GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mainboard: Update mainboards using the w83795 sensor device 

Update mainboards using the w83795 sensor device with sane default
values.  Note that in some cases the defaults may vary from the
defaults provided by the old driver, for example the default fan
speeds and control modes have changed as I do not have any information
on the correct sensor to fan mappings for these boards.

Change-Id: Id2ad6222d7a0f29483b022fa097d7d098c6b4122
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12124
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
This commit is contained in:
Timothy Pearson 2015-10-22 02:53:39 -05:00 committed by Peter Stuge
parent f7e0a1aaaa
commit d59dc4532b
3 changed files with 267 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

89
src/mainboard/supermicro/h8qgi/devicetree.cb
View File

@ -107,6 +107,95 @@ chip northbridge/amd/agesa/family15/root_complex
end
end #superio/winbond/w83627dhg
chip drivers/i2c/w83795
register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8
register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions
register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13
register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1
register "temp_dtse" = "0x03" # Enable DTS1 and DTS2
register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8
register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1)
register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2)
register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3)
register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4)
register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5)
register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6)
register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1
register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2
register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3
register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4
register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5
register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6
register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C
register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C
register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C
register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C
register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C
register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C
register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C
register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C
register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "fan1_nonstop" = "7" # Set Fan 1 minimum speed
register "fan2_nonstop" = "7" # Set Fan 2 minimum speed
register "fan3_nonstop" = "7" # Set Fan 3 minimum speed
register "fan4_nonstop" = "7" # Set Fan 4 minimum speed
register "fan5_nonstop" = "7" # Set Fan 5 minimum speed
register "fan6_nonstop" = "7" # Set Fan 6 minimum speed
register "fan7_nonstop" = "7" # Set Fan 7 minimum speed
register "fan8_nonstop" = "7" # Set Fan 8 minimum speed
register "default_speed" = "100" # All fans to full speed on power up
register "fan1_duty" = "100" # Fan 1 to full speed
register "fan2_duty" = "100" # Fan 2 to full speed
register "fan3_duty" = "100" # Fan 3 to full speed
register "fan4_duty" = "100" # Fan 4 to full speed
register "fan5_duty" = "100" # Fan 5 to full speed
register "fan6_duty" = "100" # Fan 6 to full speed
register "fan7_duty" = "100" # Fan 7 to full speed
register "fan8_duty" = "100" # Fan 8 to full speed
register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V
register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V
register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V
register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V
register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V
register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V
register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V
register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V
register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V
register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V
register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V
register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V
register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V
register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V
register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V
register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V
register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V
register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V
register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V
register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V
register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V
register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V
register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V
register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V
register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V
register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V
register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V
register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V
register "smbus_aux" = "0" # Device located on primary SMBUS
device pnp 5e on #hwm
end
end #drivers/i2c/w83795

89
src/mainboard/supermicro/h8scm/devicetree.cb
View File

@ -106,6 +106,95 @@ chip northbridge/amd/agesa/family15/root_complex
end
end #superio/winbond/w83627dhg
chip drivers/i2c/w83795
register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8
register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions
register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13
register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1
register "temp_dtse" = "0x03" # Enable DTS1 and DTS2
register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8
register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1)
register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2)
register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3)
register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4)
register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5)
register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6)
register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1
register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2
register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3
register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4
register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5
register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6
register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C
register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C
register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C
register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C
register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C
register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C
register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C
register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C
register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "fan1_nonstop" = "7" # Set Fan 1 minimum speed
register "fan2_nonstop" = "7" # Set Fan 2 minimum speed
register "fan3_nonstop" = "7" # Set Fan 3 minimum speed
register "fan4_nonstop" = "7" # Set Fan 4 minimum speed
register "fan5_nonstop" = "7" # Set Fan 5 minimum speed
register "fan6_nonstop" = "7" # Set Fan 6 minimum speed
register "fan7_nonstop" = "7" # Set Fan 7 minimum speed
register "fan8_nonstop" = "7" # Set Fan 8 minimum speed
register "default_speed" = "100" # All fans to full speed on power up
register "fan1_duty" = "100" # Fan 1 to full speed
register "fan2_duty" = "100" # Fan 2 to full speed
register "fan3_duty" = "100" # Fan 3 to full speed
register "fan4_duty" = "100" # Fan 4 to full speed
register "fan5_duty" = "100" # Fan 5 to full speed
register "fan6_duty" = "100" # Fan 6 to full speed
register "fan7_duty" = "100" # Fan 7 to full speed
register "fan8_duty" = "100" # Fan 8 to full speed
register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V
register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V
register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V
register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V
register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V
register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V
register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V
register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V
register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V
register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V
register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V
register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V
register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V
register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V
register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V
register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V
register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V
register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V
register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V
register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V
register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V
register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V
register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V
register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V
register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V
register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V
register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V
register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V
register "smbus_aux" = "0" # Device located on primary SMBUS
device pnp 5e on #hwm
end
end #drivers/i2c/w83795

89
src/mainboard/tyan/s8226/devicetree.cb
View File

@ -106,6 +106,95 @@ chip northbridge/amd/agesa/family15/root_complex
end
end #superio/winbond/w83627dhg
chip drivers/i2c/w83795
register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8
register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions
register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13
register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1
register "temp_dtse" = "0x03" # Enable DTS1 and DTS2
register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8
register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1)
register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2)
register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3)
register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4)
register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5)
register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6)
register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1
register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2
register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3
register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4
register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5
register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6
register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C
register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C
register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C
register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C
register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C
register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C
register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C
register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C
register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C
register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C
register "fan1_nonstop" = "7" # Set Fan 1 minimum speed
register "fan2_nonstop" = "7" # Set Fan 2 minimum speed
register "fan3_nonstop" = "7" # Set Fan 3 minimum speed
register "fan4_nonstop" = "7" # Set Fan 4 minimum speed
register "fan5_nonstop" = "7" # Set Fan 5 minimum speed
register "fan6_nonstop" = "7" # Set Fan 6 minimum speed
register "fan7_nonstop" = "7" # Set Fan 7 minimum speed
register "fan8_nonstop" = "7" # Set Fan 8 minimum speed
register "default_speed" = "100" # All fans to full speed on power up
register "fan1_duty" = "100" # Fan 1 to full speed
register "fan2_duty" = "100" # Fan 2 to full speed
register "fan3_duty" = "100" # Fan 3 to full speed
register "fan4_duty" = "100" # Fan 4 to full speed
register "fan5_duty" = "100" # Fan 5 to full speed
register "fan6_duty" = "100" # Fan 6 to full speed
register "fan7_duty" = "100" # Fan 7 to full speed
register "fan8_duty" = "100" # Fan 8 to full speed
register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V
register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V
register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V
register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V
register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V
register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V
register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V
register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V
register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V
register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V
register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V
register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V
register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V
register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V
register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V
register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V
register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V
register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V
register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V
register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V
register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V
register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V
register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V
register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V
register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V
register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V
register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V
register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V
register "smbus_aux" = "0" # Device located on primary SMBUS
device pnp 5e on #hwm
end
end #drivers/i2c/w83795