diff --git a/Documentation/mainboard/facebook/fbg1701.md b/Documentation/mainboard/facebook/fbg1701.md
old mode 100644
new mode 100755
index 89e8a6abbc..e59627721a
--- a/Documentation/mainboard/facebook/fbg1701.md
+++ b/Documentation/mainboard/facebook/fbg1701.md
@@ -5,16 +5,17 @@ This page describes how to run coreboot on the Facebook FBG1701.
 FBG1701 are assembled with different onboard memory modules:
 	Rev 1.0	Onboard Samsung K4B8G1646D-MYKO memory
 	Rev 1.1 and 1.2	Onboard Micron MT41K512M16HA-125A memory
+	Rev 1.3	Onboard Kingston B5116ECMDXGGB memory
 
-Use make menuconfig to configure `onboard memory manufacturer` in Mainboard
-menu.
+Use make menuconfig to configure `onboard memory manufacturer Samsung` in
+Mainboard menu.
 
 ## Required blobs
 
 This board currently requires:
 fsp blob	3rdparty/fsp/BraswellFspBinPkg/FspBin/BSWFSP.fd
 Microcode	Intel Braswell cpuid 1046C4 version 410
-		(Used pre-build binary retrieved from Intel site)
+		(Used pre-built binary retrieved from Intel site)
 
 ## Flashing coreboot
 
@@ -25,7 +26,7 @@ The main SPI flash can be accessed using [flashrom].
 ### External programming
 
 The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip.
-This chip is located to the top middle side of the board. It's located
+This chip is located on the top middle side of the board. It's located
 between SoC and Q7 connector. Use clip (or solder wires) to program
 the chip.
 Specifically, it's a Winbond W25Q64FW (1.8V), whose datasheet can be found