lippert frontrunner
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2172 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich
parent
566bf71d5b
commit
e0aea3bbed
|
|
@ -0,0 +1,145 @@
|
|||
##
|
||||
## Compute the location and size of where this firmware image
|
||||
## (linuxBIOS plus bootloader) will live in the boot rom chip.
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
default ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
else
|
||||
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
default ROM_SECTION_OFFSET = 0
|
||||
end
|
||||
|
||||
##
|
||||
## Compute the start location and size size of
|
||||
## The linuxBIOS bootloader.
|
||||
##
|
||||
default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
|
||||
|
||||
##
|
||||
## Compute where this copy of linuxBIOS will start in the boot rom
|
||||
##
|
||||
default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
|
||||
|
||||
##
|
||||
## Compute a range of ROM that can cached to speed up linuxBIOS,
|
||||
## execution speed.
|
||||
##
|
||||
## XIP_ROM_SIZE must be a power of 2.
|
||||
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||
##
|
||||
default XIP_ROM_SIZE=65536
|
||||
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
||||
|
||||
##
|
||||
## Set all of the defaults for an x86 architecture
|
||||
##
|
||||
|
||||
arch i386 end
|
||||
|
||||
##
|
||||
## Build the objects we have code for in this directory.
|
||||
##
|
||||
|
||||
driver mainboard.o
|
||||
|
||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
||||
#object reset.o
|
||||
|
||||
##
|
||||
## Romcc output
|
||||
##
|
||||
makerule ./failover.E
|
||||
depends "$(MAINBOARD)/failover.c ./romcc"
|
||||
action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
||||
end
|
||||
|
||||
makerule ./failover.inc
|
||||
depends "$(MAINBOARD)/failover.c ./romcc"
