This patch adds support for the VIA VT8237S south bridge. The VT8237R programming remains unchanged (tested
on mine desktop) except of reverting the small change introduced by Bari (gpio/inta setup reg 0x5b). This should go for some board specific file. The change would broke at least mine board. But seems to be needed for jakllsch. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Bari Ari <bari@onelabs.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Rudolf Marek
parent
10d0a81ec1
commit
d9f29c8e5e
|
|
@ -1160,6 +1160,9 @@
|
||||||
#define PCI_DEVICE_ID_VIA_K8T890CE_BR 0xb188
|
#define PCI_DEVICE_ID_VIA_K8T890CE_BR 0xb188
|
||||||
#define PCI_DEVICE_ID_VIA_VT6420_SATA 0x3149
|
#define PCI_DEVICE_ID_VIA_VT6420_SATA 0x3149
|
||||||
#define PCI_DEVICE_ID_VIA_VT8237R_LPC 0x3227
|
#define PCI_DEVICE_ID_VIA_VT8237R_LPC 0x3227
|
||||||
|
#define PCI_DEVICE_ID_VIA_VT8237S_LPC 0x3372
|
||||||
|
#define PCI_DEVICE_ID_VIA_VT8237_SATA 0x5372
|
||||||
|
#define PCI_DEVICE_ID_VIA_VT8237_VLINK 0x287e
|
||||||
#define PCI_DEVICE_ID_VIA_CN700_AGP 0x0314
|
#define PCI_DEVICE_ID_VIA_CN700_AGP 0x0314
|
||||||
#define PCI_DEVICE_ID_VIA_CN700_ERR 0x1314
|
#define PCI_DEVICE_ID_VIA_CN700_ERR 0x1314
|
||||||
#define PCI_DEVICE_ID_VIA_CN700_HOST 0x2314
|
#define PCI_DEVICE_ID_VIA_CN700_HOST 0x2314
|
||||||
|
|
|
||||||
|
|
@ -20,6 +20,7 @@
|
||||||
config chip.h
|
config chip.h
|
||||||
|
|
||||||
driver vt8237r.o
|
driver vt8237r.o
|
||||||
|
driver vt8237_ctrl.o
|
||||||
driver vt8237r_ide.o
|
driver vt8237r_ide.o
|
||||||
driver vt8237r_lpc.o
|
driver vt8237r_lpc.o
|
||||||
driver vt8237r_sata.o
|
driver vt8237r_sata.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,186 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
* the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
|
||||||
|
/* We support here K8M890/K8T890 and VT8237/S/A PCI1/Vlink */
|
||||||
|
|
||||||
|
static void vt8237_cfg(struct device *dev)
|
||||||
|
{
|
||||||
|
u8 regm, regm2, regm3;
|
||||||
|
|
||||||
|
device_t devfun3;
|
||||||
|
|
||||||
|
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_K8T890CE_3, 0);
|
||||||
|
|
||||||
|
if (!devfun3)
|
||||||
|
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_K8M890CE_3, 0);
|
||||||
|
|
||||||
|
if (!devfun3)
|
||||||
|
die("Unknown NB");
|
||||||
|
|
||||||
|
/* CPU to PCI Flow Control 1 & 2, just fill in recommended */
|
||||||
|
pci_write_config8(dev, 0x70, 0xc2);
|
||||||
|
pci_write_config8(dev, 0x71, 0xc8);
|
||||||
|
|
||||||
|
/* PCI Control */
|
||||||
|
pci_write_config8(dev, 0x72, 0xee);
|
||||||
|
pci_write_config8(dev, 0x73, 0x01);
|
||||||
|
pci_write_config8(dev, 0x74, 0x3c);
|
||||||
|
pci_write_config8(dev, 0x75, 0x0f);
|
||||||
|
pci_write_config8(dev, 0x76, 0x50);
|
||||||
|
pci_write_config8(dev, 0x77, 0x48);
|
||||||
|
pci_write_config8(dev, 0x78, 0x01);
|
||||||
|
/* APIC on HT */
|
||||||
|
pci_write_config8(dev, 0x7c, 0x77); //maybe Enable LDT APIC Mode bit3 set to 1
|
||||||
|
|
||||||
|
/* WARNING: Need to copy some registers from NB (D0F3) to SB (D11F7). */
|
||||||
|
|
||||||
|
regm = pci_read_config8(devfun3, 0x88); /* Shadow mem CTRL */
|
||||||
|
pci_write_config8(dev, 0x57, regm);
|
||||||
|
|
||||||
|
regm = pci_read_config8(devfun3, 0x80); /* Shadow page C */
|
||||||
|
pci_write_config8(dev, 0x61, regm);
|
||||||
|
|
||||||
|
regm = pci_read_config8(devfun3, 0x81); /* Shadow page D */
|
||||||
|
pci_write_config8(dev, 0x62, regm);
|
||||||
|
|
||||||
|
/* Shadow page F + memhole copy */
|
||||||
|
regm = pci_read_config8(devfun3, 0x83);
|
||||||
|
pci_write_config8(dev, 0x63, regm);
|
||||||
|
|
||||||
|
regm3 = pci_read_config8(devfun3, 0x82);/* Shadow page E */
|
||||||
|
pci_write_config8(dev, 0x64, regm);
|
||||||
|
|
||||||
|
regm = pci_read_config8(devfun3, 0x86); /* SMM and APIC decoding */
|
||||||
|
pci_write_config8(dev, 0xe6, regm);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Example of setup: Setup the V-Link for VT8237R, 8X mode.
