Crude fixup of config files currently non parsable by buildtarget.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/technologic/ts5300/Options.lb

@@ -32,6 +32,9 @@ uses CROSS_COMPILE
 uses CC
 uses HOSTCC
 uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_COMPRESS
 
 ## ROM_SIZE is the size of boot ROM that this board will use.
 default ROM_SIZE  = 256*1024

targets/Iwill/dk8s2/Config.lb

@@ -2,86 +2,18 @@
 # the Iwill DK8S2
 # This will make a target directory of ./dk8s2
 
-loadoptions
-
 target dk8s2
 
-uses ARCH
+mainboard Iwill/DK8S2
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
- 
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses HAVE_HARD_RESET
-
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
 
 option HAVE_HARD_RESET=1
 
 option HAVE_OPTION_TABLE=1
 option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
 option ROM_SIZE=1048576
 
-option CONFIG_CONSOLE_BTEXT=1
-
 option HAVE_FALLBACK_BOOT=1
   
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
 
@@ -98,7 +30,7 @@ option IRQ_SLOT_COUNT=12
 ###
 option CONFIG_SMP=1
 option CONFIG_MAX_CPUS=2
-option CONFIG_LOGICAL_CPUS=2
+#option CONFIG_LOGICAL_CPUS=2
 option CONFIG_MAX_PHYSICAL_CPUS=2
 #
 ###
@@ -142,7 +74,7 @@ option ROM_IMAGE_SIZE=65536
 ###
 
 ## We do use compressed image
-option CONFIG_COMPRESS=1
+#option CONFIG_COMPRESS=1
 
 option CONFIG_CONSOLE_SERIAL8250=1
 option TTYS0_BAUD=115200
@@ -165,7 +97,7 @@ option DEFAULT_CONSOLE_LOGLEVEL=7
 ## At a maximum only compile in this level of debugging
 option MAXIMUM_CONSOLE_LOGLEVEL=7
 
-option DEBUG=1
+#option DEBUG=1
 
 #
 
@@ -210,7 +142,6 @@ romimage "normal"
 
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
-	mainboard Iwill/DK8S2
 	payload /usr/src/filo-0.4.1_btext/filo.elf
 #	payload /usr/src/filo-0.4.2/filo.elf
 end
@@ -229,8 +160,7 @@ romimage "fallback"
 	option XIP_ROM_SIZE = 65536
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
-	mainboard Iwill/DK8S2
+	payload ../../../payloads/filo.elf
-	payload /usr/src/filo-0.4.1_btext/filo.elf
 #	payload /usr/src/filo-0.4.2/filo.elf
 end
 

targets/newisys/khepri/Config.lb

@@ -2,77 +2,20 @@
 # Sample config file for Newisys Khepri systems
 #
 
-loadoptions
-
 # Target directory for khepri build
 target khepri
 	
-# list of all used variables:
+mainboard newisys/khepri
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-uses CC
 
 # set target C compiler to 32bit gcc.
 option CC="gcc -m32"
 
 # Configuration options.
 
-option CONFIG_CHIP_CONFIGURE=1
-
 option  MAXIMUM_CONSOLE_LOGLEVEL=8
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
 
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-
-
 # Size of the image. Khepri comes with 512k per default.
 option ROM_SIZE=524288
 
@@ -89,16 +32,14 @@ romimage "normal"
 	option USE_FALLBACK_IMAGE=0
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION="-Khepri-Normal"
-	mainboard newisys/khepri
+	payload ../../../payloads/tg3--ide_disk.zelf
-	payload /usr/share/LinuxBIOS/tg3--ide_disk.zelf
 end
 
 romimage "fallback" 
 	option USE_FALLBACK_IMAGE=1
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION="-Khepri-Fallback"
-	mainboard newisys/khepri
+	payload ../../../payloads/tg3--ide_disk.zelf
-	payload /usr/share/LinuxBIOS/tg3--ide_disk.zelf
 end
 
 buildrom ./khepri.rom ROM_SIZE "normal" "fallback"

targets/totalimpact/briq/Config.lb

@@ -1,35 +1,9 @@
 # Config file for the Total Impact briQ
 # This will make a target directory of ./briq
 
-loadoptions
-
 target briq
 	
-uses CROSS_COMPILE 
+mainboard totalimpact/briq
-uses HAVE_OPTION_TABLE
-uses CONFIG_COMPRESS 
-uses DEFAULT_CONSOLE_LOGLEVEL 
-uses CONFIG_USE_INIT
-uses NO_POST
-uses CONFIG_CONSOLE_SERIAL8250 
-uses CONFIG_IDE_STREAM 
-uses IDE_BOOT_DRIVE
-uses IDE_SWAB IDE_OFFSET 
-uses ROM_SIZE
-uses _RESET
-uses _EXCEPTION_VECTORS
-uses _ROMBASE
-uses _ROMSTART
-uses _RAMBASE
-uses _RAMSTART
-uses STACK_SIZE
-uses HEAP_SIZE
-uses CONFIG_BRIQ_750FX 
-uses CONFIG_BRIQ_7400
-
-## use a cross compiler
-#option CROSS_COMPILE="powerpc-eabi-"
-#option CROSS_COMPILE="ppc_74xx-"
 
 ## Use stage 1 initialization code
 option CONFIG_USE_INIT=1
@@ -79,7 +53,6 @@ romimage "normal"
 	option CONFIG_BRIQ_750FX=1
 	#option CONFIG_BRIQ_7400=1
 
-	mainboard totalimpact/briq
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal"