oops.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1672 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/pc80/i8259.c

@@ -0,0 +1,44 @@
+
+
+
+#include <arch/io.h>
+/* code taken from: 
+!
+!	setup.S		Copyright (C) 1991, 1992 Linus Torvalds
+!
+! setup.s is responsible for getting the system data from the BIOS,
+! and putting them into the appropriate places in system memory.
+! both setup.s and system has been loaded by the bootblock.
+ */
+/* we're getting screwed again and again by this problem of the 8259. 
+ * so we're going to leave this lying around for inclusion into 
+ * crt0.S on an as-needed basis. 
+! well, that went ok, I hope. Now we have to reprogram the interrupts :-(
+! we put them right after the intel-reserved hardware interrupts, at
+! int 0x20-0x2F. There they won't mess up anything. Sadly IBM really
+! messed this up with the original PC, and they haven't been able to
+! rectify it afterwards. Thus the bios puts interrupts at 0x08-0x0f,
+! which is used for the internal hardware interrupts as well. We just
+! have to reprogram the 8259's, and it isn't fun.
+ */
+
+void setup_i8259(void)
+{
+	outb(0x11, 0x20);		/*! initialization sequence to 8259A-1*/
+	outb(0x11, 0xA0);		/*! and to 8259A-2*/
+	outb(0x20, 0x21);		/*! start of hardware int's (0x20)*/
+	outb(0x28, 0xA1);		/*! start of hardware int's 2 (0x28)*/
+	outb(0x04, 0x21);		/*! 8259-1 is master*/
+	outb(0x02, 0xA1);		/*! 8259-2 is slave*/
+	outb(0x01, 0x21);		/*! 8086 mode for both*/
+	outb(0x01, 0xA1);		
+	outb(0xFF, 0xA1);		/*! mask off all interrupts for now*/
+	outb(0xFB, 0x21);		/*! mask all irq's but irq2 which is cascaded*/
+}
+
+/*
+ * I like the way Linus says it: 
+! Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
+! need no steenking BIOS anyway (except for the initial loading :-).
+*/
+