GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

mb/google/nissa/var/uldren: Add overridetree

Browse source 
Add override devicetree based on schematics(ver. 20230308).

BUG=b:272829190
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot

Change-Id: I9cd918c6a48cc6007a18c5aa94afe31fd9608718
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73974
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
This commit is contained in:
Van Chen 2023-03-21 09:34:18 +08:00 committed by Felix Held
parent f8ac3dda02
commit dea2c477f4
4 changed files with 319 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
src/mainboard/google/brya/Kconfig
View file

@ -160,6 +160,7 @@ config DRIVER_TPM_I2C_BUS
default 0x1 if BOARD_GOOGLE_AURASH
default 0x1 if BOARD_GOOGLE_HADES
default 0x0 if BOARD_GOOGLE_YAVILLA
default 0x0 if BOARD_GOOGLE_ULDREN
config DRIVER_TPM_I2C_ADDR
hex

2
src/mainboard/google/brya/Kconfig.name
View file

@ -361,6 +361,8 @@ config BOARD_GOOGLE_HADES
config BOARD_GOOGLE_ULDREN
bool "-> Uldren"
select BOARD_GOOGLE_BASEBOARD_NISSA
select DRIVERS_I2C_CS42L42
select HAVE_WWAN_POWER_SEQUENCE
config BOARD_GOOGLE_YAVILLA
bool "-> Yavilla"

4
src/mainboard/google/brya/variants/uldren/include/variant/gpio.h
View file

@ -5,4 +5,8 @@
#include <baseboard/gpio.h>
#define WWAN_FCPO GPP_D6
#define WWAN_RST GPP_F12
#define T2_OFF_MS 20
#endif

312
src/mainboard/google/brya/variants/uldren/overridetree.cb
View file

@ -1,6 +1,316 @@
chip soc/intel/alderlake
register "sagv" = "SaGv_Enabled"
# SOC Aux orientation override:
# This is a bitfield that corresponds to up to 4 TCSS ports.
# Bits (0,1) allocated for TCSS Port1 configuration and Bits (2,3)for TCSS Port2.
# TcssAuxOri = 0101b
# Bit0,Bit2 set to "1" indicates no retimer on USBC Ports
# Bit1,Bit3 set to "0" indicates Aux lines are not swapped on the
# motherboard to USBC connector
register "tcss_aux_ori" = "5"
register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}"
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # World Facing Camera
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN
register "serial_io_i2c_mode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoPci,
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
[PchSerialIoIndexI2C5] = PchSerialIoPci,
}"
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| I2C0 | TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| I2C1 | Touchscreen |
#| I2C2 | |
#| I2C3 | Audio |
#| I2C5 | Trackpad |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.i2c[0] = {
.early_init = 1,
.speed = I2C_SPEED_FAST_PLUS,
.speed_config[0] = {
.speed = I2C_SPEED_FAST_PLUS,
.scl_lcnt = 55,
.scl_hcnt = 30,
.sda_hold = 7,
}
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
.speed_config[0] = {
.speed = I2C_SPEED_FAST,
.scl_lcnt = 158,
.scl_hcnt = 79,
.sda_hold = 7,
}
},
.i2c[3] = {
.speed = I2C_SPEED_FAST,
.speed_config[0] = {
.speed = I2C_SPEED_FAST,
.scl_lcnt = 158,
.scl_hcnt = 79,
.sda_hold = 7,
}
},
.i2c[5] = {
.speed = I2C_SPEED_FAST,
.speed_config[0] = {
.speed = I2C_SPEED_FAST,
.scl_lcnt = 158,
.scl_hcnt = 79,
.sda_hold = 7,
}
},
}"
device domain 0 on
device ref cnvi_wifi on
chip drivers/wifi/generic
register "wake" = "GPE0_PME_B0"
register "enable_cnvi_ddr_rfim" = "true"
device generic 0 on end
end
end
device ref i2c1 on
chip drivers/i2c/hid
register "generic.hid" = ""WDHT0002""
register "generic.desc" = ""WDT Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "20"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "130"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "detect" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "reset_delay_ms" = "20"
register "reset_off_delay_ms" = "2"
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "stop_delay_ms" = "280"
register "stop_off_delay_ms" = "2"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""ELAN900C""
register "generic.desc" = ""ELAN Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "300"
register "generic.reset_off_delay_ms" = "1"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "300"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "6"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 16 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GXTP7996""
register "generic.desc" = ""Goodix Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "100"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "300"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "10"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 5d on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GTCH7502""
register "generic.desc" = ""G2TOUCH Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "100"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "30"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "30"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 40 on end
end
end
device ref i2c3 on
chip drivers/i2c/cs42l42
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B15)"
register "ts_inv" = "true"
register "ts_dbnc_rise" = "RISE_DEB_1000_MS"
register "ts_dbnc_fall" = "FALL_DEB_0_MS"
register "btn_det_init_dbnce" = "100"
register "btn_det_event_dbnce" = "10"
register "bias_lvls[0]" = "15"
register "bias_lvls[1]" = "8"
register "bias_lvls[2]" = "4"
register "bias_lvls[3]" = "1"
register "hs_bias_ramp_rate" = "HSBIAS_RAMP_SLOW"
register "hs_bias_sense_disable" = "true"
device i2c 48 on end
end
end
device ref i2c5 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
register "wake" = "GPE0_DW2_14"
register "detect" = "1"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GXTP7863""
register "generic.desc" = ""Goodix Touchpad""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
register "generic.wake" = "GPE0_DW2_14"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end
device ref hda on
chip drivers/generic/max98357a
register "hid" = ""MX98360A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end
device ref pch_espi on
chip ec/google/chromeec
use conn0 as mux_conn[0]
use conn1 as mux_conn[1]
device pnp 0c09.0 on end
end
end
device ref pmc hidden
chip drivers/intel/pmc_mux
device generic 0 on
chip drivers/intel/pmc_mux/conn
use usb2_port1 as usb2_port
use tcss_usb3_port1 as usb3_port
device generic 0 alias conn0 on end
end
chip drivers/intel/pmc_mux/conn
use usb2_port2 as usb2_port
use tcss_usb3_port2 as usb3_port
device generic 1 alias conn1 on end
end
end
end
end
device ref tcss_xhci on
chip drivers/usb/acpi
device ref tcss_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
device ref tcss_usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C1 (DB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
device ref tcss_usb3_port2 on end
end
end
end
end
device ref xhci on
chip drivers/usb/acpi
device ref xhci_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
device ref usb2_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C1 (DB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
device ref usb2_port2 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
device ref usb2_port3 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 WWAN""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port4 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 User Facing Camera""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port6 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 World Facing Camera""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port7 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Bluetooth""
register "type" = "UPC_TYPE_INTERNAL"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
device ref usb2_port10 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_USB3_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
device ref usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 WWAN""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb3_port2 on end
end
end
end
end
end
end