|
||||||
|
*
|
||||||
|
* For K8T890CF VIA recommends what is in VIA column, AW is award 8X:
|
||||||
|
*
|
||||||
|
* REG DEF AW VIA-8X VIA-4X
|
||||||
|
* -----------------------------
|
||||||
|
* NB V-Link Manual Driving Control strobe 0xb5 0x46 0x46 0x88 0x88
|
||||||
|
* NB V-Link Manual Driving Control - Data 0xb6 0x46 0x46 0x88 0x88
|
||||||
|
* NB V-Link Receiving Strobe Delay 0xb7 0x02 0x02 0x61 0x01
|
||||||
|
* NB V-Link Compensation Control bit4,0 (b5,b6) 0xb4 0x10 0x10 0x11 0x11
|
||||||
|
* SB V-Link Strobe Drive Control 0xb9 0x00 0xa5 0x98 0x98
|
||||||
|
* SB V-Link Data drive Control???? 0xba 0x00 0xbb 0x77 0x77
|
||||||
|
* SB V-Link Receive Strobe Delay???? 0xbb 0x04 0x11 0x11 0x11
|
||||||
|
* SB V-Link Compensation Control bit0 (use b9) 0xb8 0x00 0x01 0x01 0x01
|
||||||
|
* V-Link CKG Control 0xb0 0x05 0x05 0x06 0x03
|
||||||
|
* V-Link CKG Control 0xb1 0x05 0x05 0x01 0x03
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void vt8237s_vlink_init(struct device *dev)
|
||||||
|
{
|
||||||
|
u8 reg;
|
||||||
|
|
||||||
|
device_t devfun7;
|
||||||
|
|
||||||
|
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_K8T890CE_7, 0);
|
||||||
|
|
||||||
|
if (!devfun7)
|
||||||
|
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_K8M890CE_7, 0);
|
||||||
|
|
||||||
|
/* no pairing NB found */
|
||||||
|
if (!devfun7)
|
||||||
|
return;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This init code is valid only for the VT8237S! For different
|
||||||
|
* sounthbridges (e.g. VT8237A, VT8237S, VT8237R (without plus R)
|
||||||
|
* and VT8251) a different init code is required.
|
||||||
|
*/
|
||||||
|
|
||||||
|
pci_write_config8(devfun7, 0xb5, 0x66);
|
||||||
|
pci_write_config8(devfun7, 0xb6, 0x66);
|
||||||
|
pci_write_config8(devfun7, 0xb7, 0x65);
|
||||||
|
|
||||||
|
reg = pci_read_config8(devfun7, 0xb4);
|
||||||
|
reg |= 0x1;
|
||||||
|
pci_write_config8(devfun7, 0xb4, reg);
|
||||||
|
|
||||||
|
pci_write_config8(dev, 0xb9, 0x68);
|
||||||
|
pci_write_config8(dev, 0xba, 0x88);
|
||||||
|
pci_write_config8(dev, 0xbb, 0x89);
|
||||||
|
|
||||||
|
|
||||||
|
reg = pci_read_config8(dev, 0xbd);
|
||||||
|
reg |= 0x3;
|
||||||
|
pci_write_config8(dev, 0xbd, reg);
|
||||||
|
|
||||||
|
/* Program V-link 8X 8bit full duplex, parity disabled FIXME */
|
||||||
|
pci_write_config8(dev, 0x48, 0x13);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ctrl_enable(struct device *dev) {
|
||||||
|
|
||||||
|
/* enable the 0:13 and 0:13.1 */
|
||||||
|
/* FIXME */
|
||||||
|
pci_write_config8(dev, 0x4f, 0x43);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
extern void dump_south(device_t dev);
|
||||||
|
|
||||||
|
static void ctrl_init(struct device *dev) {
|
||||||
|
|
||||||
|
/* TODO: Fix some ordering issue fo V-link set Rx77[6] and PCI1_Rx4F[0]
|
||||||
|
should to 1 FIXME DO you need?*/
|
||||||
|
|
||||||
|
/* VT8237R specific configuration other SB are done in their own directories */
|
||||||
|
/* add A version */
|
||||||
|
device_t devsb = dev_find_device(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237S_LPC, 0);
|
||||||
|
if (devsb) {
|
||||||
|
/* FIXME: Skip v-link setup for now */
|
||||||
|
// vt8237s_vlink_init(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* configure PCI1 and copy mirror registers from D0F3 */
|
||||||
|
vt8237_cfg(dev);
|
||||||
|
dump_south(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct device_operations ctrl_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = ctrl_init,
|
||||||
|
.enable = ctrl_enable,
|
||||||
|
.ops_pci = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pci_driver northbridge_driver_t __pci_driver = {
|
||||||
|
.ops = &ctrl_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_VT8237_VLINK,
|
||||||
|
};
|
||||||
|
|
@ -20,6 +20,8 @@
|
||||||
#ifndef SOUTHBRIDGE_VIA_VT8237R_VT8237R_H
|
#ifndef SOUTHBRIDGE_VIA_VT8237R_VT8237R_H
|
||||||
#define SOUTHBRIDGE_VIA_VT8237R_VT8237R_H
|
#define SOUTHBRIDGE_VIA_VT8237R_VT8237R_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
