diff --git a/src/mainboard/intel/d810e2cb/Kconfig b/src/mainboard/intel/d810e2cb/Kconfig index 4df00c9662..cb7dd1c8b6 100644 --- a/src/mainboard/intel/d810e2cb/Kconfig +++ b/src/mainboard/intel/d810e2cb/Kconfig @@ -25,6 +25,8 @@ config BOARD_INTEL_D810E2CB select SOUTHBRIDGE_INTEL_I82801BX select SUPERIO_SMSC_SMSCSUPERIO select HAVE_PIRQ_TABLE + select HAVE_HARD_RESET + select USE_WATCHDOG_ON_BOOT select UDELAY_TSC select BOARD_ROMSIZE_KB_512 select HAVE_MAINBOARD_RESOURCES diff --git a/src/mainboard/kontron/986lcd-m/mptable.c b/src/mainboard/kontron/986lcd-m/mptable.c index 6d15f56da9..ce7a6c5fc2 100644 --- a/src/mainboard/kontron/986lcd-m/mptable.c +++ b/src/mainboard/kontron/986lcd-m/mptable.c @@ -32,7 +32,6 @@ static void *smp_write_config_table(void *v) static const char productid[12] = "986LCD-M "; struct mp_config_table *mc; struct device *riser = NULL, *firewire = NULL; - int i; int firewire_bus = 0, riser_bus = 0, isa_bus; int ioapic_id; diff --git a/src/northbridge/intel/i82810/raminit.c b/src/northbridge/intel/i82810/raminit.c index 81148e313d..f176cad14d 100644 --- a/src/northbridge/intel/i82810/raminit.c +++ b/src/northbridge/intel/i82810/raminit.c @@ -365,7 +365,7 @@ Public interface. static void sdram_set_registers(void) { u8 reg8; - u16 reg16, did; + u16 did; did = pci_read_config16(PCI_DEV(0, 0, 0), PCI_DEVICE_ID); diff --git a/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c index 66935661dd..c80ef90140 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c +++ b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c @@ -65,17 +65,3 @@ static inline int smbus_read_byte(unsigned device, unsigned address) { return do_smbus_read_byte(device, address); } - -static void smbus_write_byte(unsigned device, unsigned address, - unsigned char val) -{ - print_err("Unimplemented smbus_write_byte() called\n"); - return; -} - -static inline int smbus_write_block(unsigned device, unsigned length, - unsigned cmd, unsigned data1, - unsigned data2) -{ - return do_smbus_write_block(device, length, cmd, data1, data2); -} diff --git a/src/southbridge/intel/i82801bx/i82801bx_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_lpc.c index 241eb52f4c..8b5e4af21a 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_lpc.c +++ b/src/southbridge/intel/i82801bx/i82801bx_lpc.c @@ -72,7 +72,7 @@ typedef struct southbridge_intel_i82801bx_config config_t; * specific IRQ values in your mainboards Config.lb. */ -void i82801bx_enable_apic(struct device *dev) +static void i82801bx_enable_apic(struct device *dev) { uint32_t reg32; volatile uint32_t *ioapic_index = (volatile uint32_t *)0xfec00000; @@ -106,7 +106,7 @@ void i82801bx_enable_apic(struct device *dev) *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ } -void i82801bx_enable_serial_irqs(struct device *dev) +static void i82801bx_enable_serial_irqs(struct device *dev) { /* Set packet length and toggle silent mode bit. */ pci_write_config8(dev, SERIRQ_CNTL, @@ -211,7 +211,7 @@ static void gpio_init(device_t dev) pci_write_config8(dev, GPIO_CNTL, 0x10); } -void i82801bx_rtc_init(struct device *dev) +static void i82801bx_rtc_init(struct device *dev) { uint8_t reg8; uint32_t reg32; @@ -231,7 +231,7 @@ void i82801bx_rtc_init(struct device *dev) pci_write_config8(dev, RTC_CONF, 0x04); } -void i82801bx_lpc_route_dma(struct device *dev, uint8_t mask) +static void i82801bx_lpc_route_dma(struct device *dev, uint8_t mask) { uint16_t reg16; int i; diff --git a/src/southbridge/intel/i82801bx/i82801bx_reset.c b/src/southbridge/intel/i82801bx/i82801bx_reset.c index 239a727968..8d85cdca75 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_reset.c +++ b/src/southbridge/intel/i82801bx/i82801bx_reset.c @@ -19,6 +19,7 @@ */ #include +#include void hard_reset(void) { diff --git a/src/southbridge/intel/i82801bx/i82801bx_smbus.h b/src/southbridge/intel/i82801bx/i82801bx_smbus.h index 6287b631af..5586ac752c 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_smbus.h +++ b/src/southbridge/intel/i82801bx/i82801bx_smbus.h @@ -110,74 +110,3 @@ static int do_smbus_read_byte(unsigned device, unsigned address) return byte; } -/* This function is neither used nor tested by me (Corey Osgood), the author -(Yinghai) probably tested/used it on i82801er */ -static int do_smbus_write_block(unsigned device, unsigned length, unsigned cmd, - unsigned data1, unsigned data2) -{ -#warning "do_smbus_write_block is commented out" - print_err("Untested smbus_write_block called\n"); -#if 0 - unsigned char global_control_register; - unsigned char global_status_register; - unsigned char byte; - unsigned char stat; - int i; - - /* Clear the PM timeout flags, SECOND_TO_STS */ - outw(inw(0x0400 + 0x66), 0x0400 + 0x66); - - if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) { - return -2; - } - - /* Setup transaction */ - /* Obtain ownership */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - for (stat = 0; (stat & 0x40) == 0;) { - stat = inb(SMBUS_IO_BASE + SMBHSTSTAT); - } - /* Clear the done bit */ - outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT); - /* Disable interrupts */ - outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); - - /* Set the device I'm talking too */ - outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD); - - /* Set the command address */ - outb(cmd & 0xff, SMBUS_IO_BASE + SMBHSTCMD); - - /* Set the block length */ - outb(length & 0xff, SMBUS_IO_BASE + SMBHSTDAT0); - - /* Try sending out the first byte of data here */ - byte = (data1 >> (0)) & 0x0ff; - outb(byte, SMBUS_IO_BASE + SMBBLKDAT); - /* Issue a block write command */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x5 << 2) | 0x40, - SMBUS_IO_BASE + SMBHSTCTL); - - for (i = 0; i < length; i++) { - - /* Poll for transaction completion */ - if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) { - return -3; - } - - /* Load the next byte */ - if (i > 3) - byte = (data2 >> (i % 4)) & 0x0ff; - else - byte = (data1 >> (i)) & 0x0ff; - outb(byte, SMBUS_IO_BASE + SMBBLKDAT); - - /* Clear the done bit */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), - SMBUS_IO_BASE + SMBHSTSTAT); - } - - print_debug("SMBUS Block complete\n"); - return 0; -#endif -} diff --git a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c index fcb08a1a0c..cd0c20d98e 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c +++ b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c @@ -22,6 +22,7 @@ #include #include #include +#include /* TODO: I'm fairly sure the same functionality is provided elsewhere. */