mb/google/brya: Update devicetree setting for lisbon
update devicetree setting per the schematic BUG=b:246657849 TEST=emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I4268a5b43690a22bb703337fed84b83c45da4ad2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This commit is contained in:
parent
1be4bbc57a
commit
e63049fc15
|
@ -1,6 +1,311 @@
|
||||||
|
fw_config
|
||||||
|
field AUDIO 0 2
|
||||||
|
option AUDIO_UNKNOWN 0
|
||||||
|
option ALC5682IVS_I2S 1
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
chip soc/intel/alderlake
|
chip soc/intel/alderlake
|
||||||
|
# Intel Common SoC Config
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
#| Field | Value |
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
#| GSPI1 | NC |
|
||||||
|
#| I2C0 | Audio |
|
||||||
|
#| I2C1 | cr50 TPM. Early init is |
|
||||||
|
#| | required to set up a BAR |
|
||||||
|
#| | for TPM communication |
|
||||||
|
#| I2C3 | NC |
|
||||||
|
#| I2C5 | NC |
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
register "common_soc_config" = "{
|
||||||
|
.i2c[0] = {
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
.rise_time_ns = 650,
|
||||||
|
.fall_time_ns = 400,
|
||||||
|
.data_hold_time_ns = 50,
|
||||||
|
},
|
||||||
|
.i2c[1] = {
|
||||||
|
.early_init = 1,
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
.rise_time_ns = 600,
|
||||||
|
.fall_time_ns = 400,
|
||||||
|
.data_hold_time_ns = 50,
|
||||||
|
},
|
||||||
|
}"
|
||||||
|
|
||||||
|
register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2 Port 1
|
||||||
|
register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Disable USB2 Port 2
|
||||||
|
register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Disable USB2 Port 3
|
||||||
|
register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Disable USB2 Port 4
|
||||||
|
|
||||||
|
register "usb3_ports[0]" = "{
|
||||||
|
.enable = 1,
|
||||||
|
.ocpin = OC_SKIP,
|
||||||
|
.tx_de_emp = 0x2B,
|
||||||
|
.tx_downscale_amp = 0x00,
|
||||||
|
}" # Type-A port A0
|
||||||
|
|
||||||
|
register "serial_io_gspi_mode" = "{
|
||||||
|
[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
|
||||||
|
[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
|
||||||
|
}"
|
||||||
|
|
||||||
|
register "ddi_ports_config" = "{
|
||||||
|
[DDI_PORT_A] = DDI_ENABLE_HPD,
|
||||||
|
[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
|
||||||
|
[DDI_PORT_1] = DDI_ENABLE_HPD,
|
||||||
|
[DDI_PORT_3] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
|
||||||
|
}"
|
||||||
|
|
||||||
device domain 0 on
|
device domain 0 on
|
||||||
end
|
device ref dtt on
|
||||||
|
chip drivers/intel/dptf
|
||||||
|
## sensor information
|
||||||
|
register "options.tsr[0].desc" = ""DRAM""
|
||||||
|
register "options.tsr[1].desc" = ""Charger""
|
||||||
|
|
||||||
|
# TODO: below values are initial reference values only
|
||||||
|
## Active Policy
|
||||||
|
register "policies.active" = "{
|
||||||
|
[0] = {
|
||||||
|
.target = DPTF_CPU,
|
||||||
|
.thresholds = {
|
||||||
|
TEMP_PCT(85, 90),
|
||||||
|
TEMP_PCT(80, 80),
|
||||||
|
TEMP_PCT(75, 70),
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}"
|
||||||
|
|
||||||
|
## Passive Policy
|
||||||
|
register "policies.passive" = "{
|
||||||
|
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
|
||||||
|
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
|
||||||
|
[2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000),
|
||||||
|
}"
|
||||||
|
|
||||||
|
## Critical Policy
|
||||||
|
register "policies.critical" = "{
|
||||||
|
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||||
|
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||||
|
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||||
|
}"
|
||||||
|
|
||||||
|
register "controls.power_limits" = "{
|
||||||
|
.pl1 = {
|
||||||
|
.min_power = 3000,
|
||||||
|
.max_power = 15000,
|
||||||
|
.time_window_min = 28 * MSECS_PER_SEC,
|
||||||
|
.time_window_max = 32 * MSECS_PER_SEC,
|
||||||
|
.granularity = 200,
|
||||||
|
},
|
||||||
|
.pl2 = {
|
||||||
|
.min_power = 55000,
|
||||||
|
.max_power = 55000,
|
||||||
|
.time_window_min = 28 * MSECS_PER_SEC,
|
||||||
|
.time_window_max = 32 * MSECS_PER_SEC,
|
||||||
|
.granularity = 1000,
|
||||||
|
}
|
||||||
|
}"
|
||||||
|
|
||||||
|
## Charger Performance Control (Control, mA)
|
||||||
|
register "controls.charger_perf" = "{
|
||||||
|
[0] = { 255, 1700 },
|
||||||
|
[1] = { 24, 1500 },
|
||||||
|
[2] = { 16, 1000 },
|
||||||
|
[3] = { 8, 500 }
|
||||||
|
}"
|
||||||
|
|
||||||
|
## Fan Performance Control (Percent, Speed, Noise, Power)
|
||||||
|
register "controls.fan_perf" = "{
|
||||||
|
[0] = { 90, 6700, 220, 2200, },
|
||||||
|
[1] = { 80, 5800, 180, 1800, },
|
||||||
|
[2] = { 70, 5000, 145, 1450, },
|
||||||
|
[3] = { 60, 4900, 115, 1150, },
|
||||||
|
[4] = { 50, 3838, 90, 900, },
|
||||||