/* Static resources for the VT8237R southbridge */
|
/* Static resources for the VT8237R southbridge */
|
||||||
|
|
||||||
#define VT8237R_APIC_ID 0x2
|
#define VT8237R_APIC_ID 0x2
|
||||||
|
|
@ -27,6 +29,7 @@
|
||||||
#define VT8237R_SMBUS_IO_BASE 0x400
|
#define VT8237R_SMBUS_IO_BASE 0x400
|
||||||
/* 0x0 disabled, 0x2 reserved, 0xf = IRQ15 */
|
/* 0x0 disabled, 0x2 reserved, 0xf = IRQ15 */
|
||||||
#define VT8237R_ACPI_IRQ 0x9
|
#define VT8237R_ACPI_IRQ 0x9
|
||||||
|
#define VT8237S_SPI_MEM_BASE 0xfed02000ULL
|
||||||
#define VT8237R_HPET_ADDR 0xfed00000ULL
|
#define VT8237R_HPET_ADDR 0xfed00000ULL
|
||||||
#define VT8237R_APIC_BASE 0xfec00000ULL
|
#define VT8237R_APIC_BASE 0xfec00000ULL
|
||||||
|
|
||||||
|
|
@ -68,4 +71,28 @@
|
||||||
|
|
||||||
#define SMBUS_DELAY() inb(0x80)
|
#define SMBUS_DELAY() inb(0x80)
|
||||||
|
|
||||||
|
struct vt8237_network_rom {
|
||||||
|
u8 mac_address[6];
|
||||||
|
u8 phy_addr;
|
||||||
|
u8 res1;
|
||||||
|
u16 sub_sid;
|
||||||
|
u16 sub_vid;
|
||||||
|
u16 pid;
|
||||||
|
u16 vid;
|
||||||
|
u8 pmcc;
|
||||||
|
u8 data_sel;
|
||||||
|
u8 pmu_data_reg;
|
||||||
|
u8 aux_curr;
|
||||||
|
u16 reserved;
|
||||||
|
u8 min_gnt;
|
||||||
|
u8 max_lat;
|
||||||
|
u8 bcr0;
|
||||||
|
u8 bcr1;
|
||||||
|
u8 cfg_a;
|
||||||
|
u8 cfg_b;
|
||||||
|
u8 cfg_c;
|
||||||
|
u8 cfg_d;
|
||||||
|
u8 checksum;
|
||||||
|
} __attribute__ ((packed));
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -128,7 +128,6 @@ u8 smbus_read_byte(u8 dimm, u8 offset)
|
||||||
|
|
||||||
return val;
|
return val;
|
||||||
}
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Enable the smbus on vt8237r-based systems
|
* Enable the smbus on vt8237r-based systems
|
||||||
*/
|
*/
|
||||||
|
|
@ -137,11 +136,17 @@ void enable_smbus(void)
|
||||||
device_t dev;
|
device_t dev;
|
||||||
|
|
||||||
/* Power management controller */
|
/* Power management controller */
|
||||||
|
|
||||||
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
|
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
|
||||||
|
|
||||||
if (dev == PCI_DEV_INVALID)
|
if (dev == PCI_DEV_INVALID) {
|
||||||
die("Power management controller not found\r\n");
|
/* Power management controller */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
|
||||||
|
if (dev == PCI_DEV_INVALID)
|
||||||
|
die("Power management controller not found\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
/* 7 = SMBus Clock from RTC 32.768KHz
|
/* 7 = SMBus Clock from RTC 32.768KHz
|
||||||
* 5 = Internal PLL reset from susp
|
* 5 = Internal PLL reset from susp
|
||||||
|
|
@ -213,17 +218,253 @@ void smbus_fixup(const struct mem_controller *ctrl)
|
||||||
PRINT_DEBUG("Done\r\n");
|
PRINT_DEBUG("Done\r\n");
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/* fixme better separate the NB and SB, will done once it works */
|
||||||
|
|
||||||
|
void vt8237_sb_enable_fid_vid(void) {
|
||||||
|
device_t dev;
|
||||||
|
device_t devctl;
|
||||||
|
|
||||||
|
/* Power management controller */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
|
||||||
|
|
||||||
|
if (dev == PCI_DEV_INVALID) {
|
||||||
|
/* Power management controller */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
|
||||||
|
if (dev == PCI_DEV_INVALID)
|
||||||
|
return;
|
||||||
|
|
||||||
|
devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);
|
||||||
|
if (devctl == PCI_DEV_INVALID)
|
||||||
|
return;
|
||||||
|
|
||||||
|
{
|
||||||
|
u8 tmp;
|
||||||
|
tmp = pci_read_config8(devctl, 0xec);
|
||||||
|
print_debug("EC is ");
|
||||||
|
print_debug_hex8(tmp);
|
||||||
|
print_debug(" E5 is ");
|
||||||
|
tmp = pci_read_config8(dev, 0xe5);
|
||||||
|
print_debug_hex8(tmp);
|
||||||
|
|
||||||
|
}
|
||||||
|
/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
|
||||||
|
pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);
|
||||||
|
/* Enable ACPI accessm RTC signal gated with PSON. */
|
||||||
|
pci_write_config8(dev, 0x81, 0x84);
|
||||||
|
/* Allow SLP# signal to assert LDTSTOP_L.
