mb/google/corsola: Fix MIPI panel power on/off sequence

Based on the power sequence of the panel [1] and PMIC datasheet [2],
the power on T2 sequence VSP to VSN should be large than 1ms, but it's
-159us now, and the power off T2 sequence VSP to VSN should be large
than 0ms, but it's less than 0 now. Let's modify the power sequence
to meet the datasheet requirement.

[1] HX83102-J02_Datasheet_v03.pdf
[2] TPS65132-Single-Inductor-Dual-Output-Power-Supply.pdf

BUG=b:282902297
TEST=power sequence T2 pass

Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ib1625c6a211f849071393f69eaf5c649a8e7f72e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75298
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/google/corsola/display.c

@@ -1,17 +1,13 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
-#include <assert.h>
 #include <boardid.h>
 #include <cbfs.h>
 #include <console/console.h>
-#include <delay.h>
-#include <device/i2c_simple.h>
 #include <edid.h>
 #include <gpio.h>
 #include <soc/ddp.h>
 #include <soc/dsi.h>
 #include <soc/gpio_common.h>
-#include <soc/i2c.h>
 #include <soc/mtcmos.h>
 
 #include "display.h"
@@ -25,67 +21,6 @@ static void backlight_control(void)
 	gpio_output(GPIO_EN_PP3300_DISP_X, 1);
 }
 
-int panel_pmic_reg_mask(unsigned int bus, uint8_t chip, uint8_t addr,
-			uint8_t val, uint8_t mask)
-{
-	uint8_t msg = 0;
-
-	if (i2c_read_field(bus, chip, addr, &msg, 0xFF, 0) < 0) {
-		printk(BIOS_ERR, "%s: Failed to read i2c(%u): addr(%u)\n",
-			__func__, bus, addr);
-		return -1;
-	}
-
-	msg &= ~mask;
-	msg |= val;
-
-	return i2c_write_field(bus, chip, addr, msg, 0xFF, 0);
-}
-
-void tps65132s_program_eeprom(void)
-{
-	u8 value = 0;
-	u8 value1 = 0;
-
-	/* Initialize I2C6 for PMIC TPS65132 */
-	mtk_i2c_bus_init(PMIC_TPS65132_I2C, I2C_SPEED_FAST);
-	mdelay(10);
-
-	/* EN_PP6000_MIPI_DISP */
-	gpio_output(GPIO_EN_PP3300_DISP_X, 1);
-	/* EN_PP6000_MIPI_DISP_150MA */
-	gpio_output(GPIO_EN_PP3300_SDBRDG_X, 1);
-	mdelay(10);
-
-	i2c_read_field(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x00, &value, 0xFF, 0);
-	i2c_read_field(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x01, &value1, 0xFF, 0);
-
-	if (value != 0x14 || value1 != 0x14) {
-		printk(BIOS_INFO, "Set AVDD AVEE 6.0V to EEPROM Data in first time\n");
-
-		/* Set AVDD = 6.0V */
-		if (panel_pmic_reg_mask(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x00, 0x14,
-					0x1F) < 0)
-			return;
-
-		/* Set AVEE = -6.0V */
-		if (panel_pmic_reg_mask(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x01, 0x14,
-					0x1F) < 0)
-			return;
-
-		/* Set EEPROM Data */
-		if (panel_pmic_reg_mask(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0xFF, 0x80,
-					0xFC) < 0)
-			return;
-		mdelay(50);
-	}
-	/* EN_PP6000_MIPI_DISP */
-	gpio_output(GPIO_EN_PP3300_DISP_X, 0);
-	/* EN_PP6000_MIPI_DISP_150MA */
-	gpio_output(GPIO_EN_PP3300_SDBRDG_X, 0);
-	mdelay(5);
-}
-
 struct panel_description *get_panel_from_cbfs(struct panel_description *desc)
 {
 	char cbfs_name[64];

src/mainboard/google/corsola/display.h

@@ -9,7 +9,6 @@
 
 #define BRIDGE_I2C		I2C0
 #define PMIC_TPS65132_I2C	I2C6
-#define PMIC_TPS65132_SLAVE	0x3E
 
 struct panel_description {
 	void (*power_on)(void);	/* Callback to turn on panel */
@@ -34,7 +33,4 @@ struct panel_description *get_ps8640_description(void);
 /* Load panel serializable data from CBFS */
 struct panel_description *get_panel_from_cbfs(struct panel_description *desc);
 
-void tps65132s_program_eeprom(void);
-int panel_pmic_reg_mask(u32 bus, u8 chip, u8 addr, u8 val, u8 mask);
-
 #endif

src/mainboard/google/corsola/panel_starmie.c

@@ -1,20 +1,34 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
+#include <console/console.h>
 #include <delay.h>
 #include <gpio.h>
 #include <soc/regulator.h>
+#include <soc/tps65132s.h>
 
 #include "display.h"
 #include "gpio.h"
 
 static void mipi_panel_power_on(void)
 {
-	tps65132s_program_eeprom();
+	const struct tps65132s_reg_setting reg_settings[] = {
+		{ PMIC_TPS65132_VPOS, 0x14, 0x1F },
+		{ PMIC_TPS65132_VNEG, 0x14, 0x1F },
+		{ PMIC_TPS65132_DLYX, 0x95, 0xFF },
+		{ PMIC_TPS65132_ASSDD, 0x5b, 0xFF },
+	};
+	const struct tps65132s_cfg cfg = {
+		.i2c_bus = PMIC_TPS65132_I2C,
+		.en = GPIO_EN_PP3300_DISP_X,
+		.sync = GPIO_EN_PP3300_SDBRDG_X,
+		.settings = reg_settings,
+		.setting_counts = ARRAY_SIZE(reg_settings),
+	};
+
 	mainboard_set_regulator_voltage(MTK_REGULATOR_VIO18, 1800000);
-	mdelay(1);
+	if (tps65132s_setup(&cfg) != CB_SUCCESS)
-	gpio_output(GPIO_EN_PP3300_DISP_X, 1);
+		printk(BIOS_ERR, "Failed to setup tps65132s\n");
-	gpio_output(GPIO_EN_PP3300_SDBRDG_X, 1);
+
-	mdelay(1);
 	/* DISP_RST_1V8_L */
 	gpio_output(GPIO_EDPBRDG_RST_L, 1);
 	mdelay(1);