GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revision 5051 broke Kconfig booting for the Tyan s2881 board. Up to 5050, there 

were two SB_HT_CHAIN_ON_BUS0 sections in the mainboard Kconfig file - one
setting the parameter to 0, the other setting it to 2.

Revision 5051 removed one of the two SB_HT_CHAIN_ON_BUS0 sections - the wrong
one. This patch fixes that.

Revision 5051 removed the wrong setting because newconfig for this board was
*also* wrong. This patch fixes that too.

Tested on real hardware, both with Kconfig and newconfig.

Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5083 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ward Vandewege 2010-02-04 03:03:39 +00:00
parent 04d74b1fdd
commit de7c6fa5fc
2 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/mainboard/tyan/s2881/Kconfig
View File

@ -24,7 +24,7 @@ config APIC_ID_OFFSET
config SB_HT_CHAIN_ON_BUS0 config SB_HT_CHAIN_ON_BUS0
int int
default 0 default 2
depends on BOARD_TYAN_S2881 depends on BOARD_TYAN_S2881
config LB_CKS_RANGE_END config LB_CKS_RANGE_END

2
src/mainboard/tyan/s2881/Options.lb
View File

@ -128,7 +128,7 @@ default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06 default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
#make the SB HT chain on bus 0, default is not (0) #make the SB HT chain on bus 0, default is not (0)
default CONFIG_SB_HT_CHAIN_ON_BUS0=0 default CONFIG_SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1) ##only offset for SB chain?, default is yes(1)
#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0