get file names right
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1514 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Greg Watson
parent
bad27b10c4
commit
e126fa43dc
|
|
@ -0,0 +1,464 @@
|
||||||
|
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/chip.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include "vt8231.h"
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
void pc_keyboard_init(void);
|
||||||
|
|
||||||
|
void hard_reset(void)
|
||||||
|
{
|
||||||
|
printk_err("NO HARD RESET ON VT8231! FIX ME!\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static void usb_on(int enable)
|
||||||
|
{
|
||||||
|
unsigned char regval;
|
||||||
|
|
||||||
|
/* Base 8231 controller */
|
||||||
|
device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
|
||||||
|
/* USB controller 1 */
|
||||||
|
device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 0);
|
||||||
|
/* USB controller 2 */
|
||||||
|
device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev2);
|
||||||
|
|
||||||
|
/* enable USB1 */
|
||||||
|
if(dev2) {
|
||||||
|
if (enable) {
|
||||||
|
pci_write_config8(dev2, 0x3c, 0x05);
|
||||||
|
pci_write_config8(dev2, 0x04, 0x07);
|
||||||
|
} else {
|
||||||
|
pci_write_config8(dev2, 0x3c, 0x00);
|
||||||
|
pci_write_config8(dev2, 0x04, 0x00);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if(dev0) {
|
||||||
|
regval = pci_read_config8(dev0, 0x50);
|
||||||
|
if (enable)
|
||||||
|
regval &= ~(0x10);
|
||||||
|
else
|
||||||
|
regval |= 0x10;
|
||||||
|
pci_write_config8(dev0, 0x50, regval);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* enable USB2 */
|
||||||
|
if(dev3) {
|
||||||
|
if (enable) {
|
||||||
|
pci_write_config8(dev3, 0x3c, 0x05);
|
||||||
|
pci_write_config8(dev3, 0x04, 0x07);
|
||||||
|
} else {
|
||||||
|
pci_write_config8(dev3, 0x3c, 0x00);
|
||||||
|
pci_write_config8(dev3, 0x04, 0x00);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if(dev0) {
|
||||||
|
regval = pci_read_config8(dev0, 0x50);
|
||||||
|
if (enable)
|
||||||
|
regval &= ~(0x20);
|
||||||
|
else
|
||||||
|
regval |= 0x20;
|
||||||
|
pci_write_config8(dev0, 0x50, regval);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void keyboard_on(void)
|
||||||
|
{
|
||||||
|
unsigned char regval;
|
||||||
|
|
||||||
|
/* Base 8231 controller */
|
||||||
|
device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
|
||||||
|
|
||||||
|
/* kevinh/Ispiri - update entire function to use
|
||||||
|
new pci_write_config8 */
|
||||||
|
|
||||||
|
if (dev0) {
|
||||||
|
regval = pci_read_config8(dev0, 0x51);
|
||||||
|
regval |= 0x0f;
|
||||||
|
pci_write_config8(dev0, 0x51, regval);
|
||||||
|
}
|
||||||
|
init_pc_keyboard(0x60, 0x64, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void nvram_on(void)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* the VIA 8231 South has a very different nvram setup than the
|
||||||
|
* piix4e ...
|
||||||
|
* turn on ProMedia nvram.
|
||||||
|
* TO DO: use the PciWriteByte function here.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* kevinh/Ispiri - I don't think this is the correct address/value
|
||||||
|
* intel_conf_writeb(0x80008841, 0xFF);
|
||||||
|
*/
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Enable the ethernet device and turn off stepping (because it is integrated
|
||||||
|
* inside the southbridge)
|
||||||
|
*/
|
||||||
|
static void ethernet_fixup()
|
||||||
|
{
|
||||||
|
device_t edev;
|
||||||
|
uint8_t byte;
|
||||||
|
|
||||||
|
printk_info("Ethernet fixup\n");
|
||||||
|
|
||||||
|
edev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_7, 0);
|
||||||
|
if (edev) {
|
||||||
|
printk_debug("Configuring VIA LAN\n");
|
||||||
|
|
||||||
|
/* We don't need stepping - though the device supports it */
|
||||||
|
byte = pci_read_config8(edev, PCI_COMMAND);
|
||||||
|
byte &= ~PCI_COMMAND_WAIT;
|
||||||
|
pci_write_config8(edev, PCI_COMMAND, byte);
|
||||||
|
} else {
|
||||||
|
printk_debug("VIA LAN not found\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* we need to do things in this function so that PCI scan will find
|
||||||
|
* them. One problem here is that we can't use ANY of the new device
|
||||||
|
* stuff. This work here precedes all that.
|
||||||
|
* Fundamental problem with linuxbios V2 architecture.
|
||||||
|
* You can't do pci control in the C code without having done a PCI scan.
|
||||||
|
* But in some cases you need to to pci control in the c code before doing
|
||||||
|
* a PCI scan. But you can't use arch/romcc_io.h (the code you need) because
|
||||||
|
* that has functions with the same name but different type signatures
|
||||||
|
* (e.g. device_t). This needs to get fixed. We need low-level pci scans
|
||||||
|
* in the C code.
