mb/google/dedede/var/shotzo: Enable ILITEK touchscreen
The current reset delay is not enough to make touchscreen IC ready, ILITEK feedback their requiremt is 400ms in spec T2. After changing the reset_delay_ms and check touchscreen works, ILITE also change the IRO to low level trigger. This CL is to reflect that. BUG=b:235929123 BRANCH=firmware-dedede-13606.B TEST=check touchscreen function work Change-Id: I126b2d74c1d7a1799e2f67a8ab01cba074447c06 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
This commit is contained in:
parent
0225591a2e
commit
d6bf000a0e
|
@ -115,10 +115,10 @@ chip soc/intel/jasperlake
|
||||||
chip drivers/i2c/hid
|
chip drivers/i2c/hid
|
||||||
register "generic.hid" = ""ILTK0001""
|
register "generic.hid" = ""ILTK0001""
|
||||||
register "generic.desc" = ""ILITEK Touchscreen""
|
register "generic.desc" = ""ILITEK Touchscreen""
|
||||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
|
||||||
register "generic.probed" = "1"
|
register "generic.probed" = "1"
|
||||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
|
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
|
||||||
register "generic.reset_delay_ms" = "20"
|
register "generic.reset_delay_ms" = "400"
|
||||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
||||||
register "generic.enable_delay_ms" = "12"
|
register "generic.enable_delay_ms" = "12"
|
||||||
register "generic.wake" = "GPE0_DW2_04"
|
register "generic.wake" = "GPE0_DW2_04"
|
||||||
|
|
Loading…
Reference in New Issue