diff --git a/src/mainboard/google/brya/variants/moli/Makefile.inc b/src/mainboard/google/brya/variants/moli/Makefile.inc
index f5c589792d..b799b4d7b8 100644
--- a/src/mainboard/google/brya/variants/moli/Makefile.inc
+++ b/src/mainboard/google/brya/variants/moli/Makefile.inc
@@ -5,3 +5,6 @@ romstage-y += memory.c
 
 ramstage-y += gpio.c
 ramstage-y += ramstage.c
+
+ramstage-$(CONFIG_FW_CONFIG) += fw_config.c
+ramstage-$(CONFIG_FW_CONFIG) += variant.c
diff --git a/src/mainboard/google/brya/variants/moli/fw_config.c b/src/mainboard/google/brya/variants/moli/fw_config.c
new file mode 100644
index 0000000000..5302923cd2
--- /dev/null
+++ b/src/mainboard/google/brya/variants/moli/fw_config.c
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootstate.h>
+#include <console/console.h>
+#include <fw_config.h>
+#include <gpio.h>
+
+static const struct pad_config bt_i2s_enable_pads[] = {
+	PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3),	/* BT_I2S_BCLK */
+	PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3),	/* BT_I2S_SYNC */
+	PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3),	/* BT_I2S_SDO */
+	PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3),	/* BT_I2S_SDI */
+	PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1),	/* SSP2_SCLK */
+	PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1),	/* SSP2_SFRM */
+	PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1),	/* SSP_TXD */
+	PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1),	/* SSP_RXD */
+};
+
+static const struct pad_config bt_i2s_disable_pads[] = {
+	PAD_NC(GPP_VGPIO_30, NONE),
+	PAD_NC(GPP_VGPIO_31, NONE),
+	PAD_NC(GPP_VGPIO_32, NONE),
+	PAD_NC(GPP_VGPIO_33, NONE),
+	PAD_NC(GPP_VGPIO_34, NONE),
+	PAD_NC(GPP_VGPIO_35, NONE),
+	PAD_NC(GPP_VGPIO_36, NONE),
+	PAD_NC(GPP_VGPIO_37, NONE),
+};
+
+static void fw_config_handle(void *unused)
+{
+	if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) {
+		printk(BIOS_INFO, "Disable BT offload audio related GPIO pins.\n");
+		gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads));
+		return;
+	}
+
+	if (fw_config_probe(FW_CONFIG(AUDIO, NAU88L25B_I2S))) {
+		printk(BIOS_INFO, "BT offload enabled over I2S with NAU88L25B\n");
+		gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads));
+	}
+
+}
+BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);
diff --git a/src/mainboard/google/brya/variants/moli/overridetree.cb b/src/mainboard/google/brya/variants/moli/overridetree.cb
index 07839992b4..e23107936e 100644
--- a/src/mainboard/google/brya/variants/moli/overridetree.cb
+++ b/src/mainboard/google/brya/variants/moli/overridetree.cb
@@ -9,6 +9,10 @@ fw_config
 		option	STORAGE_NVME	1
 		option	STORAGE_EMMC	2
 	end
+	field AUDIO 6
+		option AUDIO_UNKNOWN	0
+		option NAU88L25B_I2S	1
+	end
 end
 chip soc/intel/alderlake
 	# Enable HDMI2 in PortA, HDMI1 in PortB, HDMI/DP in Port2
diff --git a/src/mainboard/google/brya/variants/moli/variant.c b/src/mainboard/google/brya/variants/moli/variant.c
new file mode 100644
index 0000000000..951bfe5365
--- /dev/null
+++ b/src/mainboard/google/brya/variants/moli/variant.c
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <chip.h>
+#include <fw_config.h>
+#include <baseboard/variants.h>
+#include <variant/gpio.h>
+#include <acpi/acpigen.h>
+
+void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config)
+{
+	config->cnvi_bt_audio_offload = fw_config_probe(FW_CONFIG(AUDIO,
+							NAU88L25B_I2S));
+}