mb/google/brya/var/gaelin: Configure devicetree settings
Override devicetree configuration based on the latest gaelin schematic. BUG=b:249000573, b:254375472 BRANCH=firmware-brya-14505.B TEST=FW_NAME=emerge-brask coreboot Change-Id: I3a741feec52cf73da8d6ec0b03cc93d6a4cba256 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This commit is contained in:
Raymond Chung
Felix Held
parent
2c351d8f34
commit
d999a25212
|
|
@ -1,7 +1,207 @@
|
|||
chip soc/intel/alderlake
|
||||
|
||||
register "usb2_ports[2]" = "USB2_PORT_EMPTY"
|
||||
register "usb2_ports[3]" = "USB2_PORT_EMPTY"
|
||||
|
||||
register "usb3_ports[2]" = "USB3_PORT_EMPTY"
|
||||
register "usb3_ports[3]" = "USB3_PORT_EMPTY"
|
||||
|
||||
register "tcss_ports[2]" = "TCSS_PORT_EMPTY"
|
||||
|
||||
register "serial_io_i2c_mode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
|
||||
}"
|
||||
|
||||
register "serial_io_gspi_mode" = "{
|
||||
[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
|
||||
}"
|
||||
|
||||
# Enable eDP in Port A
|
||||
register "ddi_portA_config" = "1"
|
||||
|
||||
register "ddi_ports_config" = "{
|
||||
[DDI_PORT_A] = DDI_ENABLE_HPD,
|
||||
[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
|
||||
}"
|
||||
|
||||
register "sagv" = "SaGv_Enabled"
|
||||
|
||||
device domain 0 on
|
||||
end
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | Audio |
|
||||
#| I2C1 | cr50 TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.early_init = 1,
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 600,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device ref pcie4_0 on
|
||||
# Enable CPU PCIE RP 1 using CLK 0
|
||||
register "cpu_pcie_rp[CPU_RP(1)]" = "{
|
||||
.clk_req = 0,
|
||||
.clk_src = 0,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
end
|
||||
device ref tcss_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref tcss_usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C1 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref tcss_usb3_port2 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref usb2_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C1 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref usb2_port2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A3 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(5, 1))"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A2 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(6, 1))"
|
||||
device ref usb2_port7 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A1 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, CENTER, ACPI_PLD_GROUP(4, 1))"
|
||||
device ref usb2_port8 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||
device ref usb2_port9 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port10 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A1 (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, CENTER, ACPI_PLD_GROUP(4, 1))"
|
||||
device ref usb3_port2 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp5 on
|
||||
# Enable PCIE 5 using clk 2
|
||||
register "pch_pcie_rp[PCH_RP(5)]" = "{
|
||||
.clk_src = 2,
|
||||
.clk_req = 2,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
chip soc/intel/common/block/pcie/rtd3
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H20)"
|
||||
register "srcclk_pin" = "2"
|
||||
device generic 0 on end
|
||||
end
|
||||
end #PCIE5 WLAN
|
||||
device ref pcie_rp7 on
|
||||
# Enable PCIE 7 using clk 6
|
||||
register "pch_pcie_rp[PCH_RP(7)]" = "{
|
||||
.clk_src = 6,
|
||||
.clk_req = 6,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
chip drivers/net
|
||||
register "customized_leds" = "0x0843"
|
||||
register "wake" = "GPE0_DW0_07" #GPP_A7
|
||||
register "device_index" = "0"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end #PCIE7 RTL8111K Ethernet NIC
|
||||
device ref pcie_rp8 off end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn0 as mux_conn[0]
|
||||
use conn1 as mux_conn[1]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port1 as usb2_port
|
||||
use tcss_usb3_port1 as usb3_port
|
||||
device generic 0 alias conn0 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port2 as usb2_port
|
||||
use tcss_usb3_port2 as usb3_port
|
||||
device generic 1 alias conn1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue