Cosmetics in ioapic.c (trivial, no functional changes).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5952 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
212d0a2eae
commit
e49903650c
|
@ -34,7 +34,6 @@ static void io_apic_write(u32 ioapic_base, u32 reg, u32 value)
|
||||||
write32(ioapic_base + 0x10, value);
|
write32(ioapic_base + 0x10, value);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
void clear_ioapic(u32 ioapic_base)
|
void clear_ioapic(u32 ioapic_base)
|
||||||
{
|
{
|
||||||
u32 low, high;
|
u32 low, high;
|
||||||
|
@ -42,8 +41,8 @@ void clear_ioapic(u32 ioapic_base)
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "IOAPIC: Clearing IOAPIC at 0x%08x\n", ioapic_base);
|
printk(BIOS_DEBUG, "IOAPIC: Clearing IOAPIC at 0x%08x\n", ioapic_base);
|
||||||
|
|
||||||
/* Read the available number of interrupts */
|
/* Read the available number of interrupts. */
|
||||||
ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff;
|
ioapic_interrupts = (io_apic_read(ioapic_base, 0x01) >> 16) & 0xff;
|
||||||
if (!ioapic_interrupts || ioapic_interrupts == 0xff)
|
if (!ioapic_interrupts || ioapic_interrupts == 0xff)
|
||||||
ioapic_interrupts = 24;
|
ioapic_interrupts = 24;
|
||||||
printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts);
|
printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts);
|
||||||
|
@ -55,11 +54,12 @@ void clear_ioapic(u32 ioapic_base)
|
||||||
io_apic_write(ioapic_base, i * 2 + 0x10, low);
|
io_apic_write(ioapic_base, i * 2 + 0x10, low);
|
||||||
io_apic_write(ioapic_base, i * 2 + 0x11, high);
|
io_apic_write(ioapic_base, i * 2 + 0x11, high);
|
||||||
|
|
||||||
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low);
|
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n",
|
||||||
|
i, high, low);
|
||||||
}
|
}
|
||||||
|
|
||||||
if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
|
if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
|
||||||
printk(BIOS_WARNING, "IO APIC not responding.\n");
|
printk(BIOS_WARNING, "IOAPIC not responding.\n");
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
@ -70,25 +70,25 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id)
|
||||||
u32 low, high;
|
u32 low, high;
|
||||||
u32 i, ioapic_interrupts;
|
u32 i, ioapic_interrupts;
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "IOAPIC: Initializing IOAPIC at 0x%08x\n", ioapic_base);
|
printk(BIOS_DEBUG, "IOAPIC: Initializing IOAPIC at 0x%08x\n",
|
||||||
printk(BIOS_DEBUG, "IOAPIC: Bootstrap Processor Local APIC = %02x\n",
|
ioapic_base);
|
||||||
bsp_lapicid);
|
printk(BIOS_DEBUG, "IOAPIC: Bootstrap Processor Local APIC = 0x%02x\n",
|
||||||
|
bsp_lapicid);
|
||||||
|
|
||||||
if (ioapic_id) {
|
if (ioapic_id) {
|
||||||
printk(BIOS_DEBUG, "IOAPIC: ID = 0x%02x\n", ioapic_id);
|
printk(BIOS_DEBUG, "IOAPIC: ID = 0x%02x\n", ioapic_id);
|
||||||
/* Set IOAPIC ID if it has been specified */
|
/* Set IOAPIC ID if it has been specified. */
|
||||||
io_apic_write(ioapic_base, 0x00,
|
io_apic_write(ioapic_base, 0x00,
|
||||||
(io_apic_read(ioapic_base, 0x00) & 0xfff0ffff) |
|
(io_apic_read(ioapic_base, 0x00) & 0xfff0ffff) |
|
||||||
(ioapic_id << 24));
|
(ioapic_id << 24));
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Read the available number of interrupts */
|
/* Read the available number of interrupts. */
|
||||||
ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff;
|
ioapic_interrupts = (io_apic_read(ioapic_base, 0x01) >> 16) & 0xff;
|
||||||
if (!ioapic_interrupts || ioapic_interrupts == 0xff)
|
if (!ioapic_interrupts || ioapic_interrupts == 0xff)
|
||||||
ioapic_interrupts = 24;
|
ioapic_interrupts = 24;
|
||||||
printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts);
|
printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts);
|
||||||
|
|
||||||
|
|
||||||
// XXX this decision should probably be made elsewhere, and
|
// XXX this decision should probably be made elsewhere, and
|
||||||
// it's the C3, not the EPIA this depends on.
|
// it's the C3, not the EPIA this depends on.
|
||||||
#if defined(CONFIG_EPIA_VT8237R_INIT) && CONFIG_EPIA_VT8237R_INIT
|
#if defined(CONFIG_EPIA_VT8237R_INIT) && CONFIG_EPIA_VT8237R_INIT
|
||||||
|
@ -98,18 +98,20 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef IOAPIC_INTERRUPTS_ON_FSB
|
#ifdef IOAPIC_INTERRUPTS_ON_FSB
|
||||||
/* For the Pentium 4 and above APICs deliver their interrupts
|
/*
|
||||||
|
* For the Pentium 4 and above APICs deliver their interrupts
|
||||||
* on the front side bus, enable that.
|
* on the front side bus, enable that.
|
||||||
*/
|
*/
|
||||||
printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on FSB\n");
|
printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on FSB\n");
|
||||||
io_apic_write(ioapic_base, 0x03, io_apic_read(ioapic_base, 0x03) | (1 << 0));
|
io_apic_write(ioapic_base, 0x03,
|
||||||
|
io_apic_read(ioapic_base, 0x03) | (1 << 0));
|
||||||
#endif
|
#endif
|
||||||
#ifdef IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS
|
#ifdef IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS
|
||||||
printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on APIC serial bus\n");
|
printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on APIC serial bus\n");
|
||||||
io_apic_write(ioapic_base, 0x03, 0);
|
io_apic_write(ioapic_base, 0x03, 0);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* Enable Virtual Wire Mode */
|
/* Enable Virtual Wire Mode. */
|
||||||
low = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
|
low = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
|
||||||
high = bsp_lapicid << (56 - 32);
|
high = bsp_lapicid << (56 - 32);
|
||||||
|
|
||||||
|
@ -117,11 +119,12 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id)
|
||||||
io_apic_write(ioapic_base, 0x11, high);
|
io_apic_write(ioapic_base, 0x11, high);
|
||||||
|
|
||||||
if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
|
if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
|
||||||
printk(BIOS_WARNING, "IO APIC not responding.\n");
|
printk(BIOS_WARNING, "IOAPIC not responding.\n");
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0, high, low);
|
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n",
|
||||||
|
0, high, low);
|
||||||
|
|
||||||
low = DISABLED;
|
low = DISABLED;
|
||||||
high = NONE;
|
high = NONE;
|
||||||
|
@ -130,6 +133,7 @@ void setup_ioapic(u32 ioapic_base, u8 ioapic_id)
|
||||||
io_apic_write(ioapic_base, i * 2 + 0x10, low);
|
io_apic_write(ioapic_base, i * 2 + 0x10, low);
|
||||||
io_apic_write(ioapic_base, i * 2 + 0x11, high);
|
io_apic_write(ioapic_base, i * 2 + 0x11, high);
|
||||||
|
|
||||||
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low);
|
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n",
|
||||||
|
i, high, low);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
Loading…
Reference in New Issue