added sizeram and init routines

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1286 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Greg Watson 2003-11-15 15:26:02 +00:00
parent 8fc392b427
commit d57923c870
1 changed files with 252 additions and 7 deletions

View File

@ -23,28 +23,273 @@
#include <printk.h>
#include <arch/io.h>
#include <arch/pciconf.h>
#include <timer.h>
#include <clock.h>
#include <mem.h>
#include "i2c.h"
#include "mpc107.h"
#include <timer.h>
#define NUM_DIMMS 1
#define NUM_BANKS 2
void mpc107_init(void);
void
sdram_init(void)
{
sdram_dimm_info sdram_dimms[NUM_DIMMS];
sdram_bank_info sdram_banks[NUM_BANKS];
struct sdram_dimm_info dimms[NUM_DIMMS];
struct sdram_bank_info banks[NUM_BANKS];
hostbridge_probe_dimms(NUM_DIMMS, sdram_dimms, sdram_banks);
(void)hostbridge_config_memory(NUM_BANKS, sdram_banks, 2);
mpc107_init();
mpc107_probe_dimms(NUM_DIMMS, dimms, banks);
(void)mpc107_config_memory(NUM_BANKS, banks, 2);
}
struct mem_range *
sizeram(void)
{
int i;
struct sdram_dimm_info dimms[NUM_DIMMS];
struct sdram_bank_info banks[NUM_BANKS];
static struct mem_range meminfo;
meminfo.basek = 0;
meminfo.sizek = 0;
mpc107_probe_dimms(NUM_DIMMS, dimms, banks);
for (i = 0; i < NUM_BANKS; i++)
meminfo.sizek += banks[i].size;
meminfo.sizek >>= 10;
return &meminfo;
}
void
mpc107_init(void)
{
uint16_t reg16;
uint32_t reg32;
/*
* PCI Cmd
*/
pci_ppc_write_config16(0, 0, 0x04, 0x06);
/*
* PCI Stat
*/
reg16 = pci_ppc_read_config16(0, 0, 0x06);
reg16 |= 0xffff;
pci_ppc_write_config16(0, 0, 0x06, reg16);
/*
* PICR1
* 0x00400000 burst read wait states = 1
* 0x00040000 processor type = 603/750
* 0x00002000 enable LocalBusSlave
* 0x00001000 enable Flash write
* 0x00000800 enable MCP* assertion
* 0x00000400 enable TEA* assertion
* 0x00000200 enable data bus parking
* 0x00000040 enable PCI store gathering
* 0x00000010 enable loop-snoop
* 0x00000008 enable address bus parking
* 0x00000004 enable speculative PCI reads
*/
reg32 = pci_ppc_read_config32(0, 0, 0xa8);
/*
* Preserve RCS0/Addr Map bits
*/
reg32 &= 0x11;
reg32 |= 0xff041a18;
pci_ppc_write_config32(0, 0, 0xa8, reg32);
/*
* PICR2
* 0x20000000 no Serialize Config cycles
* 0x08000000 No PCI Snoop cycles
* 0x04000000 FF0 is Local ROM
* 0x02000000 Flash write lockout
* 0x00000000 snoop wt states = 0
* 0x00040000 snoop wt states = 1
* 0x00080000 snoop wt states = 2
* 0x000c0000 snoop wt states = 3
* 0x00000000 addr phase wt states = 0
* 0x00000004 addr phase wt states = 1
* 0x00000008 addr phase wt states = 2
* 0x0000000c addr phase wt states = 3
*/
pci_ppc_write_config32(0, 0, 0xac, 0x04040004);
/*
* EUMBBAR
*/
pci_ppc_write_config32(0, 0, 0x78, 0xfc000000);
/*
* MCCR1 - Set MEMGO bit later!
* 0x75800000 Safe local ROM = 10+3 clocks
* 0x73800000 Fast local ROM = 7+3 clocks
* 0x00100000 Burst ROM/Flash enable
* 0x00040000 Self-refresh enable
* 0x00020000 EDO/FP enable (else SDRAM)
* 0x00010000 Parity check
* 0x0000FFFF 16Mbit/2 bank SDRAM
* 0x00005555 64Mbit/2 bank SDRAM
* 0x00000000 64Mbit/4 bank SDRAM
*/
reg32 = pci_ppc_read_config32(0, 0, 0xf0);
reg32 &= 0x00080000; /* Preserve MEMGO bit in case we're in RAM */
reg32 |= 0x75800000;
pci_ppc_write_config32(0, 0, 0xf0, reg32);
/*
* MCCR2
* 0x40000000 TS_WAIT_TIMER = 3 clocks
* 0x04000000 ASRISE = 2 clocks
* 0x00400000 ASFALL = 2 clocks
