soc/intel/ehl: Provide function to change PHY-to-MAC IRQ polarity

EHL MAC side expects a rising edge signal for an IRQ. Based on the
mainboard wiring it could be necessary to change the interrupt polarity.
This patch provides the functionality to invert a falling edge signal
that comes from an external PHY. The inverting can be activated via
devicetree parameter.

Change-Id: Ia314014c7cacbeb72629c773c8c0bb5f002a3f54
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This commit is contained in:
Mario Scheithauer 2022-04-27 11:24:05 +02:00 committed by Felix Held
parent 8698a6f5a9
commit dccdaceb49
3 changed files with 123 additions and 3 deletions

View File

@ -56,6 +56,12 @@ enum tsn_phy_type {
SGMII_plus = 3, SGMII_plus = 3,
}; };
/* TSN GBE PHY-to-MAC IRQ polarity: 0: falling edge, 1: rising edge */
enum tsn_phy_irq_polarity {
FALLING_EDGE,
RISING_EDGE,
};
/* /*
* PSE native pins and ownership assignment:- * PSE native pins and ownership assignment:-
* 0: Disable/pins are not owned by PSE/host * 0: Disable/pins are not owned by PSE/host
@ -395,6 +401,8 @@ struct soc_intel_elkhartlake_config {
bool PseTsnGbeMultiVcEnable[MAX_PSE_TSN_PORTS]; bool PseTsnGbeMultiVcEnable[MAX_PSE_TSN_PORTS];
/* PSE TSN Phy Interface Type */ /* PSE TSN Phy Interface Type */
enum tsn_phy_type PseTsnGbePhyType[MAX_PSE_TSN_PORTS]; enum tsn_phy_type PseTsnGbePhyType[MAX_PSE_TSN_PORTS];
enum tsn_phy_irq_polarity pch_tsn_phy_irq_edge;
enum tsn_phy_irq_polarity pse_tsn_phy_irq_edge[MAX_PSE_TSN_PORTS];
/* PSE related */ /* PSE related */
/* /*

View File

@ -3,13 +3,38 @@
#ifndef _SOC_ELKHARTLAKE_TSN_GBE_H_ #ifndef _SOC_ELKHARTLAKE_TSN_GBE_H_
#define _SOC_ELKHARTLAKE_TSN_GBE_H_ #define _SOC_ELKHARTLAKE_TSN_GBE_H_
#define MAC_ADDR_LEN 6 #define MAC_ADDR_LEN 6
#define TSN_MAC_ADD0_HIGH 0x300 /* MAC Address0 High register */ #define TSN_MAC_ADD0_HIGH 0x300 /* MAC Address0 High register */
#define TSN_MAC_ADD0_LOW 0x304 /* MAC Address0 Low register */ #define TSN_MAC_ADD0_LOW 0x304 /* MAC Address0 Low register */
#define TSN_GMII_TIMEOUT_MS 20
#define TSN_MAC_MDIO_ADR 0x200 /* MAC MDIO Address register */
#define TSN_MAC_MDIO_ADR_MASK 0x03FF7F0E
#define TSN_MAC_PHYAD(pa) (pa << 21) /* Physical Layer Address */
#define TSN_MAC_REGAD(rda) (rda << 16) /* Register/Device Address */
#define TSN_MAC_CLK_TRAIL_4 (4 << 12) /* 4 Trailing Clocks */
#define TSN_MAC_CSR_CLK_DIV_62 (1 << 8) /* 0001: CSR=100-150 MHz; CSR/62 */
#define TSN_MAC_OP_CMD_WRITE (1 << 2) /* GMII Operation Command Write */
#define TSN_MAC_OP_CMD_READ (3 << 2) /* GMII Operation Command Read */
#define TSN_MAC_GMII_BUSY (1 << 0) /* GMII Busy bit */
/* MDIO - Adhoc PHY Sublayer Register */
#define TSN_MAC_MDIO_ADHOC_ADR 0x15
/* Global Configuration Register */
#define TSN_MAC_MDIO_GCR 0x0
/* PHY to MAC Interrupt Polarity bit */
#define TSN_MAC_PHY2MAC_INTR_POL (1 << 6)
#define TSN_MAC_MDIO_DATA 0x204 /* MAC MDIO Data register */
/* We need one function we can call to get a MAC address to use. */ /* We need one function we can call to get a MAC address to use. */
/* This function can be coded somewhere else but must exist. */ /* This function can be coded somewhere else but must exist. */
enum cb_err mainboard_get_mac_address(struct device *dev, uint8_t mac[MAC_ADDR_LEN]); enum cb_err mainboard_get_mac_address(struct device *dev, uint8_t mac[MAC_ADDR_LEN]);
enum cb_err phy_gmii_ready(void *base);
uint16_t tsn_mdio_read(void *base, uint8_t phy_adr, uint8_t reg_adr);
void tsn_mdio_write(void *base, uint8_t phy_adr, uint8_t reg_adr, uint16_t data);
#endif /* _SOC_ELKHARTLAKE_TSN_GBE_H_ */ #endif /* _SOC_ELKHARTLAKE_TSN_GBE_H_ */