|
||||
action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
||||
end
|
||||
|
||||
makerule ./auto.E
|
||||
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
|
||||
action "./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
||||
end
|
||||
makerule ./auto.inc
|
||||
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
|
||||
action "./romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
||||
end
|
||||
|
||||
##
|
||||
## Build our 16 bit and 32 bit linuxBIOS entry code
|
||||
##
|
||||
mainboardinit cpu/x86/16bit/entry16.inc
|
||||
mainboardinit cpu/x86/32bit/entry32.inc
|
||||
ldscript /cpu/x86/16bit/entry16.lds
|
||||
ldscript /cpu/x86/32bit/entry32.lds
|
||||
|
||||
##
|
||||
## Build our reset vector (This is where linuxBIOS is entered)
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/x86/16bit/reset16.inc
|
||||
ldscript /cpu/x86/16bit/reset16.lds
|
||||
else
|
||||
mainboardinit cpu/x86/32bit/reset32.inc
|
||||
ldscript /cpu/x86/32bit/reset32.lds
|
||||
end
|
||||
|
||||
### Should this be in the northbridge code?
|
||||
mainboardinit arch/i386/lib/cpu_reset.inc
|
||||
|
||||
##
|
||||
## Include an id string (For safe flashing)
|
||||
##
|
||||
mainboardinit arch/i386/lib/id.inc
|
||||
ldscript /arch/i386/lib/id.lds
|
||||
|
||||
###
|
||||
### This is the early phase of linuxBIOS startup
|
||||
### Things are delicate and we test to see if we should
|
||||
### failover to another image.
|
||||
###
|
||||
if USE_FALLBACK_IMAGE
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
mainboardinit ./failover.inc
|
||||
end
|
||||
|
||||
###
|
||||
### O.k. We aren't just an intermediary anymore!
|
||||
###
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
||||
mainboardinit cpu/amd/model_gx1/cpu_setup.inc
|
||||
mainboardinit cpu/amd/model_gx1/gx_setup.inc
|
||||
mainboardinit ./auto.inc
|
||||
|
||||
##
|
||||
## Include the secondary Configuration files
|
||||
##
|
||||
dir /pc80
|
||||
config chip.h
|
||||
|
||||
chip northbridge/amd/gx2
|
||||
device pci_domain 0 on
|
||||
device pci 0.0 on end
|
||||
chip southbridge/amd/cs5535
|
||||
device pci 12.0 on
|
||||
device pci 12.1 off end # SMI
|
||||
device pci 12.2 on end # IDE
|
||||
device pci 12.3 off end # Audio
|
||||
device pci 12.4 off end # VGA
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
chip cpu/amd/model_gx2
|
||||
end
|
||||
|
||||
end
|
||||
|
||||
|
|
@ -0,0 +1,160 @@
|
|||
uses HAVE_MP_TABLE
|
||||
uses HAVE_PIRQ_TABLE
|
||||
uses USE_FALLBACK_IMAGE
|
||||
uses HAVE_FALLBACK_BOOT
|
||||
uses HAVE_HARD_RESET
|
||||
uses HAVE_OPTION_TABLE
|
||||
uses USE_OPTION_TABLE
|
||||
uses CONFIG_ROM_STREAM
|
||||
uses IRQ_SLOT_COUNT
|
||||
uses MAINBOARD
|
||||
uses MAINBOARD_VENDOR
|
||||
uses MAINBOARD_PART_NUMBER
|
||||
uses LINUXBIOS_EXTRA_VERSION
|
||||
uses ARCH
|
||||
uses FALLBACK_SIZE
|
||||
uses STACK_SIZE
|
||||
uses HEAP_SIZE
|
||||
uses ROM_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_IMAGE_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_SECTION_OFFSET
|
||||
uses CONFIG_ROM_STREAM_START
|
||||
uses PAYLOAD_SIZE
|
||||
uses _ROMBASE
|
||||
uses _RAMBASE
|
||||
uses XIP_ROM_SIZE
|
||||
uses XIP_ROM_BASE
|
||||
uses HAVE_MP_TABLE
|
||||
uses CROSS_COMPILE
|
||||
uses CC
|
||||
uses HOSTCC
|
||||
uses OBJCOPY
|
||||
uses DEFAULT_CONSOLE_LOGLEVEL
|
||||
uses MAXIMUM_CONSOLE_LOGLEVEL
|
||||
uses CONFIG_CONSOLE_SERIAL8250
|
||||
uses TTYS0_BAUD
|
||||
uses TTYS0_BASE
|
||||
uses TTYS0_LCS
|
||||
uses CONFIG_UDELAY_TSC
|
||||
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
|
||||
|
||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||
default ROM_SIZE = 256*1024
|
||||
|
||||
###
|
||||
### Build options
|
||||
###
|
||||
|
||||
##
|
||||
## Build code for the fallback boot
|
||||
##
|
||||
default HAVE_FALLBACK_BOOT=1
|
||||
|
||||
##
|
||||
## no MP table
|
||||
##
|
||||
default HAVE_MP_TABLE=0
|
||||
|
||||
##
|
||||
## Build code to reset the motherboard from linuxBIOS
|
||||
##
|
||||
default HAVE_HARD_RESET=0
|
||||
|
||||
## Delay timer options
|
||||
##
|
||||
default CONFIG_UDELAY_TSC=1
|
||||
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
|
||||
|
||||
##
|
||||
## Build code to export a programmable irq routing table
|
