Replace ramtest pattern to assist in DIMM configuration
This is developer's testtool. Output from a "rotate ones" -style pattern helps figure out how DIMM addresses are encoded or routed on a certain mainboard. Scattered test should cover every data and address lines on the memory bus, but is probably limited to the first bank of first DIMM. Change-Id: I533a7a873bcc434f99e7faed9dc9337d9ab64196 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> [pg: rebase] Reviewed-on: http://review.coreboot.org/294 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
This commit is contained in:
Kyösti Mälkki
Rudolf Marek
parent
8a85bccd84
commit
e77b9a0ab7
|
|
@ -47,100 +47,114 @@ static void phys_memory_barrier(void)
|
|||
#endif
|
||||
}
|
||||
|
||||
static void ram_fill(unsigned long start, unsigned long stop)
|
||||
{
|
||||
unsigned long addr;
|
||||
/*
|
||||
* Fill.
|
||||
/**
|
||||
* Rotate ones test pattern that access every bit on a 128bit wide
|
||||
* memory bus. To test most address lines, addresses are scattered
|
||||
* using 256B, 4kB and 64kB increments.
|
||||
*
|
||||
* @idx Index to test pattern (0=<idx<0x400)
|
||||
* @addr Memory to access on @idx
|
||||
* @value Value to write or read at @addr
|
||||
*/
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "DRAM fill: 0x%08lx-0x%08lx\n", start, stop);
|
||||
#else
|
||||
print_debug("DRAM fill: ");
|
||||
print_debug_hex32(start);
|
||||
print_debug("-");
|
||||
print_debug_hex32(stop);
|
||||
print_debug("\n");
|
||||
#endif
|
||||
for(addr = start; addr < stop ; addr += 4) {
|
||||
/* Display address being filled */
|
||||
if (!(addr & 0xfffff)) {
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "%08lx \r", addr);
|
||||
#else
|
||||
print_debug_hex32(addr);
|
||||
print_debug(" \r");
|
||||
#endif
|
||||
}
|
||||
write_phys(addr, (u32)addr);
|
||||
};
|
||||
/* Display final address */
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "%08lx\nDRAM filled\n", addr);
|
||||
#else
|
||||
print_debug_hex32(addr);
|
||||
print_debug("\nDRAM filled\n");
|
||||
#endif
|
||||
static inline void test_pattern(unsigned short int idx,
|
||||
unsigned long *addr, unsigned long *value)
|
||||
{
|
||||
uint8_t j, k;
|
||||
|
||||
k = (idx >> 8) + 1;
|
||||
j = (idx >> 4) & 0x0f;
|
||||
*addr = idx & 0x0f;
|
||||
*addr |= j << (4*k);
|
||||
*value = 0x01010101 << (j & 7);
|
||||
if (j & 8)
|
||||
*value = ~(*value);
|
||||
}
|
||||
|
||||
static int ram_verify_nodie(unsigned long start, unsigned long stop)
|
||||
{
|
||||
unsigned long addr;
|
||||
int i = 0;
|
||||
/*
|
||||
* Verify.
|
||||
/**
|
||||
* Simple write-read-verify memory test. See console debug output for
|
||||
* any dislocated bytes.
|
||||
*
|
||||
* @start System memory offset, aligned to 128bytes
|
||||
*/
|
||||
static int ram_bitset_nodie(unsigned long start)
|
||||
{
|
||||
unsigned long addr, value, value2;
|
||||
unsigned short int idx;
|
||||
unsigned char failed, failures;
|
||||
uint8_t verbose = 0;
|
||||
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "DRAM verify: 0x%08lx-0x%08lx\n", start, stop);
|
||||
printk(BIOS_DEBUG, "DRAM bitset write: 0x%08lx\n", start);
|
||||
#else
|
||||
print_debug("DRAM verify: ");
|
||||
print_debug("DRAM bitset write: 0x");
|
||||
print_debug_hex32(start);
|
||||
print_debug_char('-');
|
||||
print_debug_hex32(stop);
|
||||
print_debug("\n");
|
||||
#endif
|
||||
for(addr = start; addr < stop ; addr += 4) {
|
||||
unsigned long value;
|
||||
/* Display address being tested */
|
||||
if (!(addr & 0xfffff)) {
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "%08lx \r", addr);
|
||||
#else
|
||||
print_debug_hex32(addr);
|
||||
print_debug(" \r");
|
||||
#endif
|
||||
for (idx=0; idx<0x400; idx+=4) {
|
||||
test_pattern(idx, &addr, &value);
|
||||
write_phys(start + addr, value);
|
||||
}
|
||||
value = read_phys(addr);
|
||||
if (value != addr) {
|
||||
/* Display address with error */
|
||||
|
||||
/* Make sure we don't read before we wrote */