|
||||||
|
* Will work for C3 and for FID/VID change.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* fixme */
|
||||||
|
outb(0xff, VT8237R_ACPI_IO_BASE + 0x50); //fixme maybe not needed
|
||||||
|
|
||||||
|
// outb(0x4, VT8237R_ACPI_IO_BASE + 0x50); //fixme maybe not needed
|
||||||
|
|
||||||
|
/* it seems for AMD LDTSTP is connected not to SLP anymore */
|
||||||
|
/* enable 0: DPSLP# / DPRSTP# / VRDSLP */
|
||||||
|
|
||||||
|
/* Enable SATA LED, VR timer = 100us
|
||||||
|
* Enable DPSLP# / DPRSTP# / VRDSLP - WARNING LDTSTP connetcs to some of those pins! (and not to SLP as on R ver)
|
||||||
|
*/
|
||||||
|
//fixme
|
||||||
|
pci_write_config8(dev, 0xe5, 0x69);
|
||||||
|
|
||||||
|
/* REQ5 as PCI request input - should be together with INTE-INTH.
|
||||||
|
* Fast VR timer disable - need for LDTSTP signal
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0xe4, 0xa5);
|
||||||
|
|
||||||
|
/* reduce further the STPCLK/LDTSTP signal to 5us */
|
||||||
|
|
||||||
|
pci_write_config8(dev, 0xec, 0x4);
|
||||||
|
/* Host Bus Power Management Control, maybe not needed */
|
||||||
|
pci_write_config8(dev, 0x8c, 0x5);
|
||||||
|
|
||||||
|
/* so the chip knows we are on AMD */
|
||||||
|
pci_write_config8(devctl, 0x7c, 0x77);
|
||||||
|
|
||||||
|
devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
0x2336), 0);
|
||||||
|
if (devctl == PCI_DEV_INVALID)
|
||||||
|
return;
|
||||||
|
/* Enable C2NOW delay to PSTATECTL VID / FID Change Delay to P-State Control */
|
||||||
|
pci_write_config8(devctl, 0xa6, 0x83);
|
||||||
|
|
||||||
|
//return; //FIXME fall through some revs have it old way
|
||||||
|
}
|
||||||
|
/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
|
||||||
|
pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);
|
||||||
|
/* Enable ACPI accessm RTC signal gated with PSON. */
|
||||||
|
pci_write_config8(dev, 0x81, 0x84);
|
||||||
|
/* Allow SLP# signal to assert LDTSTOP_L.
|
||||||
|
* Will work for C3 and for FID/VID change.
|
||||||
|
*/
|
||||||
|
outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
|
||||||
|
}
|
||||||
|
|
||||||
void enable_rom_decode(void)
|
void enable_rom_decode(void)
|
||||||
{
|
{
|
||||||
device_t dev;
|
device_t dev;
|
||||||
|
|
||||||
/* Bus Control and Power Management */
|
/* Power management controller */
|
||||||
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
|
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
|
||||||
|
|
||||||
if (dev == PCI_DEV_INVALID)
|
if (dev == PCI_DEV_INVALID) {
|
||||||
die("SB not found\r\n");
|
/* Power management controller */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
|
||||||
|
if (dev == PCI_DEV_INVALID)
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
/* ROM decode last 1MB FFC00000 - FFFFFFFF */
|
/* ROM decode last 1MB FFC00000 - FFFFFFFF */
|
||||||
pci_write_config8(dev, 0x41, 0x7f);
|
pci_write_config8(dev, 0x41, 0x7f);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
void vt8237_early_spi_init(void) {
|
||||||
|
device_t dev;
|
||||||
|
volatile u16 *spireg;
|
||||||
|
u32 tmp;
|
||||||
|
|
||||||
|
/* Bus Control and Power Management */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
|
||||||
|
|
||||||
|
if (dev == PCI_DEV_INVALID)
|
||||||
|
die("SB not found\r\n");
|
||||||
|
|
||||||
|
/* put SPI base 20 d0 fe */
|
||||||
|
tmp = pci_read_config32(dev, 0xbc);
|
||||||
|
pci_write_config32(dev, 0xbc, (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));
|
||||||
|
|
||||||
|
/* set SPI clock to 33MHz */
|
||||||
|
spireg = (u16 *) (VT8237S_SPI_MEM_BASE + 0x6c);
|
||||||
|
(*spireg) &= 0xff00;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* offset 0x58
|
||||||
|
* 31:20 reserved
|
||||||
|
* 19:16 4 bit position in shadow EEPROM
|
||||||
|
* 15:0 data to write
|
||||||
|
*
|
||||||
|
* offset 0x5c
|
||||||
|
* 31:28 reserved
|
||||||
|
* 27 ERDBG - enable read from 0x5c
|
||||||
|
* 26 reserved
|
||||||
|
* 25 SEELD
|
||||||
|
