Documentation/mainboard/facebook/monolith.md: Update to beta status

Update to reflect the beta status of the code.

BUG=N/A
TEST=build

Change-Id: I9d1c42d24578c9420569da7e294d5c723da3c772
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>

Documentation/mainboard/facebook/monolith.md

@@ -3,15 +3,28 @@
 This page describes how to run coreboot on the Facebook Monolith.
 
 Please note: the coreboot implementation for this boards is in its
-Alpha state and isn't fully tested yet.
+Beta state and isn't fully tested yet.
 
 ## Required blobs
 
-This board currently requires:
-fsp blobs	3rdparty/fsp/KabylakeFspBinPkg/Fsp_M.fd
-		3rdparty/fsp/KabylakeFspBinPkg/Fsp_S.fd
+Mainboard is based on the Intel Kaby Lake U SoC.
+Intel company provides [Firmware Support Package (2.0)](../../soc/intel/fsp/index.md)
+(intel FSP 2.0) to initialize this generation silicon. Please see this
+[document](../../soc/intel/code_development_model/code_development_model.md).
 
-Microcode	3rdparty/intel-microcode/intel-ucode
+FSP Information:
+
+```eval_rst
++-----------------------------+-------------------+-------------------+
+| FSP Project Name            | Directory         | Specification     |
++-----------------------------+-------------------+-------------------+
+| 7th Generation Intel® Core™ | KabylakeFspBinPkg | 2.0               |
+| processors  and chipsets    |                   |                   |
+| (formerly Kaby Lake)        |                   |                   |
++-----------------------------+-------------------+-------------------+
+```
+
+Microcode: 3rdparty/intel-microcode/intel-ucode
 
 ## Flash components
 
@@ -75,25 +88,29 @@ solution. Wires need to be connected to be able to flash using an external progr
 ## Untested
 
 - Hardware monitor
-- SDIO
 - Full Embedded Controller support
-- eMMC
 - SATA
+- xDCI
 
 ## Working
 
 - USB
-- Gigabit Ethernet
+- Gigabit Ethernet (i219 and i210)
 - Graphics (Using FSP GOP)
 - flashrom
-- PCIe
+- PCIe including hotplug on FPGA root port
 - EC serial port
+- EC CPU temperature
 - SMBus
 - Initialization with FSP
 - SeaBIOS payload (commit a5cab58e9a3fb6e168aba919c5669bea406573b4)
 - TianoCore payload (commit a5cab58e9a3fb6e168aba919c5669bea406573b4)
+- LinuxBoot (kernel kernel-4_19_97) (uroot commit 9c9db9dbd6b532f5f91a511a0de885c6562aadd7)
+- eMMC
+
+All of the above has been briefly tested by booting Linux from eMMC using the TianoCore payload
+and LinuxBoot.
 
-All of the above has been briefly tested by booting Linux from the TianoCore payload.
 SeaBios has been checked to the extend that it runs to the boot selection and provides display
 output.