View File

@ -3,7 +3,9 @@
#include <console/console.h> #include <console/console.h>
#include <device/pci.h> #include <device/pci.h>
#include <device/pci_ids.h> #include <device/pci_ids.h>
#include <soc/soc_chip.h>
#include <soc/tsn_gbe.h> #include <soc/tsn_gbe.h>
#include <timer.h>
static void program_mac_address(struct device *dev, void *base) static void program_mac_address(struct device *dev, void *base)
{ {
@ -26,14 +28,99 @@ static void program_mac_address(struct device *dev, void *base)
(mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) | mac[0]); (mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) | mac[0]);
} }
enum cb_err phy_gmii_ready(void *base)
{
struct stopwatch sw;
stopwatch_init_msecs_expire(&sw, TSN_GMII_TIMEOUT_MS);
do {
if (!(read32((base + TSN_MAC_MDIO_ADR)) & TSN_MAC_GMII_BUSY))
return CB_SUCCESS;
} while (!stopwatch_expired(&sw));
printk(BIOS_ERR, "%s Timeout after %ld msec\n", __func__,
stopwatch_duration_msecs(&sw));
return CB_ERR;
}
uint16_t tsn_mdio_read(void *base, uint8_t phy_adr, uint8_t reg_adr)
{
uint16_t data = 0;
enum cb_err status;
clrsetbits32(base + TSN_MAC_MDIO_ADR, TSN_MAC_MDIO_ADR_MASK,
TSN_MAC_PHYAD(phy_adr) | TSN_MAC_REGAD(reg_adr)
| TSN_MAC_CLK_TRAIL_4 | TSN_MAC_CSR_CLK_DIV_62
| TSN_MAC_OP_CMD_READ | TSN_MAC_GMII_BUSY);
/* Wait for MDIO frame transfer to complete before reading MDIO DATA register */
status = phy_gmii_ready(base);
if (status == CB_ERR) {
printk(BIOS_ERR, "%s TSN GMII busy. PHY Adr: 0x%x, Reg 0x%x\n",
__func__, phy_adr, reg_adr);
} else {
data = read16(base + TSN_MAC_MDIO_DATA);
printk(BIOS_DEBUG, "%s PHY Adr: 0x%x, Reg: 0x%x , Data: 0x%x\n",
__func__, phy_adr, reg_adr, data);
}
return data;
}
void tsn_mdio_write(void *base, uint8_t phy_adr, uint8_t reg_adr, uint16_t data)
{
enum cb_err status;
setbits16(base + TSN_MAC_MDIO_DATA, data);
clrsetbits32(base + TSN_MAC_MDIO_ADR, TSN_MAC_MDIO_ADR_MASK,
TSN_MAC_PHYAD(phy_adr) | TSN_MAC_REGAD(reg_adr)
| TSN_MAC_CLK_TRAIL_4 | TSN_MAC_CSR_CLK_DIV_62
| TSN_MAC_OP_CMD_WRITE | TSN_MAC_GMII_BUSY);
/* Wait for MDIO frame transfer to complete before do next */
status = phy_gmii_ready(base);
if (status == CB_ERR)
printk(BIOS_ERR, "%s TSN GMII busy. PHY Adr: 0x%x, Reg 0x%x\n",
__func__, phy_adr, reg_adr);
else
printk(BIOS_DEBUG, "%s PHY Adr: 0x%x, Reg: 0x%x , Data: 0x%x\n",
__func__, phy_adr, reg_adr, data);
}
static void tsn_set_phy2mac_irq_polarity(void *base, enum tsn_phy_irq_polarity pol)
{
uint16_t gcr_reg;
if (pol == RISING_EDGE) {
/* Read TSN adhoc PHY sublayer register - global configuration register */
gcr_reg = tsn_mdio_read(base, TSN_MAC_MDIO_ADHOC_ADR, TSN_MAC_MDIO_GCR);
gcr_reg |= TSN_MAC_PHY2MAC_INTR_POL;
tsn_mdio_write(base, TSN_MAC_MDIO_ADHOC_ADR, TSN_MAC_MDIO_GCR, gcr_reg);
}
}
static void gbe_tsn_init(struct device *dev) static void gbe_tsn_init(struct device *dev)
{ {
/* Get the base address of the I/O registers in memory space */ /* Get the base address of the I/O registers in memory space */
struct resource *gbe_tsn_res = find_resource(dev, PCI_BASE_ADDRESS_0); struct resource *gbe_tsn_res = find_resource(dev, PCI_BASE_ADDRESS_0);
void *io_mem_base = (void *)(uintptr_t)gbe_tsn_res->base; void *io_mem_base = (void *)(uintptr_t)gbe_tsn_res->base;
config_t *config = config_of(dev);
/* Program MAC address */ /* Program MAC address */
program_mac_address(dev, io_mem_base); program_mac_address(dev, io_mem_base);
/* Set PHY-to-MAC IRQ polarity according to devicetree */
switch (dev->path.pci.devfn) {
case PCH_DEVFN_GBE:
tsn_set_phy2mac_irq_polarity(io_mem_base, config->pch_tsn_phy_irq_edge);
break;
case PCH_DEVFN_PSEGBE0:
tsn_set_phy2mac_irq_polarity(io_mem_base, config->pse_tsn_phy_irq_edge[0]);
break;
case PCH_DEVFN_PSEGBE1:
tsn_set_phy2mac_irq_polarity(io_mem_base, config->pse_tsn_phy_irq_edge[1]);
break;
}
} }
static struct device_operations gbe_tsn_ops = { static struct device_operations gbe_tsn_ops = {