GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

drivers/usb/gadget.c: Use 'printk()' instead of 'dprintk()' 

dprintk(BIOS_,...) was probably useed for debug print, so use
printk(BIOS_, ...) instead.

Change-Id: Ia4171c8b4b42f6b0c1c9c0438bab2eef73f8c416
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This commit is contained in:
Elyes HAOUAS 2022-01-26 14:33:47 +01:00 committed by Felix Held
parent 3ae95b2630
commit e7b96c32c1
1 changed files with 18 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
src/drivers/usb/gadget.c
View File

@ -8,8 +8,6 @@
#include "usb_ch9.h"
#include "ehci.h"
#define dprintk printk
#define USB_HUB_PORT_CONNECTION 0
#define USB_HUB_PORT_ENABLED 1
#define USB_HUB_PORT_RESET 4
@ -144,13 +142,13 @@ debug_dev_retry:
if (dbgp_desc.bLength == sizeof(dbgp_desc) && dbgp_desc.bDescriptorType == USB_DT_DEBUG)
goto debug_dev_found;
else
dprintk(BIOS_INFO, "Invalid debug device descriptor.\n");
printk(BIOS_INFO, "Invalid debug device descriptor.\n");
}
if (devnum == 0) {
devnum = USB_DEBUG_DEVNUM;
goto debug_dev_retry;
} else {
dprintk(BIOS_INFO, "Could not find attached debug device.\n");
printk(BIOS_INFO, "Could not find attached debug device.\n");
return -1;
}
debug_dev_found:
@ -161,12 +159,12 @@ debug_dev_found:
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "Could not move attached device to %d.\n",
printk(BIOS_INFO, "Could not move attached device to %d.\n",
USB_DEBUG_DEVNUM);
return -2;
}
devnum = USB_DEBUG_DEVNUM;
dprintk(BIOS_INFO, "EHCI debug device renamed to 127.\n");
printk(BIOS_INFO, "EHCI debug device renamed to 127.\n");
}
/* Enable the debug interface */
@ -174,10 +172,10 @@ debug_dev_found:
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "Could not enable EHCI debug device.\n");
printk(BIOS_INFO, "Could not enable EHCI debug device.\n");
return -3;
}
dprintk(BIOS_INFO, "EHCI debug interface enabled.\n");
printk(BIOS_INFO, "EHCI debug interface enabled.\n");
pipe[DBGP_CONSOLE_EPOUT].endpoint = dbgp_desc.bDebugOutEndpoint;
pipe[DBGP_CONSOLE_EPIN].endpoint = dbgp_desc.bDebugInEndpoint;
@ -189,7 +187,7 @@ debug_dev_found:
small_write:
ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n",5);
if (ret < 0) {
dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
printk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
if (!configured) {
/* Send Set Configure request to device. This is required for FX2
(CY7C68013) to transfer from USB state Addressed to Configured,
@ -203,7 +201,7 @@ small_write:
}
return -4;
}
dprintk(BIOS_INFO, "Test write done\n");
printk(BIOS_INFO, "Test write done\n");
return 0;
}
@ -251,19 +249,19 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "Could not move attached device to %d.\n",
printk(BIOS_INFO, "Could not move attached device to %d.\n",
USB_DEBUG_DEVNUM);
return -2;
}
devnum = USB_DEBUG_DEVNUM;
dprintk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum);
printk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum);
/* Send Set Configure request to device. */
ret = dbgp_control_msg(ehci_debug, devnum,
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "FTDI set configuration failed.\n");
printk(BIOS_INFO, "FTDI set configuration failed.\n");
return -2;
}
@ -271,7 +269,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
FTDI_SIO_SET_BITMODE_REQUEST, 0, uart_if, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "FTDI SET_BITMODE failed.\n");
printk(BIOS_INFO, "FTDI SET_BITMODE failed.\n");
return -3;
}
ft232h_baud(&baud_value, &baud_index,
@ -281,7 +279,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
FTDI_SIO_SET_BAUDRATE_REQUEST,
baud_value, baud_index | uart_if, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n");
printk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n");
return -3;
}
ret = dbgp_control_msg(ehci_debug, devnum,
@ -289,7 +287,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
FTDI_SIO_SET_DATA_REQUEST,
0x0008, uart_if, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "FTDI SET_DATA failed.\n");
printk(BIOS_INFO, "FTDI SET_DATA failed.\n");
return -3;
}
ret = dbgp_control_msg(ehci_debug, devnum,
@ -297,7 +295,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
0x0000, uart_if, NULL, 0);
if (ret < 0) {
dprintk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n");
printk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n");
return -3;
}
@ -309,10 +307,10 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
/* Perform a small write. */
ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n", 5);
if (ret < 0) {
dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
printk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
return -4;
}
dprintk(BIOS_INFO, "Test write done\n");
printk(BIOS_INFO, "Test write done\n");
return 0;
}
@ -335,7 +333,7 @@ int dbgp_probe_gadget(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe)
ret = probe_for_debug_descriptor(ehci_debug, pipe);
}
if (ret < 0) {
dprintk(BIOS_INFO, "Could not enable debug dongle.\n");
printk(BIOS_INFO, "Could not enable debug dongle.\n");
return ret;
}