||||
##
|
||||
default HAVE_PIRQ_TABLE=1
|
||||
default IRQ_SLOT_COUNT=2
|
||||
#object irq_tables.o
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
##
|
||||
default HAVE_OPTION_TABLE=0
|
||||
|
||||
###
|
||||
### LinuxBIOS layout values
|
||||
###
|
||||
|
||||
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
|
||||
default ROM_IMAGE_SIZE = 65536
|
||||
default FALLBACK_SIZE = 131072
|
||||
|
||||
##
|
||||
## Use a small 8K stack
|
||||
##
|
||||
default STACK_SIZE=0x2000
|
||||
|
||||
##
|
||||
## Use a small 16K heap
|
||||
##
|
||||
default HEAP_SIZE=0x4000
|
||||
|
||||
##
|
||||
## Only use the option table in a normal image
|
||||
##
|
||||
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||
default USE_OPTION_TABLE = 0
|
||||
|
||||
default _RAMBASE = 0x00004000
|
||||
|
||||
default CONFIG_ROM_STREAM = 1
|
||||
|
||||
##
|
||||
## The default compiler
|
||||
##
|
||||
default CROSS_COMPILE=""
|
||||
default CC="$(CROSS_COMPILE)gcc -m32"
|
||||
default HOSTCC="gcc"
|
||||
|
||||
##
|
||||
## The Serial Console
|
||||
##
|
||||
|
||||
# To Enable the Serial Console
|
||||
default CONFIG_CONSOLE_SERIAL8250=1
|
||||
|
||||
## Select the serial console baud rate
|
||||
default TTYS0_BAUD=115200
|
||||
#default TTYS0_BAUD=57600
|
||||
#default TTYS0_BAUD=38400
|
||||
#default TTYS0_BAUD=19200
|
||||
#default TTYS0_BAUD=9600
|
||||
#default TTYS0_BAUD=4800
|
||||
#default TTYS0_BAUD=2400
|
||||
#default TTYS0_BAUD=1200
|
||||
|
||||
# Select the serial console base port
|
||||
default TTYS0_BASE=0x3f8
|
||||
|
||||
# Select the serial protocol
|
||||
# This defaults to 8 data bits, 1 stop bit, and no parity
|
||||
default TTYS0_LCS=0x3
|
||||
|
||||
##
|
||||
### Select the linuxBIOS loglevel
|
||||
##
|
||||
## EMERG 1 system is unusable
|
||||
## ALERT 2 action must be taken immediately
|
||||
## CRIT 3 critical conditions
|
||||
## ERR 4 error conditions
|
||||
## WARNING 5 warning conditions
|
||||
## NOTICE 6 normal but significant condition
|
||||
## INFO 7 informational
|
||||
## DEBUG 8 debug-level messages
|
||||
## SPEW 9 Way too many details
|
||||
|
||||
## Request this level of debugging output
|
||||
default DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
## At a maximum only compile in this level of debugging
|
||||
default MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
end
|
||||
|
||||
|
|
@ -0,0 +1,59 @@
|
|||
#define ASSEMBLY 1
|
||||
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <arch/hlt.h>
|
||||
#include "pc80/serial.c"
|
||||
#include "arch/i386/lib/console.c"
|
||||
#include "ram/ramtest.c"
|
||||
//#include "southbridge/intel/i440bx/i440bx_early_smbus.c"
|
||||
//#include "superio/NSC/pc97317/pc97317_early_serial.c"
|
||||
//#include "northbridge/intel/i440bx/raminit.h"
|
||||
#include "cpu/x86/bist.h"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, PC97317_SP1)
|
||||
|
||||
//#include "debug.c"
|
||||
//#include "lib/delay.c"
|
||||
|
||||
#include "northbridge/amd/gx2/raminit.c"
|
||||
|
||||
static void main(unsigned long bist)
|
||||
{
|
||||
// pc97317_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||
unsigned char i;
|
||||
while(1)
|
||||
post_code(i);
|
||||
uart_init();
|
||||
console_init();
|
||||
while (1)
|
||||
print_err("hi\n");
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
sdram_init();
|
||||
|
||||
/* Check all of memory */
|
||||
#if 0
|
||||
ram_check(0x00000000, msr.lo);
|
||||
#endif
|
||||
#if 0
|
||||
static const struct {
|
||||
unsigned long lo, hi;
|
||||
} check_addrs[] = {
|
||||
/* Check 16MB of memory @ 0*/
|
||||
{ 0x00000000, 0x01000000 },
|
||||
#if TOTAL_CPUS > 1
|
||||
/* Check 16MB of memory @ 2GB */
|
||||
{ 0x80000000, 0x81000000 },
|
||||
#endif
|
||||
};
|
||||
int i;
|
||||
for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
|
||||
ram_check(check_addrs[i].lo, check_addrs[i].hi);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
extern struct chip_operations mainboard_lippert_coolrunner_ops;
|
||||
|
||||
struct mainboard_lippert_coolrunner_config {
|
||||
int nothing;
|
||||
};
|
||||
|
|
@ -0,0 +1,74 @@
|
|||
entries
|
||||
|
||||
#start-bit length config config-ID name
|
||||
#0 8 r 0 seconds
|
||||
#8 8 r 0 alarm_seconds