|
[5] = { 40, 2904, 55, 550, },
|
||||||
|
[6] = { 30, 2337, 30, 300, },
|
||||||
|
[7] = { 20, 1608, 15, 150, },
|
||||||
|
[8] = { 10, 800, 10, 100, },
|
||||||
|
[9] = { 0, 0, 0, 50, }
|
||||||
|
}"
|
||||||
|
|
||||||
|
## Fan options
|
||||||
|
register "options.fan.fine_grained_control" = "1"
|
||||||
|
register "options.fan.step_size" = "2"
|
||||||
|
|
||||||
|
device generic 0 alias dptf_policy on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pcie4_0 on
|
||||||
|
# Enable CPU PCIE RP 1 using CLK 0
|
||||||
|
register "cpu_pcie_rp[CPU_RP(1)]" = "{
|
||||||
|
.clk_req = 0,
|
||||||
|
.clk_src = 0,
|
||||||
|
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||||
|
}"
|
||||||
|
end
|
||||||
|
device ref tcss_dma0 on
|
||||||
|
chip drivers/intel/usb4/retimer
|
||||||
|
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||||
|
use tcss_usb3_port1 as dfp[0].typec_port
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref cnvi_wifi on
|
||||||
|
chip drivers/wifi/generic
|
||||||
|
register "wake" = "GPE0_PME_B0"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c0 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""RTL5682""
|
||||||
|
register "name" = ""RT58""
|
||||||
|
register "desc" = ""Headset Codec""
|
||||||
|
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||||
|
# Set the jd_src to RT5668_JD1 for jack detection
|
||||||
|
register "property_count" = "1"
|
||||||
|
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||||
|
register "property_list[0].name" = ""realtek,jd-src""
|
||||||
|
register "property_list[0].integer" = "1"
|
||||||
|
device i2c 1a on
|
||||||
|
probe AUDIO ALC5682IVS_I2S
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end #I2C0
|
||||||
|
device ref i2c1 on
|
||||||
|
chip drivers/i2c/tpm
|
||||||
|
register "hid" = ""GOOG0005""
|
||||||
|
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
|
||||||
|
device i2c 50 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pcie_rp7 on
|
||||||
|
chip drivers/net
|
||||||
|
register "wake" = "GPE0_DW0_07"
|
||||||
|
register "led_feature" = "0xe0"
|
||||||
|
register "customized_led0" = "0x23f"
|
||||||
|
register "customized_led2" = "0x028"
|
||||||
|
register "enable_aspm_l1_2" = "1"
|
||||||
|
device pci 00.0 on end
|
||||||
|
end
|
||||||
|
end # RTL8111 Ethernet NIC
|
||||||
|
device ref pcie_rp8 on
|
||||||
|
chip soc/intel/common/block/pcie/rtd3
|
||||||
|
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
|
||||||
|
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
|
||||||
|
register "srcclk_pin" = "3"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end #PCIE8 SD card
|
||||||
|
device ref gspi1 off end
|
||||||
|
device ref pch_espi on
|
||||||
|
chip ec/google/chromeec
|
||||||
|
use conn0 as mux_conn[0]
|
||||||
|
device pnp 0c09.0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pmc hidden
|
||||||
|
chip drivers/intel/pmc_mux
|
||||||
|
device generic 0 on
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
use usb2_port1 as usb2_port
|
||||||
|
use tcss_usb3_port1 as usb3_port
|
||||||
|
device generic 0 alias conn0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref tcss_xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref tcss_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))"
|
||||||
|
device ref tcss_usb3_port1 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref xhci_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))"
|
||||||
|
device ref usb2_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A3 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(5, 1))"
|
||||||
|
device ref usb2_port6 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A2 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(6, 1))"
|
||||||
|
device ref usb2_port7 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A1 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(4, 1))"
|
||||||
|
device ref usb2_port8 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||||
|
device ref usb2_port9 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Bluetooth""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
register "reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||||
|
device ref usb2_port10 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||||
|
device ref usb3_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A1 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(4, 1))"
|
||||||
|
device ref usb3_port2 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A2 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(6, 1))"
|
||||||
|
device ref usb3_port3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port A3 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(5, 1))"
|
||||||
|
device ref usb3_port4 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
end
|
end
|
||||||
|
|
Loading…
Reference in New Issue