|
||||||
|
*/
|
||||||
|
static void vt8231_pci_enable(struct southbridge_via_vt8231_config *conf)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
unsigned long busdevfn = 0x8000;
|
||||||
|
if (conf->enable_ide) {
|
||||||
|
printk_debug("%s: enabling IDE function\n", __FUNCTION__);
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
}
|
||||||
|
|
||||||
|
/* PIRQ init
|
||||||
|
*/
|
||||||
|
void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]);
|
||||||
|
|
||||||
|
|
||||||
|
static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 };
|
||||||
|
static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 };
|
||||||
|
static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
|
||||||
|
|
||||||
|
/*
|
||||||
|
Our IDSEL mappings are as follows
|
||||||
|
PCI slot is AD31 (device 15) (00:14.0)
|
||||||
|
Southbridge is AD28 (device 12) (00:11.0)
|
||||||
|
*/
|
||||||
|
static void pci_routing_fixup(void)
|
||||||
|
{
|
||||||
|
device_t dev;
|
||||||
|
|
||||||
|
dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
|
||||||
|
printk_info("%s: dev is %p\n", __FUNCTION__, dev);
|
||||||
|
if (dev) {
|
||||||
|
/* initialize PCI interupts - these assignments depend
|
||||||
|
on the PCB routing of PINTA-D
|
||||||
|
|
||||||
|
PINTA = IRQ11
|
||||||
|
PINTB = IRQ5
|
||||||
|
PINTC = IRQ10
|
||||||
|
PINTD = IRQ12
|
||||||
|
*/
|
||||||
|
pci_write_config8(dev, 0x55, 0xb0);
|
||||||
|
pci_write_config8(dev, 0x56, 0xa5);
|
||||||
|
pci_write_config8(dev, 0x57, 0xc0);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Standard southbridge components
|
||||||
|
printk_info("setting southbridge\n");
|
||||||
|
pci_assign_irqs(0, 0x11, southbridgeIrqs);
|
||||||
|
|
||||||
|
// Ethernet built into southbridge
|
||||||
|
printk_info("setting ethernet\n");
|
||||||
|
pci_assign_irqs(0, 0x12, enetIrqs);
|
||||||
|
|
||||||
|
// PCI slot
|
||||||
|
printk_info("setting pci slot\n");
|
||||||
|
pci_assign_irqs(0, 0x14, slotIrqs);
|
||||||
|
printk_info("%s: DONE\n", __FUNCTION__);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
void
|
||||||
|
dump_south(void)
|
||||||
|
{
|
||||||
|
device_t dev0;
|
||||||
|
dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
|
||||||
|
int i,j;
|
||||||
|
|
||||||
|
for(i = 0; i < 256; i += 16) {
|
||||||
|
printk_debug("0x%x: ", i);
|
||||||
|
for(j = 0; j < 16; j++) {
|
||||||
|
printk_debug("%02x ", pci_read_config8(dev0, i+j));
|
||||||
|
}
|
||||||
|
printk_debug("\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vt8231_init(struct southbridge_via_vt8231_config *conf)
|
||||||
|
{
|
||||||
|
unsigned char enables;
|
||||||
|
device_t dev0;
|
||||||
|
device_t dev1;
|
||||||
|
device_t devpwr;
|
||||||
|
|
||||||
|
// to do: use the pcibios_find function here, instead of
|
||||||
|
// hard coding the devfn.
|
||||||
|
// done - kevinh/Ispiri
|
||||||
|
printk_debug("vt8231 init\n");
|
||||||
|
/* Base 8231 controller */
|
||||||
|
dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
|
||||||
|
/* IDE controller */
|
||||||
|
dev1 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, 0);
|
||||||
|
/* Power management controller */
|
||||||
|
devpwr = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4, 0);
|
||||||
|
|
||||||
|
// enable the internal I/O decode
|
||||||
|
enables = pci_read_config8(dev0, 0x6C);
|
||||||
|
enables |= 0x80;
|
||||||
|
pci_write_config8(dev0, 0x6C, enables);
|
||||||
|
|
||||||
|
// Map 4MB of FLASH into the address space
|
||||||
|
pci_write_config8(dev0, 0x41, 0x7f);
|
||||||
|
|
||||||
|
// Set bit 6 of 0x40, because Award does it (IO recovery time)
|
||||||
|
// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
|
||||||
|
// interrupts can be properly marked as level triggered.
|
||||||
|
enables = pci_read_config8(dev0, 0x40);
|
||||||
|
pci_write_config8(dev0, 0x40, enables);
|
||||||
|
|
||||||
|
// Set 0x42 to 0xf0 to match Award bios
|
||||||
|
enables = pci_read_config8(dev0, 0x42);
|
||||||
|
enables |= 0xf0;
|
||||||
|
pci_write_config8(dev0, 0x42, enables);
|
||||||
|
|
||||||
|
// Set bit 3 of 0x4a, to match award (dummy pci request)
|
||||||
|
enables = pci_read_config8(dev0, 0x4a);
|
||||||
|
enables |= 0x08;
|
||||||
|
pci_write_config8(dev0, 0x4a, enables);
|
||||||
|
|
||||||
|
// Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
|
||||||
|
enables = pci_read_config8(dev0, 0x4f);
|
||||||
|
enables |= 0x08;
|
||||||
|
pci_write_config8(dev0, 0x4f, enables);
|
||||||
|
|
||||||
|
// Set 0x58 to 0x03 to match Award
|
||||||
|
pci_write_config8(dev0, 0x58, 0x03);
|
||||||
|
|
||||||
|
// enable the ethernet/RTC
|
||||||
|
if(dev0) {
|
||||||
|
enables = pci_read_config8(dev0, 0x51);
|
||||||
|
enables |= 0x18;
|
||||||
|
pci_write_config8(dev0, 0x51, enables);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// enable com1 and com2.
|
||||||
|
if (conf->enable_com_ports) {
|
||||||
|
enables = pci_read_config8(dev0, 0x6e);
|
||||||
|
|
||||||
|
/* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
|
||||||
|
* is enable com port a as com1 kevinh/Ispiri - Old code
|
||||||
|
* thought 0x01 would make it com1, that was wrong enables =
|
||||||
|
* 0x80 | 0x10 | 0x8 ; pci_write_config8(dev0, 0x6e,
|
||||||
|
* enables); // note: this is also a redo of some port of
|
||||||
|
* assembly, but we want everything up.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* set com1 to 115 kbaud not clear how to do this yet.
|
||||||
|
* forget it; done in assembly.
|
||||||
|
*/
|
||||||
|
|
||||||
|
}
|
||||||
|
// enable IDE, since Linux won't do it.
|
||||||
|
// First do some more things to devfn (17,0)
|
||||||
|
// note: this should already be cleared, according to the book.
|
||||||
|
enables = pci_read_config8(dev0, 0x50);
|
||||||
|
printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
|
||||||
|
enables &= ~8; // need manifest constant here!
|
||||||
|
printk_debug("set IDE reg. 50 to 0x%x\n", enables);
|
||||||
|
pci_write_config8(dev0, 0x50, enables);
|
||||||
|
|
||||||
|
// set default interrupt values (IDE)
|
||||||
|
enables = pci_read_config8(dev0, 0x4c);
|
||||||
|
printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
|
||||||
|
// clear out whatever was there.
|
||||||
|
enables &= ~0xf;
|
||||||
|
enables |= 4;
|
||||||
|
printk_debug("setting reg. 4c to 0x%x\n", enables);
|
||||||
|
pci_write_config8(dev0, 0x4c, enables);
|
||||||
|
|
||||||
|
// set up the serial port interrupts.
|
||||||
|
// com2 to 3, com1 to 4
|
||||||
|
pci_write_config8(dev0, 0x46, 0x04);
|
||||||
|
pci_write_config8(dev0, 0x47, 0x03);
|
||||||
|
pci_write_config8(dev0, 0x6e, 0x98);
|
||||||
|
//
|
||||||
|
// Power management setup
|
||||||
|
//
|
||||||
|
// Set ACPI base address to IO 0x4000
|
||||||
|
pci_write_config32(devpwr, 0x48, 0x4001);
|
||||||
|
|
||||||
|
// Enable ACPI access (and setup like award)
|
||||||
|
pci_write_config8(devpwr, 0x41, 0x84);
|
||||||
|
|
||||||
|
// Set hardware monitor base address to IO 0x6000
|
||||||
|
pci_write_config32(devpwr, 0x70, 0x6001);
|
||||||
|
|
||||||
|
// Enable hardware monitor (and setup like award)
|
||||||
|
pci_write_config8(devpwr, 0x74, 0x01);
|
||||||
|
|
||||||
|
// set IO base address to 0x5000
|
||||||
|
pci_write_config32(devpwr, 0x90, 0x5001);
|
||||||
|
|
||||||
|
// Enable SMBus
|
||||||
|
pci_write_config8(devpwr, 0xd2, 0x01);
|
||||||
|
|
||||||
|
//
|
||||||
|
// IDE setup
|
||||||
|
//
|
||||||
|
if (! conf->enable_native_ide) {
|
||||||
|
// Run the IDE controller in 'compatiblity mode - i.e. don't use PCI
|
||||||
|
// interrupts. Using PCI ints confuses linux for some reason.
|
||||||
|
|
||||||
|
printk_info("%s: enabling compatibility IDE addresses\n", __FUNCTION__);
|
||||||
|
enables = pci_read_config8(dev1, 0x42);
|
||||||
|
printk_debug("enables in reg 0x42 0x%x\n", enables);
|
||||||
|
enables &= ~0xc0; // compatability mode
|
||||||
|
pci_write_config8(dev1, 0x42, enables);
|
||||||
|
enables = pci_read_config8(dev1, 0x42);
|
||||||
|
printk_debug("enables in reg 0x42 read back as 0x%x\n", enables);
|
||||||
|
}
|
||||||
|
|
||||||
|
enables = pci_read_config8(dev1, 0x40);
|
||||||
|
printk_debug("enables in reg 0x40 0x%x\n", enables);
|
||||||
|
enables |= 3;
|
||||||
|
pci_write_config8(dev1, 0x40, enables);
|
||||||
|
enables = pci_read_config8(dev1, 0x40);
|
||||||
|
printk_debug("enables in reg 0x40 read back as 0x%x\n", enables);
|
||||||
|
|
||||||
|
// Enable prefetch buffers
|
||||||
|
enables = pci_read_config8(dev1, 0x41);
|
||||||
|
enables |= 0xf0;
|
||||||
|
pci_write_config8(dev1, 0x41, enables);
|
||||||
|
|
||||||
|
// Lower thresholds (cause award does it)
|
||||||
|
enables = pci_read_config8(dev1, 0x43);
|
||||||
|
enables &= ~0x0f;
|
||||||
|
enables |= 0x05;
|
||||||
|
pci_write_config8(dev1, 0x43, enables);
|
||||||
|
|
||||||
|
// PIO read prefetch counter (cause award does it)
|
||||||
|
pci_write_config8(dev1, 0x44, 0x18);
|
||||||
|
|
||||||
|
// Use memory read multiple
|
||||||
|
pci_write_config8(dev1, 0x45, 0x1c);
|
||||||
|
|
||||||
|
// address decoding.
|
||||||
|
// we want "flexible", i.e. 1f0-1f7 etc. or native PCI
|
||||||
|
// kevinh@ispiri.com - the standard linux drivers seem ass slow when
|
||||||
|
// used in native mode - I've changed back to classic
|
||||||
|
enables = pci_read_config8(dev1, 0x9);
|
||||||
|
printk_debug("enables in reg 0x9 0x%x\n", enables);
|
||||||
|
// by the book, set the low-order nibble to 0xa.
|
||||||
|
if (conf->enable_native_ide) {
|
||||||
|
enables &= ~0xf;
|
||||||
|
// cf/cg silicon needs an 'f' here.
|
||||||
|
enables |= 0xf;
|
||||||
|
} else {
|
||||||
|
enables &= ~0x5;
|
||||||
|
}
|
||||||
|
|
||||||
|
pci_write_config8(dev1, 0x9, enables);
|
||||||
|
enables = pci_read_config8(dev1, 0x9);
|
||||||
|
printk_debug("enables in reg 0x9 read back as 0x%x\n", enables);
|
||||||
|
|
||||||
|
// standard bios sets master bit.
|
||||||
|
enables = pci_read_config8(dev1, 0x4);
|
||||||
|
printk_debug("command in reg 0x4 0x%x\n", enables);
|
||||||
|
enables |= 7;
|
||||||
|
|
||||||
|
// No need for stepping - kevinh@ispiri.com
|
||||||
|
enables &= ~0x80;
|
||||||
|
|
||||||
|
pci_write_config8(dev1, 0x4, enables);
|
||||||
|
enables = pci_read_config8(dev1, 0x4);
|
||||||
|
printk_debug("command in reg 0x4 reads back as 0x%x\n", enables);
|
||||||
|
|
||||||
|
if (! conf->enable_native_ide) {
|
||||||
|
// Use compatability mode - per award bios
|
||||||
|
pci_write_config32(dev1, 0x10, 0x0);
|
||||||
|
pci_write_config32(dev1, 0x14, 0x0);
|
||||||
|
pci_write_config32(dev1, 0x18, 0x0);
|
||||||
|
pci_write_config32(dev1, 0x1c, 0x0);
|
||||||
|
|
||||||
|
// Force interrupts to use compat mode - just like Award bios
|
||||||
|
pci_write_config8(dev1, 0x3d, 00);
|
||||||
|
pci_write_config8(dev1, 0x3c, 0xff);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
|
||||||
|
pci_write_config8(dev0, 0x40, 0x54);
|
||||||
|
ethernet_fixup();
|
||||||
|
|
||||||
|
// Start the rtc
|
||||||
|
rtc_init(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void southbridge_init(struct chip *chip, enum chip_pass pass)
|
||||||
|
{
|
||||||
|
|
||||||
|
struct southbridge_via_vt8231_config *conf =
|
||||||
|
(struct southbridge_via_vt8231_config *)chip->chip_info;
|
||||||
|
|
||||||
|
switch (pass) {
|
||||||
|
case CONF_PASS_PRE_PCI:
|
||||||
|
vt8231_pci_enable(conf);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CONF_PASS_POST_PCI:
|
||||||
|
vt8231_init(conf);
|
||||||
|
pci_routing_fixup();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CONF_PASS_PRE_BOOT:
|
||||||
|
dump_south();
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
/* nothing yet */
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void enumerate(struct chip *chip)
|
||||||
|
{
|
||||||
|
extern struct device_operations default_pci_ops_bus;
|
||||||
|
chip_enumerate(chip);
|
||||||
|
chip->dev->ops = &default_pci_ops_bus;
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_control southbridge_via_vt8231_control = {
|
||||||
|
.enumerate = enumerate,
|
||||||
|
.enable = southbridge_init,
|
||||||
|
.name = "VIA vt8231"
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,195 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2000
|
||||||
|
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* winbond access routines and defines*/
|
||||||
|
|
||||||
|
/* from the winbond data sheet -
|
||||||
|
The W83C553F SIO controller with PCI arbiter is a multi-function PCI device.
|
||||||
|
Function 0 is the ISA bridge, and Function 1 is the bus master IDE controller.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*ISA bridge configuration space*/
|
||||||
|
|
||||||
|
#define W83C553F_VID 0x10AD
|
||||||
|
#define W83C553F_DID 0x0565
|
||||||
|
#define W83C553F_IDE 0x0105
|
||||||
|
|
||||||
|
/* Function 0 registers */
|
||||||
|
#define W83C553F_PCICONTR 0x40 /*pci control reg*/
|
||||||
|
#define W83C553F_SGBAR 0x41 /*scatter/gather base address reg*/
|
||||||
|
#define W83C553F_LBCR 0x42 /*Line Buffer Control reg*/
|
||||||
|
#define W83C553F_IDEIRCR 0x43 /*IDE Interrupt Routing Control Reg*/
|
||||||
|
#define W83C553F_PCIIRCR 0x44 /*PCI Interrupt Routing Control Reg*/
|
||||||
|
#define W83C553F_BTBAR 0x46 /*BIOS Timer Base Address Register*/
|
||||||
|
#define W83C553F_IPADCR 0x48 /*ISA to PCI Address Decoder Control Register*/
|
||||||
|
#define W83C553F_IRADCR 0x49 /*ISA ROM Address Decoder Control Register*/
|
||||||
|
#define W83C553F_IPMHSAR 0x4a /*ISA to PCI Memory Hole STart Address Register*/
|
||||||
|
#define W83C553F_IPMHSR 0x4b /*ISA to PCI Memory Hols Size Register*/
|
||||||
|
#define W83C553F_CDR 0x4c /*Clock Divisor Register*/
|
||||||
|
#define W83C553F_CSCR 0x4d /*Chip Select Control Register*/
|
||||||
|
#define W83C553F_ATSCR 0x4e /*AT System Control register*/
|
||||||
|
#define W83C553F_ATBCR 0x4f /*AT Bus ControL Register*/