|
||||
#16 8 r 0 minutes
|
||||
#24 8 r 0 alarm_minutes
|
||||
#32 8 r 0 hours
|
||||
#40 8 r 0 alarm_hours
|
||||
#48 8 r 0 day_of_week
|
||||
#56 8 r 0 day_of_month
|
||||
#64 8 r 0 month
|
||||
#72 8 r 0 year
|
||||
#80 4 r 0 rate_select
|
||||
#84 3 r 0 REF_Clock
|
||||
#87 1 r 0 UIP
|
||||
#88 1 r 0 auto_switch_DST
|
||||
#89 1 r 0 24_hour_mode
|
||||
#90 1 r 0 binary_values_enable
|
||||
#91 1 r 0 square-wave_out_enable
|
||||
#92 1 r 0 update_finished_enable
|
||||
#93 1 r 0 alarm_interrupt_enable
|
||||
#94 1 r 0 periodic_interrupt_enable
|
||||
#95 1 r 0 disable_clock_updates
|
||||
#96 288 r 0 temporary_filler
|
||||
0 384 r 0 reserved_memory
|
||||
384 1 e 4 boot_option
|
||||
385 1 e 4 last_boot
|
||||
386 1 e 1 ECC_memory
|
||||
388 4 r 0 reboot_bits
|
||||
392 3 e 5 baud_rate
|
||||
400 1 e 1 power_on_after_fail
|
||||
412 4 e 6 debug_level
|
||||
416 4 e 7 boot_first
|
||||
420 4 e 7 boot_second
|
||||
424 4 e 7 boot_third
|
||||
428 4 h 0 boot_index
|
||||
432 8 h 0 boot_countdown
|
||||
1008 16 h 0 check_sum
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
5 0 115200
|
||||
5 1 57600
|
||||
5 2 38400
|
||||
5 3 19200
|
||||
5 4 9600
|
||||
5 5 4800
|
||||
5 6 2400
|
||||
5 7 1200
|
||||
6 6 Notice
|
||||
6 7 Info
|
||||
6 8 Debug
|
||||
6 9 Spew
|
||||
7 0 Network
|
||||
7 1 HDD
|
||||
7 2 Floppy
|
||||
7 8 Fallback_Network
|
||||
7 9 Fallback_HDD
|
||||
7 10 Fallback_Floppy
|
||||
#7 3 ROM
|
||||
|
||||
checksums
|
||||
|
||||
checksum 392 1007 1008
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
|
||||
static void print_debug_pci_dev(unsigned dev)
|
||||
{
|
||||
print_debug("PCI: ");
|
||||
print_debug_hex8((dev >> 16) & 0xff);
|
||||
print_debug_char(':');
|
||||
print_debug_hex8((dev >> 11) & 0x1f);
|
||||
print_debug_char('.');
|
||||
print_debug_hex8((dev >> 8) & 7);
|
||||
}
|
||||
|
||||
static void print_pci_devices(void)
|
||||
{
|
||||
device_t dev;
|
||||
for(dev = PCI_DEV(0, 0, 0);
|
||||
dev <= PCI_DEV(0, 0x1f, 0x7);
|
||||
dev += PCI_DEV(0,0,1)) {
|
||||
uint32_t id;
|
||||
id = pci_read_config32(dev, PCI_VENDOR_ID);
|
||||
if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
|
||||
(((id >> 16) & 0xffff) == 0xffff) ||
|
||||
(((id >> 16) & 0xffff) == 0x0000)) {
|
||||
continue;
|
||||
}
|
||||
print_debug_pci_dev(dev);
|
||||
print_debug("\r\n");
|
||||
}
|
||||
}
|
||||
|
||||
static void dump_pci_device(unsigned dev)
|
||||
{
|
||||
int i;
|
||||
print_debug_pci_dev(dev);
|
||||
print_debug("\r\n");
|
||||
|
||||
for(i = 0; i <= 255; i++) {
|
||||
unsigned char val;
|
||||
if ((i & 0x0f) == 0) {
|
||||
print_debug_hex8(i);
|
||||
print_debug_char(':');
|
||||
}
|
||||
val = pci_read_config8(dev, i);
|
||||
print_debug_char(' ');
|
||||
print_debug_hex8(val);
|
||||
if ((i & 0x0f) == 0x0f) {
|
||||
print_debug("\r\n");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void dump_pci_devices(void)
|
||||
{
|
||||
device_t dev;
|
||||
for(dev = PCI_DEV(0, 0, 0);
|
||||
dev <= PCI_DEV(0, 0x1f, 0x7);
|
||||
dev += PCI_DEV(0,0,1)) {
|
||||
uint32_t id;
|
||||
id = pci_read_config32(dev, PCI_VENDOR_ID);
|
||||
if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
|
||||
(((id >> 16) & 0xffff) == 0xffff) ||
|
||||
(((id >> 16) & 0xffff) == 0x0000)) {
|
||||
continue;
|
||||
}
|
||||
dump_pci_device(dev);
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
#define ASSEMBLY 1
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <arch/io.h>
|
||||
#include "arch/romcc_io.h"
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
|
||||
static unsigned long main(unsigned long bist)
|
||||
{
|
||||
/* This is the primary cpu how should I boot? */
|
||||
if (do_normal_boot()) {
|
||||
goto normal_image;
|
||||
}
|
||||
else {
|
||||
goto fallback_image;
|
||||
}
|
||||
normal_image:
|
||||
asm volatile ("jmp __normal_image"
|
||||
: /* outputs */
|
||||
: "a" (bist) /* inputs */
|
||||
: /* clobbers */
|
||||
);
|
||||
cpu_reset:
|
||||
asm volatile ("jmp __cpu_reset"
|
||||
: /* outputs */
|
||||
: "a"(bist) /* inputs */
|
||||
: /* clobbers */
|
||||
);
|
||||
fallback_image:
|
||||
return bist;
|
||||
}
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
/* This file was generated by getpir.c, do not modify!
