mb/google/kahlee: Add getter function for GPIO array

Instead of getting the address of the GPIO function with an extern,
add a getter function and make the GPIO arrays static.

TEST=Build Grunt; Build & boot Kahlee
BUG=b:69164070

Change-Id: I3defcb66696459b915d7d4f43234d5c08ab7d417
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/22435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit is contained in:
Martin Roth 2017-11-11 15:22:55 -07:00
parent b77bc6f5e7
commit dffd280b55
4 changed files with 17 additions and 6 deletions

View File

@ -18,17 +18,16 @@
#include <FchPlatform.h>
#include <soc/southbridge.h>
#include <stdlib.h>
extern const GPIO_CONTROL agesa_board_gpios[];
#include <baseboard/variants.h>
void platform_FchParams_reset(FCH_RESET_DATA_BLOCK *FchParams_reset)
{
FchParams_reset->EarlyOemGpioTable = (void *)agesa_board_gpios;
FchParams_reset->EarlyOemGpioTable = (void *)get_gpio_table();
}
void platform_FchParams_env(FCH_DATA_BLOCK *FchParams_env)
{
FchParams_env->PostOemGpioTable = (void *)agesa_board_gpios;
FchParams_env->PostOemGpioTable = (void *)get_gpio_table();
/* SDHCI/MMC configuration */
if (IS_ENABLED(CONFIG_BOARD_GOOGLE_KAHLEE))

View File

@ -20,10 +20,15 @@
#include <soc/southbridge.h>
#include <stdlib.h>
const GPIO_CONTROL __attribute__((weak)) agesa_board_gpios[] = {
static const GPIO_CONTROL agesa_board_gpios[] = {
};
const __attribute__((weak)) GPIO_CONTROL *get_gpio_table(void)
{
return agesa_board_gpios;
}
/*
* GPE setup table must match ACPI GPE ASL
* { gevent, gpe, direction, level }

View File

@ -19,7 +19,9 @@
#include <stddef.h>
#include <soc/smi.h>
#include <AGESA.h>
const GPIO_CONTROL *get_gpio_table(void);
const struct sci_source *get_gpe_table(size_t *num);
size_t variant_board_id(void);

View File

@ -21,7 +21,7 @@
#include <stdlib.h>
#include <variant/gpio.h>
const GPIO_CONTROL agesa_board_gpios[] = {
static const GPIO_CONTROL agesa_board_gpios[] = {
/* AGPIO2 PCIE/WLAN WAKE# SCI*/
{2, Function1, FCH_GPIO_PULL_UP_ENABLE },
@ -100,6 +100,11 @@ const GPIO_CONTROL agesa_board_gpios[] = {
{-1}
};
const GPIO_CONTROL *get_gpio_table(void)
{
return agesa_board_gpios;
}
/*
* GPE setup table must match ACPI GPE ASL
* { gevent, gpe, direction, level }