|
||||||
|
#define W83C553F_IRQBEE0R 0x60 /*IRQ Break Event Enable 0 Register*/
|
||||||
|
#define W83C553F_IRQBEE1R 0x61 /*IRQ Break Event Enable 1 Register*/
|
||||||
|
#define W83C553F_ABEER 0x62 /*Additional Break Event Enable Register*/
|
||||||
|
#define W83C553F_DMABEER 0x63 /*DMA Break Event Enable Register*/
|
||||||
|
|
||||||
|
/* Function 1 registers */
|
||||||
|
#define W83C553F_PIR 0x09 /*Programming Interface Register*/
|
||||||
|
#define W83C553F_IDECSR 0x40 /*IDE Control/Status Register*/
|
||||||
|
|
||||||
|
/* register bit definitions */
|
||||||
|
#define W83C553F_IPADCR_MBE512 0x1
|
||||||
|
#define W83C553F_IPADCR_MBE640 0x2
|
||||||
|
#define W83C553F_IPADCR_IPATOM4 0x10
|
||||||
|
#define W83C553F_IPADCR_IPATOM5 0x20
|
||||||
|
#define W83C553F_IPADCR_IPATOM6 0x40
|
||||||
|
#define W83C553F_IPADCR_IPATOM7 0x80
|
||||||
|
|
||||||
|
#define W83C553F_CSCR_UBIOSCSE 0x10
|
||||||
|
#define W83C553F_CSCR_BIOSWP 0x20
|
||||||
|
|
||||||
|
#define W83C553F_IDECSR_P0EN 0x01
|
||||||
|
#define W83C553F_IDECSR_P0F16 0x02
|
||||||
|
#define W83C553F_IDECSR_P1EN 0x10
|
||||||
|
#define W83C553F_IDECSR_P1F16 0x20
|
||||||
|
#define W83C553F_IDECSR_LEGIRQ 0x800
|
||||||
|
|
||||||
|
#define W83C553F_ATSCR_ISARE 0x40
|
||||||
|
#define W83C553F_ATSCR_FERRE 0x10
|
||||||
|
#define W83C553F_ATSCR_P92E 0x04
|
||||||
|
#define W83C553F_ATSCR_KRCEE 0x02
|
||||||
|
#define W83C553F_ATSCR_KGA20EE 0x01
|
||||||
|
|
||||||
|
#define W83C553F_PIR_BM 0x80
|
||||||
|
#define W83C553F_PIR_P1PROG 0x08
|
||||||
|
#define W83C553F_PIR_P1NL 0x04
|
||||||
|
#define W83C553F_PIR_P0PROG 0x02
|
||||||
|
#define W83C553F_PIR_P0NL 0x01
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Interrupt controller
|
||||||
|
*/
|
||||||
|
#define W83C553F_PIC1_ICW1 CONFIG_ISA_IO + 0x20
|
||||||
|
#define W83C553F_PIC1_ICW2 CONFIG_ISA_IO + 0x21
|
||||||
|
#define W83C553F_PIC1_ICW3 CONFIG_ISA_IO + 0x21
|
||||||
|
#define W83C553F_PIC1_ICW4 CONFIG_ISA_IO + 0x21
|
||||||
|
#define W83C553F_PIC1_OCW1 CONFIG_ISA_IO + 0x21
|
||||||
|
#define W83C553F_PIC1_OCW2 CONFIG_ISA_IO + 0x20
|
||||||
|
#define W83C553F_PIC1_OCW3 CONFIG_ISA_IO + 0x20
|
||||||
|
#define W83C553F_PIC1_ELC CONFIG_ISA_IO + 0x4D0
|
||||||
|
#define W83C553F_PIC2_ICW1 CONFIG_ISA_IO + 0xA0
|
||||||
|
#define W83C553F_PIC2_ICW2 CONFIG_ISA_IO + 0xA1
|
||||||
|
#define W83C553F_PIC2_ICW3 CONFIG_ISA_IO + 0xA1
|
||||||
|
#define W83C553F_PIC2_ICW4 CONFIG_ISA_IO + 0xA1
|
||||||
|
#define W83C553F_PIC2_OCW1 CONFIG_ISA_IO + 0xA1
|
||||||
|
#define W83C553F_PIC2_OCW2 CONFIG_ISA_IO + 0xA0
|
||||||
|
#define W83C553F_PIC2_OCW3 CONFIG_ISA_IO + 0xA0
|
||||||
|
#define W83C553F_PIC2_ELC CONFIG_ISA_IO + 0x4D1
|
||||||
|
|
||||||
|
#define W83C553F_TMR1_CMOD CONFIG_ISA_IO + 0x43
|
||||||
|
|
||||||
|
/*
|
||||||
|
* DMA controller
|
||||||
|
*/
|
||||||
|
#define W83C553F_DMA1 CONFIG_ISA_IO + 0x000 /* channel 0 - 3 */
|
||||||
|
#define W83C553F_DMA2 CONFIG_ISA_IO + 0x0C0 /* channel 4 - 7 */
|
||||||
|
|
||||||
|
/* command/status register bit definitions */
|
||||||
|
|
||||||
|
#define W83C553F_CS_COM_DACKAL (1<<7) /* DACK# assert level */
|
||||||
|
#define W83C553F_CS_COM_DREQSAL (1<<6) /* DREQ sense assert level */
|
||||||
|
#define W83C553F_CS_COM_GAP (1<<4) /* group arbitration priority */
|
||||||
|
#define W83C553F_CS_COM_CGE (1<<2) /* channel group enable */
|
||||||
|
|
||||||
|
#define W83C553F_CS_STAT_CH0REQ (1<<4) /* channel 0 (4) DREQ status */
|
||||||
|
#define W83C553F_CS_STAT_CH1REQ (1<<5) /* channel 1 (5) DREQ status */
|
||||||
|
#define W83C553F_CS_STAT_CH2REQ (1<<6) /* channel 2 (6) DREQ status */
|
||||||
|
#define W83C553F_CS_STAT_CH3REQ (1<<7) /* channel 3 (7) DREQ status */
|
||||||
|
|
||||||
|
#define W83C553F_CS_STAT_CH0TC (1<<0) /* channel 0 (4) TC status */
|
||||||
|
#define W83C553F_CS_STAT_CH1TC (1<<1) /* channel 1 (5) TC status */
|
||||||
|
#define W83C553F_CS_STAT_CH2TC (1<<2) /* channel 2 (6) TC status */
|
||||||
|
#define W83C553F_CS_STAT_CH3TC (1<<3) /* channel 3 (7) TC status */
|
||||||
|
|
||||||
|
/* mode register bit definitions */
|
||||||
|
|
||||||
|
#define W83C553F_MODE_TM_DEMAND (0<<6) /* transfer mode - demand */
|
||||||
|
#define W83C553F_MODE_TM_SINGLE (1<<6) /* transfer mode - single */
|
||||||
|
#define W83C553F_MODE_TM_BLOCK (2<<6) /* transfer mode - block */