|
||||
(but if you do, please run checkpir on it to verify)
|
||||
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
|
||||
*
|
||||
* Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
|
||||
*/
|
||||
|
||||
#include <arch/pirq_routing.h>
|
||||
|
||||
const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32+16*2, /* there can be total 2 devices on the bus */
|
||||
0x00, /* Where the interrupt router lies (bus) */
|
||||
(0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
|
||||
0x800, /* IRQs devoted exclusively to PCI usage */
|
||||
0x1078, /* Vendor */
|
||||
0x2, /* Device */
|
||||
0, /* Crap (miniport) */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||
0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
|
||||
{
|
||||
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
|
||||
{0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
|
||||
{0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0},
|
||||
}
|
||||
};
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
return copy_pirq_routing_table(addr);
|
||||
}
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <device/pci_ops.h>
|
||||
#include <arch/io.h>
|
||||
#include "chip.h"
|
||||
|
||||
struct chip_operations mainboard_lippert_coolrunner_ops = {
|
||||
CHIP_NAME("Lippert frontrunner mainboard ")
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
#if 0
|
||||
//#include "arch/romcc_io.h"
|
||||
#include <arch/io.h>
|
||||
|
||||
typedef unsigned device_t;
|
||||
|
||||
#define PCI_DEV(BUS, DEV, FN) ( \
|
||||
(((BUS) & 0xFF) << 16) | \
|
||||
(((DEV) & 0x1f) << 11) | \
|
||||
(((FN) & 0x7) << 8))
|
||||
|
||||
static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
|
||||
{
|
||||
unsigned addr;
|
||||
addr = dev | where;
|
||||
outl(0x80000000 | (addr & ~3), 0xCF8);
|
||||
outb(value, 0xCFC + (addr & 3));
|
||||
}
|
||||
|
||||
static void pci_write_config32(device_t dev, unsigned where, unsigned value)
|
||||
{
|
||||
unsigned addr;
|
||||
addr = dev | where;
|
||||
outl(0x80000000 | (addr & ~3), 0xCF8);
|
||||
outl(value, 0xCFC);
|
||||
}
|
||||
|
||||
static unsigned pci_read_config32(device_t dev, unsigned where)
|
||||
{
|
||||
unsigned addr;
|
||||
addr = dev | where;
|
||||
outl(0x80000000 | (addr & ~3), 0xCF8);
|
||||
return inl(0xCFC);
|
||||
}
|
||||
|
||||
#include "../../../northbridge/amd/amdk8/reset_test.c"
|
||||
|
||||
void hard_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
# Config file for the AMD rumba motherboard
|
||||
# This will make a target directory of rumba
|
||||
|
||||
target rumba
|
||||
mainboard amd/rumba
|
||||
|
||||
option ROM_SIZE=1024*256
|
||||
|
||||
romimage "normal"
|
||||
option USE_FALLBACK_IMAGE=0
|
||||
option ROM_IMAGE_SIZE=0x10000
|
||||
option LINUXBIOS_EXTRA_VERSION=".0Normal"
|
||||
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
|
||||
# payload ../../../../tg3--ide_disk.zelf
|
||||
# payload ../../../../../lnxieepro100.ebi
|
||||
# payload /etc/hosts
|
||||
# payload /home/hamish/work/etherboot/eb-5.2.6-lne100.elf
|
||||
payload /tmp/filo.elf
|
||||
end
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option ROM_IMAGE_SIZE=0x10000
|
||||
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
|
||||
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
|
||||
# payload ../../../../tg3--ide_disk.zelf
|
||||
# payload ../../../../../lnxieepro100.ebia
|
||||
# payload /etc/hosts
|
||||
# payload /home/hamish/work/etherboot/eb-5.2.6-lne100.elf
|
||||
payload /tmp/filo.elf
|
||||
end
|
||||
|
||||
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
|
||||
Loading…
Reference in New Issue