUG_HCD_INDEX
int "Index for EHCI controller to use with usbdebug"
default 0
depends on USBDEBUG
help
Some boards have multiple EHCI controllers with possibly only
one having the Debug Port capability on an external USB port.
@ -188,7 +189,6 @@ config USBDEBUG_HCD_INDEX
config USBDEBUG_DEFAULT_PORT
int "Default USB port to use as Debug Port"
default 0
depends on USBDEBUG
help
Selects which physical USB port usbdebug dongle is connected to.
Setting of 0 means to scan possible ports starting from 1.
@ -202,6 +202,27 @@ config USBDEBUG_DEFAULT_PORT
your mainboard) is highly board-specific, and you'll likely
have to find out by trial-and-error.
choice
prompt "Type of dongle"
default USBDEBUG_DONGLE_STD
config USBDEBUG_DONGLE_STD
bool "Net20DC or compatible"
config USBDEBUG_DONGLE_BEAGLEBONE
bool "BeagleBone"
help
Use this to configure the USB hub on BeagleBone board.
endchoice
config USBDEBUG_OPTIONAL_HUB_PORT
int
default 2 if USBDEBUG_DONGLE_BEAGLEBONE
default 0
endif # USBDEBUG
# TODO: Deps?
# TODO: Improve description.
config ONBOARD_VGA_IS_PRIMARY

View File

@ -483,6 +483,102 @@ static int ehci_wait_for_port(struct ehci_regs *ehci_regs, int port)
return -1; //-ENOTCONN;
}
#define USB_HUB_PORT_CONNECTION 0
#define USB_HUB_PORT_ENABLED 1
#define USB_HUB_PORT_RESET 4
#define USB_HUB_PORT_POWER 8
#define USB_HUB_C_PORT_CONNECTION 16
#define USB_HUB_C_PORT_RESET 20
#if CONFIG_USBDEBUG_OPTIONAL_HUB_PORT
static int hub_port_status(const char * buf, int feature)
{
return !!(buf[feature>>3] & (1<<(feature&0x7)));
}
static int dbgp_hub_enable(struct ehci_dbg_port *ehci_debug, unsigned int port)
{
const u8 hub_addr = USB_DEBUG_DEVNUM-1;
char status[8];
int ret, loop;
/* Move hub to address 126. */
ret = dbgp_control_msg(ehci_debug, 0,
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_ADDRESS, hub_addr, 0, NULL, 0);
if (ret < 0)
goto err;
/* Enter configured state on hub. */
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0);
if (ret < 0)
goto err;
/* Set PORT_POWER, poll for PORT_CONNECTION. */
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
USB_REQ_SET_FEATURE, USB_HUB_PORT_POWER, port, NULL, 0);
if (ret < 0)
goto err;
loop = 100;
do {
dbgp_mdelay(10);
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER,
USB_REQ_GET_STATUS, 0, port, status, 4);
if (ret < 0)
goto err;
if (hub_port_status(status, USB_HUB_PORT_CONNECTION))
break;
} while (--loop);
if (! loop)
goto err;
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
USB_REQ_CLEAR_FEATURE, USB_HUB_C_PORT_CONNECTION, port, NULL, 0);
if (ret < 0)
goto err;
/* Set PORT_RESET, poll for C_PORT_RESET. */
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
USB_REQ_SET_FEATURE, USB_HUB_PORT_RESET, port, NULL, 0);
if (ret < 0)
goto err;
loop = 100;
do {
dbgp_mdelay(10);
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER,
USB_REQ_GET_STATUS, 0, port, status, 4);
if (ret < 0)
goto err;
if (hub_port_status(status, USB_HUB_C_PORT_RESET))
break;
} while (--loop);
if (! loop)
goto err;
ret = dbgp_control_msg(ehci_debug, hub_addr,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
USB_REQ_CLEAR_FEATURE, USB_HUB_C_PORT_RESET, port, NULL, 0);
if (ret < 0)
goto err;
if (hub_port_status(status, USB_HUB_PORT_ENABLED))
return 0;
err:
return -1;
}
#endif /* CONFIG_USBDEBUG_OPTIONAL_HUB_PORT */
#if defined(__PRE_RAM__) || !CONFIG_EARLY_CONSOLE
static void enable_usbdebug(void)
{
@ -640,6 +736,15 @@ try_next_port:
dbgp_mdelay(100);
#if CONFIG_USBDEBUG_OPTIONAL_HUB_PORT
ret = dbgp_hub_enable(ehci_debug, CONFIG_USBDEBUG_OPTIONAL_HUB_PORT);
if (ret < 0) {
dprintk(BIOS_INFO, "Could not enable USB hub on debug port.\n");
ret = -6;
goto err;
}
#endif
/* Find the debug device and make it device number 127 */
devnum = 0;
debug_dev_retry: