cimx/sb800: Use PCI_DEVFN()
Change-Id: I2d01714e2a72810fe1b6567e7f1b2aab00ac5c80 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This commit is contained in:
parent
0bc06ab4b1
commit
dda0fc4c13
|
@ -350,7 +350,7 @@ static void sb800_enable(struct device *dev)
|
|||
(struct southbridge_amd_cimx_sb800_config *)(dev->chip_info);
|
||||
|
||||
switch (dev->path.pci.devfn) {
|
||||
case (0x11 << 3) | 0: /* 0:11.0 SATA */
|
||||
case PCI_DEVFN(0x11, 0): /* 0:11.0 SATA */
|
||||
if (dev->enabled) {
|
||||
sb_config->SATAMODE.SataMode.SataController = CIMX_OPTION_ENABLED;
|
||||
if (1 == sb_chip->boot_switch_sata_ide)
|
||||
|
@ -362,7 +362,7 @@ static void sb800_enable(struct device *dev)
|
|||
}
|
||||
break;
|
||||
|
||||
case (0x14 << 3) | 0: /* 0:14:0 SMBUS */
|
||||
case PCI_DEVFN(0x14, 0): /* 0:14:0 SMBUS */
|
||||
clear_ioapic(VIO_APIC_VADDR);
|
||||
#if IS_ENABLED(CONFIG_CPU_AMD_AGESA)
|
||||
/* Assign the ioapic ID the next available number after the processor core local APIC IDs */
|
||||
|
@ -382,10 +382,10 @@ static void sb800_enable(struct device *dev)
|
|||
#endif
|
||||
break;
|
||||
|
||||
case (0x14 << 3) | 1: /* 0:14:1 IDE */
|
||||
case PCI_DEVFN(0x14, 1): /* 0:14:1 IDE */
|
||||
break;
|
||||
|
||||
case (0x14 << 3) | 2: /* 0:14:2 HDA */
|
||||
case PCI_DEVFN(0x14, 2): /* 0:14:2 HDA */
|
||||
if (dev->enabled) {
|
||||
if (AZALIA_DISABLE == sb_config->AzaliaController) {
|
||||
sb_config->AzaliaController = AZALIA_AUTO;
|
||||
|
@ -396,7 +396,7 @@ static void sb800_enable(struct device *dev)
|
|||
break;
|
||||
|
||||
|
||||
case (0x14 << 3) | 3: /* 0:14:3 LPC */
|
||||
case PCI_DEVFN(0x14, 3): /* 0:14:3 LPC */
|
||||
/* Initialize the fans */
|
||||
#if IS_ENABLED(CONFIG_SB800_IMC_FAN_CONTROL)
|
||||
init_sb800_IMC_fans(dev);
|
||||
|
@ -405,7 +405,7 @@ static void sb800_enable(struct device *dev)
|
|||
#endif
|
||||
break;
|
||||
|
||||
case (0x14 << 3) | 4: /* 0:14:4 PCI */
|
||||
case PCI_DEVFN(0x14, 4): /* 0:14:4 PCI */
|
||||
/* PcibConfig [PM_Reg: EAh], PCIDisable [Bit0]
|
||||
* 'PCIDisable' set to 0 to enable P2P bridge.
|
||||
* 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins
|
||||
|
@ -417,7 +417,7 @@ static void sb800_enable(struct device *dev)
|
|||
RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, BIT0);
|
||||
break;
|
||||
|
||||
case (0x14 << 3) | 6: /* 0:14:6 GEC */
|
||||
case PCI_DEVFN(0x14, 6): /* 0:14:6 GEC */
|
||||
if (dev->enabled) {
|
||||
sb_config->GecConfig = 0;
|
||||
} else {
|
||||
|
@ -425,7 +425,7 @@ static void sb800_enable(struct device *dev)
|
|||
}
|
||||
break;
|
||||
|
||||
case (0x15 << 3) | 0: /* 0:15:0 PCIe PortA */
|
||||
case PCI_DEVFN(0x15, 0): /* 0:15:0 PCIe PortA */
|
||||
{
|
||||
struct device *device;
|
||||
for (device = dev; device; device = device->sibling) {
|
||||
|
@ -443,25 +443,25 @@ static void sb800_enable(struct device *dev)
|
|||
}
|
||||
break;
|
||||
|
||||
case (0x12 << 3) | 0: /* 0:12:0 OHCI-USB1 */
|
||||
case PCI_DEVFN(0x12, 0): /* 0:12:0 OHCI-USB1 */
|
||||
sb_config->USBMODE.UsbMode.Ohci1 = dev->enabled;
|
||||
break;
|
||||
case (0x12 << 3) | 2: /* 0:12:2 EHCI-USB1 */
|
||||
case PCI_DEVFN(0x12, 2): /* 0:12:2 EHCI-USB1 */
|
||||
sb_config->USBMODE.UsbMode.Ehci1 = dev->enabled;
|
||||
break;
|
||||
case (0x13 << 3) | 0: /* 0:13:0 OHCI-USB2 */
|
||||
case PCI_DEVFN(0x13, 0): /* 0:13:0 OHCI-USB2 */
|
||||
sb_config->USBMODE.UsbMode.Ohci2 = dev->enabled;
|
||||
break;
|
||||
case (0x13 << 3) | 2: /* 0:13:2 EHCI-USB2 */
|
||||
case PCI_DEVFN(0x13, 2): /* 0:13:2 EHCI-USB2 */
|
||||
sb_config->USBMODE.UsbMode.Ehci2 = dev->enabled;
|
||||
break;
|
||||
case (0x14 << 3) | 5: /* 0:14:5 OHCI-USB4 */
|
||||
case PCI_DEVFN(0x14, 5): /* 0:14:5 OHCI-USB4 */
|
||||
sb_config->USBMODE.UsbMode.Ohci4 = dev->enabled;
|
||||
break;
|
||||
case (0x16 << 3) | 0: /* 0:16:0 OHCI-USB3 */
|
||||
case PCI_DEVFN(0x16, 0): /* 0:16:0 OHCI-USB3 */
|
||||
sb_config->USBMODE.UsbMode.Ohci3 = dev->enabled;
|
||||
break;
|
||||
case (0x16 << 3) | 2: /* 0:16:2 EHCI-USB3 */
|
||||
case PCI_DEVFN(0x16, 2): /* 0:16:2 EHCI-USB3 */
|
||||
sb_config->USBMODE.UsbMode.Ehci3 = dev->enabled;
|
||||
|
||||
/* FIXME: Find better callsites for these.
|
||||
|
|
Loading…
Reference in New Issue