* 24 SEEPR - write 1 when done updating, wait until SEELD is set to 1, sticky
|
||||||
|
* cleared by reset, if it is 1 writing is disabled
|
||||||
|
* 19:16 4 bit position in shadow EEPROM
|
||||||
|
* 15:0 data from shadow EEPROM
|
||||||
|
*
|
||||||
|
* after PCIRESET SEELD and SEEPR must be 1 and 1
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* 1 = needs PCI reset, 0 don't reset, network initialized */
|
||||||
|
|
||||||
|
/* fixme maybe close the debug register after use? */
|
||||||
|
|
||||||
|
#define LAN_TIMEOUT 0x7FFFFFFF
|
||||||
|
|
||||||
|
int vt8237_early_network_init(struct vt8237_network_rom *rom) {
|
||||||
|
struct vt8237_network_rom n;
|
||||||
|
int loops;
|
||||||
|
device_t dev;
|
||||||
|
u32 tmp;
|
||||||
|
u8 status;
|
||||||
|
u16 *rom_write;
|
||||||
|
unsigned int checksum;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/* Network adapter */
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
|
||||||
|
PCI_DEVICE_ID_VIA_8233_7), 0);
|
||||||
|
|
||||||
|
if (dev == PCI_DEV_INVALID) {
|
||||||
|
print_err("Network is disabled, please enable\n");
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
tmp = pci_read_config32(dev, 0x5c);
|
||||||
|
/* enable ERDBG */
|
||||||
|
tmp |= 0x08000000;
|
||||||
|
pci_write_config32(dev, 0x5c, tmp);
|
||||||
|
|
||||||
|
status = ((pci_read_config32(dev, 0x5c) >> 24) & 0x3);
|
||||||
|
|
||||||
|
if (status == 3) {
|
||||||
|
/* network controller OK, EEPROM loaded */
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (rom == NULL) {
|
||||||
|
print_err("No configuration data specified, using default MAC!\n");
|
||||||
|
n.mac_address[0] = 0x0;
|
||||||
|
n.mac_address[1] = 0x0;
|
||||||
|
n.mac_address[2] = 0xde;
|
||||||
|
n.mac_address[3] = 0xad;
|
||||||
|
n.mac_address[4] = 0xbe;
|
||||||
|
n.mac_address[5] = 0xef;
|
||||||
|
n.phy_addr = 0x1;
|
||||||
|
n.res1 = 0x0;
|
||||||
|
n.sub_sid = 0x102;
|
||||||
|
n.sub_vid = 0x1106;
|
||||||
|
n.pid = 0x3065;
|
||||||
|
n.vid = 0x1106;
|
||||||
|
n.pmcc = 0x1f;
|
||||||
|
n.data_sel = 0x10;
|
||||||
|
n.pmu_data_reg = 0x0;
|
||||||
|
n.aux_curr = 0x0;
|
||||||
|
n.reserved = 0x0;
|
||||||
|
n.min_gnt = 0x3;
|
||||||
|
n.max_lat = 0x8;
|
||||||
|
n.bcr0 = 0x9;
|
||||||
|
n.bcr1 = 0xe;
|
||||||
|
n.cfg_a = 0x3;
|
||||||
|
n.cfg_b = 0x0;
|
||||||
|
n.cfg_c = 0x40;
|
||||||
|
n.cfg_d = 0x82;
|
||||||
|
n.checksum = 0x0;
|
||||||
|
rom = &n;
|
||||||
|
}
|
||||||
|
|
||||||
|
rom_write = (u16 *) rom;
|
||||||
|
checksum = 0;
|
||||||
|
/* write all data except checksum and second to last byte */
|
||||||
|
tmp &= 0xff000000; /* leave reserved bits in */
|
||||||
|
for (i = 0; i < 15; i++) {
|
||||||
|
pci_write_config32(dev, 0x58, tmp | (i << 16) | rom_write[i]);
|
||||||
|
/* lame code fixme */
|
||||||
|
checksum += rom_write[i] & 0xff;
|
||||||
|
//checksum %= 256;
|
||||||
|
checksum += (rom_write[i] >> 8) & 0xff;
|
||||||
|
//checksum %= 256;
|
||||||
|
}
|
||||||
|
|
||||||
|
checksum += (rom_write[15] & 0xff);
|
||||||
|
checksum = ~(checksum & 0xff);
|
||||||
|
tmp |= (((checksum & 0xff) << 8) | rom_write[15]);
|
||||||
|
|
||||||
|
/* write last byte and checksum */
|
||||||
|
pci_write_config32(dev, 0x58, (15 << 16) | tmp);
|
||||||
|
|
||||||
|
tmp = pci_read_config32(dev, 0x5c);
|
||||||
|
pci_write_config32(dev, 0x5c, tmp | 0x01000000); /* toggle SEEPR */
|
||||||
|
|
||||||
|
/* Yes, this is a mess, but it's the easiest way to do it. */
|
||||||
|
while ( (((pci_read_config32(dev, 0x5c) >> 25) & 1) == 0)
|
||||||
|
&& (loops < LAN_TIMEOUT))
|
||||||
|
++loops;
|
||||||
|
|
||||||
|
if (loops >= LAN_TIMEOUT) {
|
||||||
|
print_err("Timout - LAN controller did not accept configuration\n");
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* we are done, config will be used after PCIRST# */
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
|
||||||
|
|
@ -1,7 +1,7 @@
|
||||||
/*
|
/*
|
||||||
* This file is part of the coreboot project.
|
* This file is part of the coreboot project.