|
||||||
|
#define W83C553F_MODE_TM_CASCADE (3<<6) /* transfer mode - cascade */
|
||||||
|
#define W83C553F_MODE_ADDRDEC (1<<5) /* address increment/decrement select */
|
||||||
|
#define W83C553F_MODE_AUTOINIT (1<<4) /* autoinitialize enable */
|
||||||
|
#define W83C553F_MODE_TT_VERIFY (0<<2) /* transfer type - verify */
|
||||||
|
#define W83C553F_MODE_TT_WRITE (1<<2) /* transfer type - write */
|
||||||
|
#define W83C553F_MODE_TT_READ (2<<2) /* transfer type - read */
|
||||||
|
#define W83C553F_MODE_TT_ILLEGAL (3<<2) /* transfer type - illegal */
|
||||||
|
#define W83C553F_MODE_CH0SEL (0<<0) /* channel 0 (4) select */
|
||||||
|
#define W83C553F_MODE_CH1SEL (1<<0) /* channel 1 (5) select */
|
||||||
|
#define W83C553F_MODE_CH2SEL (2<<0) /* channel 2 (6) select */
|
||||||
|
#define W83C553F_MODE_CH3SEL (3<<0) /* channel 3 (7) select */
|
||||||
|
|
||||||
|
/* request register bit definitions */
|
||||||
|
|
||||||
|
#define W83C553F_REQ_CHSERREQ (1<<2) /* channel service request */
|
||||||
|
#define W83C553F_REQ_CH0SEL (0<<0) /* channel 0 (4) select */
|
||||||
|
#define W83C553F_REQ_CH1SEL (1<<0) /* channel 1 (5) select */
|
||||||
|
#define W83C553F_REQ_CH2SEL (2<<0) /* channel 2 (6) select */
|
||||||
|
#define W83C553F_REQ_CH3SEL (3<<0) /* channel 3 (7) select */
|
||||||
|
|
||||||
|
/* write single mask bit register bit definitions */
|
||||||
|
|
||||||
|
#define W83C553F_WSMB_CHMASKSEL (1<<2) /* channel mask select */
|
||||||
|
#define W83C553F_WSMB_CH0SEL (0<<0) /* channel 0 (4) select */
|
||||||
|
#define W83C553F_WSMB_CH1SEL (1<<0) /* channel 1 (5) select */
|
||||||
|
#define W83C553F_WSMB_CH2SEL (2<<0) /* channel 2 (6) select */
|
||||||
|
#define W83C553F_WSMB_CH3SEL (3<<0) /* channel 3 (7) select */
|
||||||
|
|
||||||
|
/* read/write all mask bits register bit definitions */
|
||||||
|
|
||||||
|
#define W83C553F_RWAMB_CH0MASK (1<<0) /* channel 0 (4) mask */
|
||||||
|
#define W83C553F_RWAMB_CH1MASK (1<<1) /* channel 1 (5) mask */
|
||||||
|
#define W83C553F_RWAMB_CH2MASK (1<<2) /* channel 2 (6) mask */
|
||||||
|
#define W83C553F_RWAMB_CH3MASK (1<<3) /* channel 3 (7) mask */
|
||||||
|
|
||||||
|
/* typedefs */
|
||||||
|
|
||||||
|
#define W83C553F_DMA1_CS 0x8
|
||||||
|
#define W83C553F_DMA1_WR 0x9
|
||||||
|
#define W83C553F_DMA1_WSMB 0xA
|
||||||
|
#define W83C553F_DMA1_WM 0xB
|
||||||
|
#define W83C553F_DMA1_CBP 0xC
|
||||||
|
#define W83C553F_DMA1_MC 0xD
|
||||||
|
#define W83C553F_DMA1_CM 0xE
|
||||||
|
#define W83C553F_DMA1_RWAMB 0xF
|
||||||
|
|
||||||
|
#define W83C553F_DMA2_CS 0xD0
|
||||||
|
#define W83C553F_DMA2_WR 0xD2
|
||||||
|
#define W83C553F_DMA2_WSMB 0xD4
|
||||||
|
#define W83C553F_DMA2_WM 0xD6
|
||||||
|
#define W83C553F_DMA2_CBP 0xD8
|
||||||
|
#define W83C553F_DMA2_MC 0xDA
|
||||||
|
#define W83C553F_DMA2_CM 0xDC
|
||||||
|
#define W83C553F_DMA2_RWAMB 0xDE
|
||||||
|
|
||||||
|
void initialise_w83c553f(void);
|
||||||
|
|
@ -0,0 +1,75 @@
|
||||||
|
/*
|
||||||
|
* Enable the serial evices on the VIA
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/* The base address is 0x15c, 0x2e, depending on config bytes */
|
||||||
|
|
||||||
|
#define SIO_BASE 0x3f0
|
||||||
|
#define SIO_DATA SIO_BASE+1
|
||||||
|
|
||||||
|
static void vt8231_writesuper(uint8_t reg, uint8_t val)
|
||||||
|
{
|
||||||
|
outb(reg, SIO_BASE);
|
||||||
|
outb(val, SIO_DATA);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vt8231_writesiobyte(uint16_t reg, uint8_t val)
|
||||||
|
{
|
||||||
|
outb(val, reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vt8231_writesioword(uint16_t reg, uint16_t val)
|
||||||
|
{
|
||||||
|
outw(val, reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* regs we use: 85, and the southbridge devfn is defined by the
|
||||||
|
mainboard
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void enable_vt8231_serial(void)
|
||||||
|
{
|
||||||
|
unsigned long x;
|
||||||
|
uint8_t c;
|
||||||
|
device_t dev;
|
||||||
|
outb(6, 0x80);
|
||||||
|
dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
|
||||||
|
|
||||||
|
if (dev == PCI_DEV_INVALID) {
|
||||||
|
outb(7, 0x80);
|
||||||
|
die("Serial controller not found\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
/* first, you have to enable the superio and superio config.
