mb/google/zork: Drop unnecessary PULL_UPs for dalboz reference

This change drops internal pulls for dalboz reference configured on pads
which already have external pull-ups in hardware.

GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP1800_S0
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_32: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0

BUG=b:154351731

Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit is contained in:
Furquan Shaikh 2020-07-17 11:16:50 -07:00 committed by Felix Held
parent 7571110d78
commit dce0ce954f
1 changed files with 20 additions and 21 deletions

View File

@ -10,13 +10,12 @@
#include <variant/gpio.h>
static const struct soc_amd_gpio gpio_set_stage_ram[] = {
/* PWR_BTN_L */
PAD_NF(GPIO_0, PWR_BTN_L, PULL_UP),
PAD_NF(GPIO_0, PWR_BTN_L, PULL_NONE),
/* SYS_RESET_L */
PAD_NF(GPIO_1, SYS_RESET_L, PULL_NONE),
/* PCIE_WAKE_L */
PAD_NF(GPIO_2, WAKE_L, PULL_UP),
PAD_NF(GPIO_2, WAKE_L, PULL_NONE),
/* PEN_DETECT_ODL */
PAD_WAKE(GPIO_4, PULL_NONE, EDGE_HIGH, S3),
/* PEN_POWER_EN - Enabled*/
@ -30,29 +29,29 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
/* TOUCHPAD_INT_ODL */
PAD_SCI(GPIO_9, PULL_NONE, EDGE_LOW),
/* S0iX SLP - (unused - goes to EC & FPMCU */
PAD_GPI(GPIO_10, PULL_UP),
PAD_NC(GPIO_10),
/* EC_IN_RW_OD */
PAD_GPI(GPIO_11, PULL_UP),
PAD_GPI(GPIO_11, PULL_NONE),
/* USI_INT_ODL */
PAD_GPI(GPIO_12, PULL_UP),
/* DMIC_SEL */
PAD_NF(GPIO_16, USB_OC0_L, PULL_UP),
PAD_GPI(GPIO_12, PULL_NONE),
/* USB_OC0_L - USB C0/A0 */
PAD_NF(GPIO_16, USB_OC0_L, PULL_NONE),
/* USB_OC1_L - USB C1 */
PAD_NF(GPIO_17, USB_OC1_L, PULL_UP),
PAD_NF(GPIO_17, USB_OC1_L, PULL_NONE),
/* WIFI_DISABLE */
PAD_GPO(GPIO_18, LOW),
/* EMMC_CMD */
PAD_NF(GPIO_21, EMMC_CMD, PULL_UP),
PAD_NF(GPIO_21, EMMC_CMD, PULL_NONE),
/* EC_FCH_SCI_ODL */
PAD_SCI(GPIO_22, PULL_UP, EDGE_LOW),
PAD_SCI(GPIO_22, PULL_NONE, EDGE_LOW),
/* AC_PRES */
PAD_NF(GPIO_23, AC_PRES, PULL_UP),
/* EC_FCH_WAKE_L */
PAD_SCI(GPIO_24, PULL_NONE, EDGE_LOW),
/* EC_AP_INT_ODL (Sensor Framesync) */
PAD_GPI(GPIO_31, PULL_UP),
/* */
PAD_GPI(GPIO_32, PULL_DOWN),
/* EC_AP_INT_ODL (Sensor Framesync) */
PAD_GPI(GPIO_31, PULL_NONE),
/* TP */
PAD_NC(GPIO_32),
/* DMIC_SEL */
/*
* Make sure Ext ROM Sharing is disabled before using this GPIO. Otherwise SPI flash
@ -98,11 +97,11 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
/* EMMC_DS */
PAD_NF(GPIO_109, EMMC_DS, PULL_NONE),
/* I2C2_SCL - USI/Touchpad */
PAD_NF(GPIO_113, I2C2_SCL, PULL_UP),
PAD_NF(GPIO_113, I2C2_SCL, PULL_NONE),
/* I2C2_SDA - USI/Touchpad */
PAD_NF(GPIO_114, I2C2_SDA, PULL_UP),
PAD_NF(GPIO_114, I2C2_SDA, PULL_NONE),
/* KBRST_L */
PAD_NF(GPIO_129, KBRST_L, PULL_UP),
PAD_NF(GPIO_129, KBRST_L, PULL_NONE),
/* RAM ID 0 */
PAD_GPI(GPIO_132, PULL_NONE),
/* DEV_BEEP_CODEC_IN (Dev beep Data out) */
@ -233,11 +232,11 @@ __weak void variant_pcie_gpio_configure(void)
/* NVME_AUX_RESET_L */
PAD_GPO(GPIO_40, HIGH),
/* CLK_REQ0_L - WIFI */
PAD_NF(GPIO_92, CLK_REQ0_L, PULL_UP),
PAD_NF(GPIO_92, CLK_REQ0_L, PULL_NONE),
/* CLK_REQ1_L - SD Card */
PAD_NF(GPIO_115, CLK_REQ1_L, PULL_UP),
PAD_NF(GPIO_115, CLK_REQ1_L, PULL_NONE),
/* CLK_REQ2_L - NVMe */
PAD_NF(GPIO_116, CLK_REQ2_L, PULL_UP),
PAD_NF(GPIO_116, CLK_REQ2_L, PULL_NONE),
/* SD_AUX_RESET_L */
PAD_GPO(GPIO_142, HIGH),
};