mb/google/rex: Do not power on FPMCU in ramstage
When 'reset_gpio' and 'enable_gpio' properties are defined in overridetree.cb, the kernel will power on the FPMCU. If the device was previously enabled the kernel will reset it. To avoid situation in which the FPMCU is powered on and reset later we leave the FPMCU powered off in coreboot and started by the kernel. This is exactly what other boards do (e.g. brya). TEST=Boot the board (e.g. karis) and make sure the FPMCU was booted once (e.g. examine FPMCU console logs) Change-Id: I5df8d9385be2621c02ccee2d36511a4e80ab87d1 Signed-off-by: Patryk Duda <patrykd@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80457 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
f33a7f71c3
commit
dea474624d
|
@ -69,7 +69,7 @@ static const struct pad_config gpio_table[] = {
|
|||
/* GPP_B10 : [] ==> WIFI_DISABLE_L */
|
||||
PAD_CFG_GPO(GPP_B10, 1, DEEP),
|
||||
/* GPP_B11 : [] ==> EN_FP_PWR */
|
||||
PAD_CFG_GPO_LOCK(GPP_B11, 1, LOCK_CONFIG),
|
||||
PAD_CFG_GPO_LOCK(GPP_B11, 0, LOCK_CONFIG),
|
||||
/* GPP_B12 : [] ==> SLP_SO_R_L */
|
||||
PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
|
||||
/* GPP_B13 : [] ==> PLT_RST_L */
|
||||
|
@ -140,7 +140,7 @@ static const struct pad_config gpio_table[] = {
|
|||
/* GPP_C22 : [] ==> SOC_FP_BOOT0 */
|
||||
PAD_CFG_GPO_LOCK(GPP_C22, 0, LOCK_CONFIG),
|
||||
/* GPP_C23 : [] ==> FP_RST_ODL */
|
||||
PAD_CFG_GPO_LOCK(GPP_C23, 1, LOCK_CONFIG),
|
||||
PAD_CFG_GPO_LOCK(GPP_C23, 0, LOCK_CONFIG),
|
||||
|
||||
/* GPP_D00 : Not connected. */
|
||||
PAD_NC(GPP_D00, NONE),
|
||||
|
|
|
@ -76,7 +76,7 @@ static const struct pad_config gpio_table[] = {
|
|||
/* GPP_B10 : [] ==> WIFI_DISABLE_L */
|
||||
PAD_CFG_GPO(GPP_B10, 1, DEEP),
|
||||
/* GPP_B11 : [] ==> EN_FP_PWR */
|
||||
PAD_CFG_GPO_LOCK(GPP_B11, 1, LOCK_CONFIG),
|
||||
PAD_CFG_GPO_LOCK(GPP_B11, 0, LOCK_CONFIG),
|
||||
/* GPP_B12 : [] ==> SLP_SO_R_L */
|
||||
PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
|
||||
/* GPP_B13 : [] ==> PLT_RST_L */
|
||||
|
@ -145,7 +145,7 @@ static const struct pad_config gpio_table[] = {
|
|||
/* GPP_C22 : [] ==> SOC_FP_BOOT0 */
|
||||
PAD_CFG_GPO_LOCK(GPP_C22, 0, LOCK_CONFIG),
|
||||
/* GPP_C23 : [] ==> FP_RST_ODL */
|
||||
PAD_CFG_GPO_LOCK(GPP_C23, 1, LOCK_CONFIG),
|
||||
PAD_CFG_GPO_LOCK(GPP_C23, 0, LOCK_CONFIG),
|
||||
|
||||
/* GPP_D00 : WCAM_MCLK_R */
|
||||
PAD_CFG_NF(GPP_D00, NONE, DEEP, NF1),
|
||||
|
|
|
@ -64,7 +64,7 @@ static const struct pad_config gpio_table[] = {
|
|||
/* GPP_B07 : [] ==> EN_SPKR */
|
||||
PAD_CFG_GPO(GPP_B07, 1, DEEP),
|
||||
/* GPP_B08 : [] ==> EN_FP_PWR */
|
||||
PAD_CFG_GPO_LOCK(GPP_B08, 1, LOCK_CONFIG),
|
||||
PAD_CFG_GPO_LOCK(GPP_B08, 0, LOCK_CONFIG),
|
||||
/* GPP_B09 : net NC is not present in the given design */
|
||||
PAD_NC(GPP_B09, NONE),
|
||||
/* GPP_B10 : [] ==> WIFI_DISABLE_L */
|
||||
|
@ -138,7 +138,7 @@ static const struct pad_config gpio_table[] = {
|
|||
/* GPP_C20 : [] ==> SOC_FP_BOOT0 */
|
||||
PAD_CFG_GPO_LOCK(GPP_C20, 0, LOCK_CONFIG),
|
||||
/* GPP_C21 : [] ==> FP_RST_ODL */
|
||||
PAD_CFG_GPO_LOCK(GPP_C21, 1, LOCK_CONFIG),
|
||||
PAD_CFG_GPO_LOCK(GPP_C21, 0, LOCK_CONFIG),
|
||||
/* GPP_C22 : [] ==> USB_C1_LSX_TX */
|
||||
PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1),
|
||||
/* GPP_C23 : [] ==> USB_C1_LSX_RX */
|
||||
|
|
Loading…
Reference in New Issue