|
||||||
|
put a 6 reg 80
|
||||||
|
*/
|
||||||
|
c = pci_read_config8(dev, 0x50);
|
||||||
|
c |= 6;
|
||||||
|
pci_write_config8(dev, 0x50, c);
|
||||||
|
outb(2, 0x80);
|
||||||
|
// now go ahead and set up com1.
|
||||||
|
// set address
|
||||||
|
vt8231_writesuper(0xf4, 0xfe);
|
||||||
|
// enable serial out
|
||||||
|
vt8231_writesuper(0xf2, 7);
|
||||||
|
// That's it for the sio stuff.
|
||||||
|
// movl $SUPERIOCONFIG, %eax
|
||||||
|
// movb $9, %dl
|
||||||
|
// PCI_WRITE_CONFIG_BYTE
|
||||||
|
// set up reg to set baud rate.
|
||||||
|
vt8231_writesiobyte(0x3fb, 0x80);
|
||||||
|
// Set 115 kb
|
||||||
|
vt8231_writesioword(0x3f8, 1);
|
||||||
|
// Set 9.6 kb
|
||||||
|
// WRITESIOWORD(0x3f8, 12)
|
||||||
|
// now set no parity, one stop, 8 bits
|
||||||
|
vt8231_writesiobyte(0x3fb, 3);
|
||||||
|
// now turn on RTS, DRT
|
||||||
|
vt8231_writesiobyte(0x3fc, 3);
|
||||||
|
// Enable interrupts
|
||||||
|
vt8231_writesiobyte(0x3f9, 0xf);
|
||||||
|
// should be done. Dump a char for fun.
|
||||||
|
vt8231_writesiobyte(0x3f8, 48);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,231 @@
|
||||||
|
#define SMBUS_IO_BASE 0x5000
|
||||||
|
|
||||||
|
#define SMBHSTSTAT 0x0
|
||||||
|
#define SMBSLVSTAT 0x1
|
||||||
|
#define SMBHSTCTL 0x2
|
||||||
|
#define SMBHSTCMD 0x3
|
||||||
|
#define SMBXMITADD 0x4
|
||||||
|
#define SMBHSTDAT0 0x5
|
||||||
|
#define SMBHSTDAT1 0x6
|
||||||
|
#define SMBBLKDAT 0x7
|
||||||
|
#define SMBSLVCTL 0x8
|
||||||
|
#define SMBTRNSADD 0x9
|
||||||
|
#define SMBSLVDATA 0xa
|
||||||
|
#define SMLINK_PIN_CTL 0xe
|
||||||
|
#define SMBUS_PIN_CTL 0xf
|
||||||
|
|
||||||
|
/* Define register settings */
|
||||||
|
#define HOST_RESET 0xff
|
||||||
|
#define DIMM_BASE 0xa0 // 1010000 is base for DIMM in SMBus
|
||||||
|
#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ
|
||||||
|
|
||||||
|
|
||||||
|
#define SMBUS_TIMEOUT (100*1000*10)
|
||||||
|
|
||||||
|
static void enable_smbus(void)
|
||||||
|
{
|
||||||
|
device_t dev;
|
||||||
|
unsigned char c;
|
||||||
|
/* Power management controller */
|
||||||
|
dev = pci_locate_device(PCI_ID(0x1106,0x8235), 0);
|
||||||
|
|
||||||
|
if (dev == PCI_DEV_INVALID) {
|
||||||
|
die("SMBUS controller not found\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
// set IO base address to SMBUS_IO_BASE
|
||||||
|
pci_write_config32(dev, 0x90, SMBUS_IO_BASE|1);
|
||||||
|
|
||||||
|
// Enable SMBus
|
||||||
|
c = pci_read_config8(dev, 0xd2);
|
||||||
|
c |= 5;
|
||||||
|
pci_write_config8(dev, 0xd2, c);
|
||||||
|
|
||||||
|
/* make it work for I/O ...
