git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1672 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich 2004-10-14 22:44:26 +00:00
parent 119e00e2e1
commit e5ac2959bb
1 changed files with 44 additions and 0 deletions

44
src/pc80/i8259.c Normal file
View File

@ -0,0 +1,44 @@
#include <arch/io.h>
/* code taken from:
!
! setup.S Copyright (C) 1991, 1992 Linus Torvalds
!
! setup.s is responsible for getting the system data from the BIOS,
! and putting them into the appropriate places in system memory.
! both setup.s and system has been loaded by the bootblock.
*/
/* we're getting screwed again and again by this problem of the 8259.
* so we're going to leave this lying around for inclusion into
* crt0.S on an as-needed basis.
! well, that went ok, I hope. Now we have to reprogram the interrupts :-(
! we put them right after the intel-reserved hardware interrupts, at
! int 0x20-0x2F. There they won't mess up anything. Sadly IBM really
! messed this up with the original PC, and they haven't been able to
! rectify it afterwards. Thus the bios puts interrupts at 0x08-0x0f,
! which is used for the internal hardware interrupts as well. We just
! have to reprogram the 8259's, and it isn't fun.
*/
void setup_i8259(void)
{
outb(0x11, 0x20); /*! initialization sequence to 8259A-1*/
outb(0x11, 0xA0); /*! and to 8259A-2*/
outb(0x20, 0x21); /*! start of hardware int's (0x20)*/
outb(0x28, 0xA1); /*! start of hardware int's 2 (0x28)*/
outb(0x04, 0x21); /*! 8259-1 is master*/
outb(0x02, 0xA1); /*! 8259-2 is slave*/
outb(0x01, 0x21); /*! 8086 mode for both*/
outb(0x01, 0xA1);
outb(0xFF, 0xA1); /*! mask off all interrupts for now*/
outb(0xFB, 0x21); /*! mask all irq's but irq2 which is cascaded*/
}
/*
* I like the way Linus says it:
! Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
! need no steenking BIOS anyway (except for the initial loading :-).
*/