* 0x00100000 SDRAM parity (else ECC)
* 0x00080000 SDRAM inline writes
* 0x00040000 SDRAM inline reads
* 0x00020000 ECC enable
* 0x00010000 EDO (else FP)
* 0x000006b8 Refresh 33MHz bus
* 0x0000035c Refresh 66MHz bus
* 0x0000023c Refresh 100MHz bus
* 0x000001ac Refresh 133MHz bus
* 0x00000002 Reserve a page
* 0x00000001 RWM parity
*/
pci_ppc_write_config32(0, 0, 0xf4, 0x0440023c);
/*
* MCCR3
* 0x70000000 BSTOPRE_M = 7
* 0x08000000 REFREC = 8 clocks
* 0x00400000 RDLAT = 4 clocks
* 0x00300000 RDLAT = 3 clocks
*/
pci_ppc_write_config32(0, 0, 0xf8, 0x78400000);
/*
* MCCR4
* 0x30000000 PRETOACT = 3 clocks
* 0x05000000 ACTOPRE = 5 clocks
* 0x00800000 Enable 8-beat burst (32-bit bus)
* 0x00400000 Enable Inline ECC/Parity
* 0x00200000 Enable Extended ROM (RCS2/RCS3)
* 0x00100000 Registered buffers
* 0x00000000 BSTOPRE_U = 0
* 0x00020000 Change RCS1 to 8-bit mode
* 0x00008000 Registered DIMMs
* 0x00003000 CAS Latencey (CL=3)
* 0x00002000 CAS Latencey (CL=2)
* 0x00000200 Sequential wrap/4-beat burst
* 0x00000030 Reserve a page
* 0x00000009 RWM parity
*/
pci_ppc_write_config32(0, 0, 0xfc, 0x35323239);
/*
* MSAR1/MSAR2/MESAR1/MESAR2
*/
pci_ppc_write_config32(0, 0, 0x80, 0x60402000);
pci_ppc_write_config32(0, 0, 0x84, 0xe0c0a080);
pci_ppc_write_config32(0, 0, 0x88, 0x00000000);
pci_ppc_write_config32(0, 0, 0x8c, 0x00000000);
/*
* MEAR1/MEAR2/MEEAR1/MEEAR2
*/
pci_ppc_write_config32(0, 0, 0x90, 0x7f5f3f1f);
pci_ppc_write_config32(0, 0, 0x94, 0xffdfbf9f);
pci_ppc_write_config32(0, 0, 0x98, 0x00000000);
pci_ppc_write_config32(0, 0, 0x9c, 0x00000000);
/*
* ODCR
* 0x80 PCI I/O 50 ohms
* 0x40 CPU I/O 50 ohms
* 0x30 Mem I/O 8 ohms
* 0x20 Mem I/O 13 ohms
* 0x10 Mem I/O 20 ohms
* 0x00 Mem I/O 40 ohms
* 0x0c PCIClk 8 ohms
* 0x08 PCIClk 13 ohms
* 0x04 PCIClk 20 ohms
* 0x00 PCIClk 40 ohms
* 0x03 MemClk 8 ohms
* 0x02 MemClk 13.3 ohms
* 0x01 MemClk 20 ohms
* 0x00 MemClk 40 ohms
*/
pci_ppc_write_config8(0, 0, 0x73, 0xc0);
/*
* CDCR
* 0x8000 PCI_SYNC_OUT disabled
* 0x7c00 PCI_CLK disabled
* 0x0300 CPU_CLK 8 ohms
* 0x0200 CPU_CLK 13 ohms
* 0x0100 CPU_CLK 20 ohms
* 0x0000 CPU_CLK 40 ohms
* 0x0080 SDRAM_SYNC_OUT disabled
* 0x0078 SDRAM_CLK disabled
* 0x0004 CPU_CLK0 disabled
* 0x0002 CPU_CLK1 disabled
* 0x0001 CPU_CLK2 disabled
*/
pci_ppc_write_config16(0, 0, 0x74, 0xfc01);
/*
* MDCR
* 0x80 MCP 1=open-drain, 0=output
* 0x40 SRESET 1=open-drain, 0=output
* 0x20 QACK 1=high-Z, 0=output
*/
pci_ppc_write_config8(0, 0, 0x76, 0x60);
/*
* MBEN
* 0x03 Enable banks 0 and 1
*/
pci_ppc_write_config8(0, 0, 0xa0, 0x03);
/*
* PGMAX
* 0x32 33MHz value w/ROMFAL=8
*/
pci_ppc_write_config8(0, 0, 0xa3, 0x32);
/*
* Wait 200us
*/
udelay(200);
/*
* Now set memgo bit in MCCR1
*/
reg32 = pci_ppc_read_config32(0, 0, 0xf0);
reg32 |= 0x00080000; /* MEMGO=1 */
pci_ppc_write_config32(0, 0, 0xf0, reg32);
/*
* Wait again
*/
udelay(10000);
}
/*
* Configure memory settings.
*/
unsigned long
hostbridge_config_memory(int no_banks, sdram_bank_info * bank, int for_real)
mpc107_config_memory(int no_banks, sdram_bank_info * bank, int for_real)
{
int i, j;
char ignore[8];
@ -421,7 +666,7 @@ i2c_fn mpc107_i2c_fn = {
* Find dimm information.
*/
void
hostbridge_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank)
mpc107_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank)
{
unsigned char data[256];
unsigned dimm;