diff --git a/src/mainboard/google/dedede/variants/beadrix/gpio.c b/src/mainboard/google/dedede/variants/beadrix/gpio.c
index 602864959c..0732355657 100644
--- a/src/mainboard/google/dedede/variants/beadrix/gpio.c
+++ b/src/mainboard/google/dedede/variants/beadrix/gpio.c
@@ -5,9 +5,14 @@
 
 /* Pad configuration in ramstage */
 static const struct pad_config gpio_table[] = {
+	/* A10 : WWAN_EN */
+	PAD_CFG_GPO(GPP_A10, 1, PWROK),
 	/* A11 : TOUCH_RPT_EN ==> NC */
 	PAD_NC(GPP_A11, NONE),
 
+	/* B7  : PCIE_CLKREQ2_N ==> WWAN_SAR_DETECT_ODL */
+	PAD_CFG_GPO(GPP_B7, 1, DEEP),
+
 	/* C18 : AP_I2C_EMR_SDA ==> NC */
 	PAD_NC(GPP_C18, NONE),
 	/* C19 : AP_I2C_EMR_SCL ==> NC */
@@ -15,6 +20,8 @@ static const struct pad_config gpio_table[] = {
 	/* C22 : UART2_RTS_N ==> NC */
 	PAD_NC(GPP_C22, NONE),
 
+	/* D0  : WWAN_HOST_WAKE ==> WWAN_WDISABLE_L */
+	PAD_CFG_GPO(GPP_D0, 1, DEEP),
 	/* D12 : WCAM_RST_L ==> NC */
 	PAD_NC(GPP_D12, NONE),
 	/* D13 : EN_PP2800_CAMERA ==> NC */
@@ -58,6 +65,8 @@ static const struct pad_config gpio_table[] = {
 
 	/* H1  : EN_PP3300_SD_U ==> NC */
 	PAD_NC(GPP_H1, NONE),
+	/* H17 : WWAN_RST_L */
+	PAD_CFG_GPO(GPP_H17, 0, PLTRST),
 };
 
 const struct pad_config *variant_override_gpio_table(size_t *num)
diff --git a/src/mainboard/google/dedede/variants/beadrix/overridetree.cb b/src/mainboard/google/dedede/variants/beadrix/overridetree.cb
index 97e7743908..9c6d931f22 100644
--- a/src/mainboard/google/dedede/variants/beadrix/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/beadrix/overridetree.cb
@@ -49,6 +49,16 @@ chip soc/intel/jasperlake
 						register "type" = "UPC_TYPE_INTERNAL"
 						device usb 2.5 on end
 					end
+					chip drivers/usb/acpi
+						register "desc" = ""LTE""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "has_power_resource" = "1"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)"
+						register "reset_off_delay_ms" = "20"
+						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)"
+						register "enable_delay_ms" = "20"
+						device usb 3.3 on end
+					end
 				end
 			end
 		end # USB xHCI