|
||||||
|
*/
|
||||||
|
dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
|
||||||
|
c = pci_read_config8(dev, 4);
|
||||||
|
c |= 1;
|
||||||
|
pci_write_config8(dev, 4, c);
|
||||||
|
print_debug_hex8(c);
|
||||||
|
print_debug(" is the comm register\r\n");
|
||||||
|
|
||||||
|
print_debug("SMBus controller enabled\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static inline void smbus_delay(void)
|
||||||
|
{
|
||||||
|
outb(0x80, 0x80);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_wait_until_ready(void)
|
||||||
|
{
|
||||||
|
unsigned char c;
|
||||||
|
unsigned long loops;
|
||||||
|
loops = SMBUS_TIMEOUT;
|
||||||
|
do {
|
||||||
|
unsigned char val;
|
||||||
|
smbus_delay();
|
||||||
|
c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
while((c & 1) == 1) {
|
||||||
|
print_debug("c is ");
|
||||||
|
print_debug_hex8(c);
|
||||||
|
print_debug("\r\n");
|
||||||
|
c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
/* nop */
|
||||||
|
}
|
||||||
|
|
||||||
|
} while(--loops);
|
||||||
|
return loops?0:-1;
|
||||||
|
}
|
||||||
|
|
||||||
|
void smbus_reset(void)
|
||||||
|
{
|
||||||
|
outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
|
||||||
|
smbus_wait_until_ready();
|
||||||
|
print_debug("After reset status ");
|
||||||
|
print_debug_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT));
|
||||||
|
print_debug("\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
static int smbus_wait_until_done(void)
|
||||||
|
{
|
||||||
|
unsigned long loops;
|
||||||
|
unsigned char byte;
|
||||||
|
loops = SMBUS_TIMEOUT;
|
||||||
|
do {
|
||||||
|
unsigned char val;
|
||||||
|
smbus_delay();
|
||||||
|
|
||||||
|
byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
if (byte & 1)
|
||||||
|
break;
|
||||||
|
|
||||||
|
} while(--loops);
|
||||||
|
return loops?0:-1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void smbus_print_error(unsigned char host_status_register)
|
||||||
|
{
|
||||||
|
|
||||||
|
print_err("smbus_error: ");
|
||||||
|
print_err_hex8(host_status_register);
|
||||||
|
print_err("\r\n");
|
||||||
|
if (host_status_register & (1 << 4)) {
|
||||||
|
print_err("Interrup/SMI# was Failed Bus Transaction\r\n");
|
||||||
|
}
|
||||||
|
if (host_status_register & (1 << 3)) {
|
||||||
|
print_err("Bus Error\r\n");
|
||||||
|
}
|
||||||
|
if (host_status_register & (1 << 2)) {
|
||||||
|
print_err("Device Error\r\n");
|
||||||
|
}
|
||||||
|
if (host_status_register & (1 << 1)) {
|
||||||
|
print_err("Interrupt/SMI# was Successful Completion\r\n");
|
||||||
|
}
|
||||||
|
if (host_status_register & (1 << 0)) {
|
||||||
|
print_err("Host Busy\r\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* SMBus routines borrowed from VIA's Trident Driver */
|
||||||
|
/* this works, so I am not going to touch it for now -- rgm */
|
||||||
|
static unsigned char smbus_read_byte(unsigned char devAdr,
|
||||||
|
unsigned char bIndex)
|
||||||
|
{
|
||||||
|
unsigned short i;
|
||||||
|
unsigned char bData;
|
||||||
|
unsigned char sts = 0;
|
||||||
|
|
||||||
|
/* clear host status */
|
||||||
|
outb(0xff, SMBUS_IO_BASE);
|
||||||
|
|
||||||
|
/* check SMBUS ready */
|
||||||
|
for ( i = 0; i < 0xFFFF; i++ )
|
||||||
|
if ( (inb(SMBUS_IO_BASE) & 0x01) == 0 )
|
||||||
|
break;
|
||||||
|
|
||||||
|
/* set host command */
|
||||||
|
outb(bIndex, SMBUS_IO_BASE+3);
|
||||||
|
|
||||||
|
/* set slave address */
|
||||||
|
outb(devAdr | 0x01, SMBUS_IO_BASE+4);
|
||||||
|
|
||||||
|
/* start */
|
||||||
|
outb(0x48, SMBUS_IO_BASE+2);
|
||||||
|
|
||||||
|
/* SMBUS Wait Ready */
|
||||||
|
for ( i = 0; i < 0xFFFF; i++ )
|
||||||
|
if ( ((sts = inb(SMBUS_IO_BASE)) & 0x01) == 0 )
|
||||||
|
break;
|
||||||
|
if ((sts & ~3) != 0) {
|
||||||
|
smbus_print_error(sts);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
bData=inb(SMBUS_IO_BASE+5);
|
||||||
|
|
||||||
|
return bData;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* for reference, here is the fancier version which we will use at some
|
||||||
|
* point
|
||||||
|
*/
|
||||||
|
# if 0
|
||||||
|
int smbus_read_byte(unsigned device, unsigned address, unsigned char *result)
|
||||||
|
{
|
||||||
|
unsigned char host_status_register;
|
||||||
|
unsigned char byte;
|
||||||
|
|
||||||
|
reset();
|
||||||
|
|
||||||
|
smbus_wait_until_ready();
|
||||||
|
|
||||||
|
/* setup transaction */
|
||||||
|
/* disable interrupts */
|
||||||
|
outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
|
||||||
|
/* set the device I'm talking too */
|
||||||
|
outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
|
||||||
|
/* set the command/address... */
|
||||||
|
outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
|
||||||
|
/* set up for a byte data read */
|
||||||
|
outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2),
|
||||||
|
SMBUS_IO_BASE + SMBHSTCTL);
|
||||||
|
|
||||||
|
/* clear any lingering errors, so the transaction will run */
|
||||||
|
outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
|
||||||
|
/* clear the data byte...*/
|
||||||
|
outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
|
||||||
|
|
||||||
|
/* start the command */
|
||||||
|
outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
|
||||||
|
SMBUS_IO_BASE + SMBHSTCTL);
|
||||||
|
|
||||||
|
/* poll for transaction completion */
|
||||||
|
smbus_wait_until_done();
|
||||||
|
|
||||||
|
host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
||||||
|
|
||||||
|
/* Ignore the In Use Status... */
|
||||||
|
host_status_register &= ~(1 << 6);
|
||||||
|
|
||||||
|
/* read results of transaction */
|
||||||
|
byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
|
||||||
|
smbus_print_error(byte);
|
||||||
|
|
||||||
|
*result = byte;
|
||||||
|
return host_status_register != 0x02;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
Loading…
Reference in New Issue