|
||||||
*
|
*
|
||||||
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
* Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
|
||||||
*
|
*
|
||||||
* This program is free software; you can redistribute it and/or modify
|
* This program is free software; you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License v2 as published by
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
|
@ -116,6 +116,8 @@ static void setup_ioapic(u32 ioapic_base)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void southbridge_init_common(struct device *dev);
|
||||||
|
|
||||||
/** Set up PCI IRQ routing, route everything through APIC. */
|
/** Set up PCI IRQ routing, route everything through APIC. */
|
||||||
static void pci_routing_fixup(struct device *dev)
|
static void pci_routing_fixup(struct device *dev)
|
||||||
{
|
{
|
||||||
|
|
@ -173,6 +175,7 @@ static void setup_pm(device_t dev)
|
||||||
|
|
||||||
/* 7 = stp to sust delay 1msec
|
/* 7 = stp to sust delay 1msec
|
||||||
* 6 = SUSST# Deasserted Before PWRGD for STD
|
* 6 = SUSST# Deasserted Before PWRGD for STD
|
||||||
|
* 4 = PWRGOOD reset on VT8237A/S
|
||||||
* 3 = GPO26/GPO27 is GPO
|
* 3 = GPO26/GPO27 is GPO
|
||||||
* 2 = Disable Alert on Lan
|
* 2 = Disable Alert on Lan
|
||||||
*/
|
*/
|
||||||
|
|
@ -181,14 +184,6 @@ static void setup_pm(device_t dev)
|
||||||
/* Disable GP3 timer. */
|
/* Disable GP3 timer. */
|
||||||
pci_write_config8(dev, 0x98, 0);
|
pci_write_config8(dev, 0x98, 0);
|
||||||
|
|
||||||
/* Enable SATA LED, disable special CPU Frequency Change -
|
|
||||||
* GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
|
|
||||||
*/
|
|
||||||
pci_write_config8(dev, 0xe5, 0x9);
|
|
||||||
|
|
||||||
/* REQ5 as PCI request input - should be together with INTE-INTH. */
|
|
||||||
pci_write_config8(dev, 0xe4, 0x4);
|
|
||||||
|
|
||||||
/* Enable ACPI accessm RTC signal gated with PSON. */
|
/* Enable ACPI accessm RTC signal gated with PSON. */
|
||||||
pci_write_config8(dev, 0x81, 0x84);
|
pci_write_config8(dev, 0x81, 0x84);
|
||||||
|
|
||||||
|
|
@ -222,6 +217,30 @@ static void setup_pm(device_t dev)
|
||||||
/* SCI is generated for RTC/pwrBtn/slpBtn. */
|
/* SCI is generated for RTC/pwrBtn/slpBtn. */
|
||||||
outw(0x001, VT8237R_ACPI_IO_BASE + 0x04);
|
outw(0x001, VT8237R_ACPI_IO_BASE + 0x04);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static void vt8237r_init(struct device *dev) {
|
||||||
|
u8 enables;
|
||||||
|
|
||||||
|
/* Enable SATA LED, disable special CPU Frequency Change -
|
||||||
|
* GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0xe5, 0x9);
|
||||||
|
|
||||||
|
/* REQ5 as PCI request input - should be together with INTE-INTH. */
|
||||||
|
pci_write_config8(dev, 0xe4, 0x4);
|
||||||
|
|
||||||
|
/* Set bit 3 of 0x4f (use INIT# as CPU reset). */
|
||||||
|
enables = pci_read_config8(dev, 0x4f);
|
||||||
|
enables |= 0x08;
|
||||||
|
pci_write_config8(dev, 0x4f, enables);
|
||||||
|
|
||||||
|
/* Set Read Pass Write Control Enable (force A2 from APIC FSB to low). */
|
||||||
|
pci_write_config8(dev, 0x48, 0x8c);
|
||||||
|
|
||||||
|
southbridge_init_common(dev);
|
||||||
|
|
||||||
/* FIXME: Intel needs more bit set for C2/C3. */
|
/* FIXME: Intel needs more bit set for C2/C3. */
|
||||||
|
|
||||||
/* Allow SLP# signal to assert LDTSTOP_L.
|
/* Allow SLP# signal to assert LDTSTOP_L.
|
||||||
|
|
@ -230,7 +249,44 @@ static void setup_pm(device_t dev)
|
||||||
outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
|
outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void vt8237r_init(struct device *dev)
|
static void vt8237s_init(struct device *dev)
|
||||||
|
{
|
||||||
|
u32 tmp;
|
||||||
|
|
||||||
|
/* put SPI base VT8237S_SPI_MEM_BASE */
|
||||||
|
tmp = pci_read_config32(dev, 0xbc);
|
||||||
|
pci_write_config32(dev, 0xbc, (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));
|
||||||
|
|
||||||
|
/* Enable SATA LED, VR timer = 100us, VR timer should be fixed */
|
||||||
|
|
||||||
|
pci_write_config8(dev, 0xe5, 0x69);
|
||||||
|
|
||||||
|
/* REQ5 as PCI request input - should be together with INTE-INTH.
|
||||||
|
* Fast VR timer disable - need for LDTSTOP_L signal
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0xe4, 0xa5);
|
||||||
|
|
||||||
|
/* reduce further the STPCLK/LDTSTP signal to 5us */
|
||||||
|
|
||||||
|
pci_write_config8(dev, 0xec, 0x4);
|
||||||
|
|
||||||
|
/* Host Bus Power Management Control, maybe not needed */
|
||||||
|
pci_write_config8(dev, 0x8c, 0x5);
|
||||||
|
|
||||||
|
/* Enable HPET at VT8237R_HPET_ADDR., does not work correctly on R */
|
||||||
|
pci_write_config32(dev, 0x68, (VT8237R_HPET_ADDR | 0x80));
|
||||||
|
|
||||||
|
southbridge_init_common(dev);
|
||||||
|
|
||||||
|
/* FIXME: Intel needs more bit set for C2/C3. */
|
||||||
|
|
||||||
|
/* Allow SLP# signal to assert LDTSTOP_L.
|
||||||
|
* Will work for C3 and for FID/VID change. FIXME FIXME, pre rev A2
|
||||||
|
*/
|
||||||
|
outb(0xff, VT8237R_ACPI_IO_BASE + 0x50);
|
||||||
|
dump_south(dev);
|
||||||
|
}
|
||||||
|
static void vt8237_common_init(struct device *dev)
|
||||||
{
|
{
|
||||||
u8 enables, byte;
|
u8 enables, byte;
|
||||||
|
|
||||||
|
|
@ -275,7 +331,7 @@ static void vt8237r_init(struct device *dev)
|
||||||
/* Delay transaction control */
|
/* Delay transaction control */
|
||||||
pci_write_config8(dev, 0x43, 0xb);
|
pci_write_config8(dev, 0x43, 0xb);
|
||||||
|
|
||||||
/* I/O recovery time */
|
/* I/O recovery time, default IDE routing */
|
||||||
pci_write_config8(dev, 0x4c, 0x44);
|
pci_write_config8(dev, 0x4c, 0x44);
|
||||||
|
|
||||||
/* ROM memory cycles go to LPC. */
|
/* ROM memory cycles go to LPC. */
|
||||||
|
|
@ -288,25 +344,14 @@ static void vt8237r_init(struct device *dev)
|
||||||
* bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch
|
* bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch
|
||||||
* 0 Dynamic Clock Gating Main Switch (1=Enable)
|
* 0 Dynamic Clock Gating Main Switch (1=Enable)
|
||||||
*/
|
*/
|
||||||
pci_write_config8(dev, 0x5b, 0x9);
|
pci_write_config8(dev, 0x5b, 0xb);
|
||||||
|
|
||||||
/* Set Read Pass Write Control Enable (force A2 from APIC FSB to low). */
|
|
||||||
pci_write_config8(dev, 0x48, 0x8c);
|
|
||||||
|
|
||||||
/* Set 0x58 to 0x43 APIC and RTC. */
|
/* Set 0x58 to 0x43 APIC and RTC. */
|
||||||
pci_write_config8(dev, 0x58, 0x43);
|
pci_write_config8(dev, 0x58, 0x43);
|
||||||
|
|
||||||
/* Set bit 3 of 0x4f (use INIT# as CPU reset). */
|
|
||||||
enables = pci_read_config8(dev, 0x4f);
|
|
||||||
enables |= 0x08;
|
|
||||||
pci_write_config8(dev, 0x4f, enables);
|
|
||||||
|
|
||||||
/* Enable serial IRQ, 6PCI clocks. */
|
/* Enable serial IRQ, 6PCI clocks. */
|
||||||
pci_write_config8(dev, 0x52, 0x9);
|
pci_write_config8(dev, 0x52, 0x9);
|
||||||
|
|
||||||
/* Enable HPET at VT8237R_HPET_ADDR. */
|
|
||||||
pci_write_config32(dev, 0x68, (VT8237R_HPET_ADDR | 0x80));
|
|
||||||
|
|
||||||
/* Power management setup */
|
/* Power management setup */
|
||||||
setup_pm(dev);
|
setup_pm(dev);
|
||||||
|
|
||||||
|
|
@ -348,25 +393,40 @@ static void init_keyboard(struct device *dev)
|
||||||
init_pc_keyboard(0x60, 0x64, 0);
|
init_pc_keyboard(0x60, 0x64, 0);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void southbridge_init(struct device *dev)
|
static void southbridge_init_common(struct device *dev)
|
||||||
{
|
{
|
||||||
vt8237r_init(dev);
|
vt8237_common_init(dev);
|
||||||
pci_routing_fixup(dev);
|
pci_routing_fixup(dev);
|
||||||
setup_ioapic(VT8237R_APIC_BASE);
|
setup_ioapic(VT8237R_APIC_BASE);
|
||||||
setup_i8259();
|
setup_i8259();
|
||||||
init_keyboard(dev);
|
init_keyboard(dev);
|
||||||
}
|
}
|
||||||
|
|
||||||
static const struct device_operations vt8237r_lpc_ops = {
|
static const struct device_operations vt8237r_lpc_ops_s = {
|
||||||
.read_resources = vt8237r_read_resources,
|
.read_resources = vt8237r_read_resources,
|
||||||
.set_resources = pci_dev_set_resources,
|
.set_resources = pci_dev_set_resources,
|
||||||
.enable_resources = vt8237r_enable_resources,
|
.enable_resources = vt8237r_enable_resources,
|
||||||
.init = &southbridge_init,
|
.init = &vt8237s_init,
|
||||||
.scan_bus = scan_static_bus,
|
.scan_bus = scan_static_bus,
|
||||||
};
|
};
|
||||||
|
|
||||||
static const struct pci_driver lpc_driver __pci_driver = {
|
|
||||||
.ops = &vt8237r_lpc_ops,
|
static const struct device_operations vt8237r_lpc_ops_r = {
|
||||||
|
.read_resources = vt8237r_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = vt8237r_enable_resources,
|
||||||
|
.init = &vt8237r_init,
|
||||||
|
.scan_bus = scan_static_bus,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pci_driver lpc_driver_r __pci_driver = {
|
||||||
|
.ops = &vt8237r_lpc_ops_r,
|
||||||
.vendor = PCI_VENDOR_ID_VIA,
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
.device = PCI_DEVICE_ID_VIA_VT8237R_LPC,
|
.device = PCI_DEVICE_ID_VIA_VT8237R_LPC,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static const struct pci_driver lpc_driver_s __pci_driver = {
|
||||||
|
.ops = &vt8237r_lpc_ops_s,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_VT8237S_LPC,
|
||||||
|
};
|
||||||
|
|
|
||||||
|
|
@ -1,7 +1,7 @@
|
||||||
/*
|
/*
|
||||||
* This file is part of the coreboot project.