|
||||
phys_memory_barrier();
|
||||
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_ERR, "Fail: @0x%08lx Read value=0x%08lx\n", addr, value);
|
||||
printk(BIOS_DEBUG, "DRAM bitset verify: 0x%08lx\n", start);
|
||||
#else
|
||||
print_err("Fail: @0x");
|
||||
print_err_hex32(addr);
|
||||
print_err(" Read value=0x");
|
||||
print_debug("DRAM bitset verify: 0x");
|
||||
print_debug_hex32(start);
|
||||
print_debug("\n");
|
||||
#endif
|
||||
failures = 0;
|
||||
for (idx=0; idx<0x400; idx+=4) {
|
||||
test_pattern(idx, &addr, &value);
|
||||
value2 = read_phys(start + addr);
|
||||
|
||||
failed = (value2 != value);
|
||||
failures |= failed;
|
||||
if (failed && !verbose) {
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_ERR, "0x%08lx wr: 0x%08lx rd: 0x%08lx FAIL\n",
|
||||
start + addr, value, value2);
|
||||
#else
|
||||
print_err_hex32(start + addr);
|
||||
print_err(" wr: 0x");
|
||||
print_err_hex32(value);
|
||||
print_err("\n");
|
||||
print_err(" rd: 0x");
|
||||
print_err_hex32(value2);
|
||||
print_err(" FAIL\n");
|
||||
#endif
|
||||
i++;
|
||||
if(i>256) {
|
||||
}
|
||||
if (verbose) {
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "Aborting.\n");
|
||||
if ((addr & 0x0f) == 0)
|
||||
printk(BIOS_DEBUG, "%08lx wr: %08lx rd:",
|
||||
start + addr, value);
|
||||
if (failed)
|
||||
printk(BIOS_DEBUG, " %08lx!", value2);
|
||||
else
|
||||
printk(BIOS_DEBUG, " %08lx ", value2);
|
||||
if ((addr & 0x0f) == 0xc)
|
||||
printk(BIOS_DEBUG, "\n");
|
||||
#else
|
||||
print_debug("Aborting.\n");
|
||||
if ((addr & 0x0f) == 0) {
|
||||
print_dbg_hex32(start + addr);
|
||||
print_dbg(" wr: ");
|
||||
print_dbg_hex32(value);
|
||||
print_dbg(" rd: ");
|
||||
}
|
||||
print_dbg_hex32(value2);
|
||||
if (failed)
|
||||
print_dbg("! ");
|
||||
else
|
||||
print_dbg(" ");
|
||||
if ((addr & 0x0f) == 0xc)
|
||||
print_dbg("\n");
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Display final address */
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "%08lx", addr);
|
||||
#else
|
||||
print_debug_hex32(addr);
|
||||
#endif
|
||||
|
||||
if (i) {
|
||||
if (failures) {
|
||||
post_code(0xea);
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "\nDRAM did _NOT_ verify!\n");
|
||||
#else
|
||||
|
|
@ -168,18 +182,13 @@ void ram_check(unsigned long start, unsigned long stop)
|
|||
* are tested. -Tyson
|
||||
*/
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "Testing DRAM : %08lx - %08lx\n", start, stop);
|
||||
printk(BIOS_DEBUG, "Testing DRAM at: %08lx\n", start);
|
||||
#else
|
||||
print_debug("Testing DRAM : ");
|
||||
print_debug("Testing DRAM at: ");
|
||||
print_debug_hex32(start);
|
||||
print_debug("-");
|
||||
print_debug_hex32(stop);
|
||||
print_debug("\n");
|
||||
#endif
|
||||
ram_fill(start, stop);
|
||||
/* Make sure we don't read before we wrote */
|
||||
phys_memory_barrier();
|
||||
if (ram_verify_nodie(start, stop))
|
||||
if (ram_bitset_nodie(start))
|
||||
die("DRAM ERROR");
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "Done.\n");
|
||||
|
|
@ -198,19 +207,14 @@ int ram_check_nodie(unsigned long start, unsigned long stop)
|
|||
* are tested. -Tyson
|
||||
*/
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "Testing DRAM : %08lx - %08lx\n", start, stop);
|
||||
printk(BIOS_DEBUG, "Testing DRAM at : %08lx\n", start);
|
||||
#else
|
||||
print_debug("Testing DRAM : ");
|
||||
print_debug("Testing DRAM at : ");
|
||||
print_debug_hex32(start);
|
||||
print_debug("-");
|
||||
print_debug_hex32(stop);
|
||||
print_debug("\n");
|
||||
#endif
|
||||
ram_fill(start, stop);
|
||||
/* Make sure we don't read before we wrote */
|
||||
phys_memory_barrier();
|
||||
ret = ram_verify_nodie(start, stop);
|
||||
|
||||
ret = ram_bitset_nodie(start);
|
||||
#if !defined(__ROMCC__)
|
||||
printk(BIOS_DEBUG, "Done.\n");
|
||||
#else
|
||||
|
|
@ -248,4 +252,3 @@ void quick_ram_check(void)
|
|||
}
|
||||
phys_memory_barrier();
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue