soc/intel/broadwell: Separate PCH Kconfig

Split up PCH Kconfig into a separate file. While we're at it, also sort
selected options alphabetically.

Tested with BUILD_TIMELESS=1, coreboot.rom for the Purism Librem 13 v1
remains identical when not adding the .config file in it.

Change-Id: Ic3ff982e7108bf2d25a22e56ac2fbb93070df164
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

src/soc/intel/broadwell/Kconfig

@@ -5,58 +5,14 @@ config SOC_INTEL_BROADWELL
 
 if SOC_INTEL_BROADWELL
 
-config INTEL_LYNXPOINT_LP
-	bool
-	default y if SOC_INTEL_BROADWELL
-
 config SOC_SPECIFIC_OPTIONS
 	def_bool y
-	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
-	select ACPI_SOC_NVS
-	select AZALIA_PLUGIN_SUPPORT
-	select BOOT_DEVICE_SUPPORTS_WRITES
 	select CACHE_MRC_SETTINGS
 	select CPU_INTEL_HASWELL
-	select MRC_SETTINGS_PROTECT
 	select HAVE_DISPLAY_MTRRS
-	select HAVE_SMI_HANDLER
-	select SOUTHBRIDGE_INTEL_COMMON_ACPI_MADT
-	select SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS
-	select SOUTHBRIDGE_INTEL_COMMON_RESET
-	select SOUTHBRIDGE_INTEL_COMMON_RTC
-	select SOUTHBRIDGE_INTEL_COMMON_SMBUS
-	select SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9
-	select HAVE_USBDEBUG
-	select IOAPIC
-	select INTEL_LYNXPOINT_LP
-	select REG_SCRIPT
-	select RTC
-	select SPI_FLASH
-	select INTEL_DESCRIPTOR_MODE_CAPABLE
-	select HAVE_EM100PRO_SPI_CONSOLE_SUPPORT
 	select INTEL_GMA_ACPI
-	select HAVE_POWER_STATE_AFTER_FAILURE
+	select MRC_SETTINGS_PROTECT
-	select HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE
+	select REG_SCRIPT
-
-config PCIEXP_ASPM
-	bool
-	default y
-
-config PCIEXP_AER
-	bool
-	default y
-
-config PCIEXP_COMMON_CLOCK
-	bool
-	default y
-
-config PCIEXP_CLK_PM
-	bool
-	default y
-
-config PCIEXP_L1_SUB_STATE
-	bool
-	default y
 
 config BROADWELL_VBOOT_IN_BOOTBLOCK
 	depends on VBOOT
@@ -152,28 +108,6 @@ config RO_REGION_ONLY
 
 endif # HAVE_MRC
 
-config SERIALIO_UART_CONSOLE
-	bool
-	default n
-	select DRIVERS_UART_8250MEM_32
-	help
-	  Selected by mainboards where SerialIO UARTs can be used to retrieve
-	  coreboot logs. Boards also need to set UART_FOR_CONSOLE accordingly.
-
-config CONSOLE_UART_BASE_ADDRESS
-	default 0xd6000000 if SERIALIO_UART_CONSOLE
-
-config EHCI_BAR
-	hex
-	default 0xd8000000
-
-config SERIRQ_CONTINUOUS_MODE
-	bool
-	default y
-	help
-	  If you set this option to y, the serial IRQ machine will be
-	  operated in continuous mode.
-
 config HAVE_REFCODE_BLOB
 	depends on ARCH_X86
 	bool "An external reference code blob should be put into cbfs."
@@ -191,4 +125,6 @@ config REFCODE_BLOB_FILE
 
 endif # HAVE_REFCODE_BLOB
 
+source "src/soc/intel/broadwell/pch/Kconfig"
+
 endif

src/soc/intel/broadwell/pch/Kconfig

@@ -0,0 +1,68 @@
+config INTEL_LYNXPOINT_LP
+	bool
+	default y if SOC_INTEL_BROADWELL
+
+config PCH_SPECIFIC_OPTIONS
+	def_bool y
+	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
+	select ACPI_SOC_NVS
+	select AZALIA_PLUGIN_SUPPORT
+	select BOOT_DEVICE_SUPPORTS_WRITES
+	select HAVE_EM100PRO_SPI_CONSOLE_SUPPORT
+	select HAVE_POWER_STATE_AFTER_FAILURE
+	select HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE
+	select HAVE_SMI_HANDLER
+	select HAVE_USBDEBUG
+	select INTEL_DESCRIPTOR_MODE_CAPABLE
+	select INTEL_LYNXPOINT_LP
+	select IOAPIC
+	select RTC
+	select SOUTHBRIDGE_INTEL_COMMON_ACPI_MADT
+	select SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS
+	select SOUTHBRIDGE_INTEL_COMMON_RESET
+	select SOUTHBRIDGE_INTEL_COMMON_RTC
+	select SOUTHBRIDGE_INTEL_COMMON_SMBUS
+	select SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9
+	select SPI_FLASH
+
+config EHCI_BAR
+	hex
+	default 0xd8000000
+
+config SERIRQ_CONTINUOUS_MODE
+	bool
+	default y
+	help
+	  If you set this option to y, the serial IRQ machine will be
+	  operated in continuous mode.
+
+config PCIEXP_ASPM
+	bool
+	default y
+
+config PCIEXP_AER
+	bool
+	default y
+
+config PCIEXP_COMMON_CLOCK
+	bool
+	default y
+
+config PCIEXP_CLK_PM
+	bool
+	default y
+
+config PCIEXP_L1_SUB_STATE
+	bool
+	default y
+
+config SERIALIO_UART_CONSOLE
+	bool
+	default n
+	select DRIVERS_UART_8250MEM_32
+	help
+	  Selected by mainboards where SerialIO UARTs can be used to retrieve
+	  coreboot logs. Boards also need to set UART_FOR_CONSOLE accordingly.
+
+config CONSOLE_UART_BASE_ADDRESS
+	default 0xd6000000 if SERIALIO_UART_CONSOLE