|
* This file is part of the coreboot project.
|
||||||
*
|
*
|
||||||
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
|
* Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
|
||||||
*
|
*
|
||||||
* This program is free software; you can redistribute it and/or modify
|
* This program is free software; you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License v2 as published by
|
* it under the terms of the GNU General Public License v2 as published by
|
||||||
|
|
@ -24,7 +24,7 @@
|
||||||
|
|
||||||
#define SATA_MISC_CTRL 0x45
|
#define SATA_MISC_CTRL 0x45
|
||||||
|
|
||||||
static void sata_init(struct device *dev)
|
static void sata_i_init(struct device *dev)
|
||||||
{
|
{
|
||||||
u8 reg;
|
u8 reg;
|
||||||
|
|
||||||
|
|
@ -39,19 +39,82 @@ static void sata_init(struct device *dev)
|
||||||
pci_write_config8(dev, PCI_CLASS_DEVICE, 0x1);
|
pci_write_config8(dev, PCI_CLASS_DEVICE, 0x1);
|
||||||
reg |= 0x80; /* Sub Class Write Protect on */
|
reg |= 0x80; /* Sub Class Write Protect on */
|
||||||
pci_write_config8(dev, SATA_MISC_CTRL, reg);
|
pci_write_config8(dev, SATA_MISC_CTRL, reg);
|
||||||
|
|
||||||
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
static const struct device_operations sata_ops = {
|
static void sata_ii_init(struct device *dev) {
|
||||||
|
u8 reg;
|
||||||
|
|
||||||
|
sata_i_init(dev);
|
||||||
|
|
||||||
|
/* analog black magic, you may or may not need to adjust 0x60-0x6f, depends on PCB */
|
||||||
|
|
||||||
|
/* Analog PHY - gen1
|
||||||
|
* CDR bandwidth [6:5] = 3
|
||||||
|
* Squelch Window Select [4:3] = 1
|
||||||
|
* CDR Charge Pump [2:0] = 1
|
||||||
|
*/
|
||||||
|
|
||||||
|
pci_write_config8(dev, 0x64, 0x49);
|
||||||
|
|
||||||
|
/* adjust driver current source value to 9 */
|
||||||
|
reg = pci_read_config8(dev, 0x65);
|
||||||
|
reg &= 0xf0;
|
||||||
|
reg |= 0x9;
|
||||||
|
pci_write_config8(dev, 0x65, reg);
|
||||||
|
|
||||||
|
/* set all manual termination 50ohm bits [2:0] and enable [4] */
|
||||||
|
reg = pci_read_config8(dev, 0x6a);
|
||||||
|
reg |= 0xf;
|
||||||
|
pci_write_config8(dev, 0x6a, reg);
|
||||||
|
|
||||||
|
/* Analog PHY - gen2
|
||||||
|
* CDR bandwidth [5:4] = 2
|
||||||
|
* Pre / De-emphasis Level [7:6] controls bits [3:2], rest in 0x6e
|
||||||
|
* CDR Charge Pump [2:0] = 1
|
||||||
|
*/
|
||||||
|
|
||||||
|
reg = pci_read_config8(dev, 0x6f);
|
||||||
|
reg &= 0x08;
|
||||||
|
reg |= 0x61;
|
||||||
|
pci_write_config8(dev, 0x6f, reg);
|
||||||
|
|
||||||
|
/* check if staggered spinup is supported */
|
||||||
|
reg = pci_read_config8(dev, 0x83);
|
||||||
|
if ((reg & 0x8) == 0) {
|
||||||
|
/* start OOB sequence on both drives */
|
||||||
|
reg |= 0x30;
|
||||||
|
pci_write_config8(dev, 0x83, reg);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct device_operations sata_i_ops = {
|
||||||
.read_resources = pci_dev_read_resources,
|
.read_resources = pci_dev_read_resources,
|
||||||
.set_resources = pci_dev_set_resources,
|
.set_resources = pci_dev_set_resources,
|
||||||
.enable_resources = pci_dev_enable_resources,
|
.enable_resources = pci_dev_enable_resources,
|
||||||
.init = sata_init,
|
.init = sata_i_init,
|
||||||
.enable = 0,
|
.enable = 0,
|
||||||
.ops_pci = 0,
|
.ops_pci = 0,
|
||||||
};
|
};
|
||||||
|
|
||||||
static const struct pci_driver northbridge_driver __pci_driver = {
|
static const struct device_operations sata_ii_ops = {
|
||||||
.ops = &sata_ops,
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = sata_ii_init,
|
||||||
|
.enable = 0,
|
||||||
|
.ops_pci = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pci_driver northbridge_driver_ii __pci_driver = {
|
||||||
|
.ops = &sata_ii_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
|
.device = PCI_DEVICE_ID_VIA_VT8237_SATA,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pci_driver northbridge_driver_i __pci_driver = {
|
||||||
|
.ops = &sata_i_ops,
|
||||||
.vendor = PCI_VENDOR_ID_VIA,
|
.vendor = PCI_VENDOR_ID_VIA,
|
||||||
.device = PCI_DEVICE_ID_VIA_VT6420_SATA,
|
.device = PCI_DEVICE_ID_VIA_VT6420_SATA,
|
||||||
};
|
};
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue