asrock/imb-a180: Remove commented oem_fan_control()
Change-Id: Ibfbb2ff2d9776fe91a8a09561d9c32eb49a56db6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This commit is contained in:
Kyösti Mälkki
parent
05b2f69cd0
commit
d3af7d7fcc
|
|
@ -110,184 +110,6 @@ static const CODEC_TBL_LIST CodecTableList[] =
|
||||||
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
|
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
|
||||||
};
|
};
|
||||||
|
|
||||||
#define FAN_INPUT_INTERNAL_DIODE 0
|
|
||||||
#define FAN_INPUT_TEMP0 1
|
|
||||||
#define FAN_INPUT_TEMP1 2
|
|
||||||
#define FAN_INPUT_TEMP2 3
|
|
||||||
#define FAN_INPUT_TEMP3 4
|
|
||||||
#define FAN_INPUT_TEMP0_FILTER 5
|
|
||||||
#define FAN_INPUT_ZERO 6
|
|
||||||
#define FAN_INPUT_DISABLED 7
|
|
||||||
|
|
||||||
#define FAN_AUTOMODE (1 << 0)
|
|
||||||
#define FAN_LINEARMODE (1 << 1)
|
|
||||||
#define FAN_STEPMODE ~(1 << 1)
|
|
||||||
#define FAN_POLARITY_HIGH (1 << 2)
|
|
||||||
#define FAN_POLARITY_LOW ~(1 << 2)
|
|
||||||
|
|
||||||
/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
|
|
||||||
#define FREQ_28KHZ 0x0
|
|
||||||
#define FREQ_25KHZ 0x1
|
|
||||||
#define FREQ_23KHZ 0x2
|
|
||||||
#define FREQ_21KHZ 0x3
|
|
||||||
#define FREQ_29KHZ 0x4
|
|
||||||
#define FREQ_18KHZ 0x5
|
|
||||||
#define FREQ_100HZ 0xF7
|
|
||||||
#define FREQ_87HZ 0xF8
|
|
||||||
#define FREQ_58HZ 0xF9
|
|
||||||
#define FREQ_44HZ 0xFA
|
|
||||||
#define FREQ_35HZ 0xFB
|
|
||||||
#define FREQ_29HZ 0xFC
|
|
||||||
#define FREQ_22HZ 0xFD
|
|
||||||
#define FREQ_14HZ 0xFE
|
|
||||||
#define FREQ_11HZ 0xFF
|
|
||||||
|
|
||||||
/* imb_a180 Hardware Monitor Fan Control
|
|
||||||
* Hardware limitation:
|
|
||||||
* HWM failed to read the input temperture vi I2C,
|
|
||||||
* if other software switch the I2C switch by mistake or intention.
|
|
||||||
* We recommend to using IMC to control Fans, instead of HWM.
|
|
||||||
*/
|
|
||||||
#if 0
|
|
||||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
|
||||||
{
|
|
||||||
FCH_HWM_FAN_CTR oem_factl[5] = {
|
|
||||||
/* temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
|
|
||||||
/* imb_a180 FanOUT0 Fan header J32 */
|
|
||||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
|
||||||
/* imb_a180 FanOUT1 Fan header J31*/
|
|
||||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
|
||||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
|
||||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
|
||||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
|
||||||
};
|
|
||||||
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
|
|
||||||
|
|
||||||
/* Enable IMC fan control. the recommand way */
|
|
||||||
if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
|
|
||||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
|
||||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
|
||||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
|
|
||||||
|
|
||||||
FchParams->Imc.ImcEnable = TRUE;
|
|
||||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
|
||||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
|
||||||
|
|
||||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
|
||||||
|
|
||||||
/* Thermal Zone Parameter */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
|
|
||||||
|
|
||||||
/* IMC Fan Policy temperature thresholds */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
|
||||||
|
|
||||||
/* IMC Fan Policy PWM Settings */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
|
|
||||||
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
|
||||||
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
|
||||||
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
|
||||||
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
|
||||||
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
|
||||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
|
||||||
|
|
||||||
/* IMC Function */
|
|
||||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
|
|
||||||
|
|
||||||
/* NOTE:
|
|
||||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
|
|
||||||
* AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
|
|
||||||
* so we remove it from AGESA code. Please Seee FchInitLateHwm.
|
|
||||||
*/
|
|
||||||
} else {
|
|
||||||
/* HWM fan control, the way not recommand */
|
|
||||||
FchParams->Imc.ImcEnable = FALSE;
|
|
||||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
|
||||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
|
|
||||||
}
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
|
void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
|
||||||
{
|
{
|
||||||
}
|
}
|
||||||
|
|
@ -296,7 +118,4 @@ void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
|
||||||
{
|
{
|
||||||
/* Azalia Controller OEM Cqodec Table Pointer */
|
/* Azalia Controller OEM Cqodec Table Pointer */
|
||||||
FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList;
|
FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList;
|
||||||
|
|
||||||
/* Fan Control */
|
|
||||||
//oem_fan_control(FchParams_env);
|
|
||||||
}
|
}
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue