Add -D / --dump-readable option which prints the Super I/O register

contents in human-readable form (e.g. "COM1 enabled" etc.) instead
of the hex-table format from -d / --dump.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2795 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

util/superiotool/README

@@ -28,9 +28,10 @@ Installation
 Usage
 -----
 
-  $ superiotool [-d] [-V] [-v] [-h]
+ $ superiotool [-d] [-D] [-V] [-v] [-h]
 
  -d | --dump            Dump Super I/O registers
+ -D | --dump-readable   Dump Super I/O registers in human-readable format
  -V | --verbose         Verbose mode
  -v | --version         Show the superiotool version
  -h | --help            Show a short help text
@@ -44,10 +45,14 @@ Typical usage of superiotool:
 
    $ superiotool
 
- - Detailed register dump of the Super I/O (if detected):
+ - Register dump as table of hex-values of the Super I/O (if detected):
 
    $ superiotool -d
 
+ - Detailed register dump in human-readable format:
+
+   $ superiotool -D
+
 
 Supported Super I/O Chips
 -------------------------

util/superiotool/fintek.c

@@ -33,8 +33,11 @@ const static struct superio_registers reg_table[] = {
 	{EOT}
 };
 
-void dump_fintek(uint16_t port, uint16_t did)
+static void dump_readable_fintek(uint16_t port, uint16_t did)
 {
+	if (!dump_readable)
+		return;
+
 	switch (did) {
 	case 0x0604:
 		printf("Fintek F71805\n");
@@ -124,9 +127,7 @@ void probe_idregs_fintek(uint16_t port)
        	       get_superio_name(reg_table, did), vid, did, port);
 
 	dump_superio("Fintek", reg_table, port, did);
-
+	dump_readable_fintek(port, did);
-	/* TODO: Revive this as --dump-human-readable output. */
-	/* dump_fintek(port, did); */
 
 	exit_conf_mode_winbond_fintek_ite_8787(port);
 }

util/superiotool/ite.c

@@ -194,12 +194,6 @@ const static struct superio_registers reg_table[] = {
 	{EOT}
 };
 
-/* TODO: Drop this function later. */
-void dump_ite(uint16_t port, uint16_t id)
-{
-	dump_superio("ITE", reg_table, port, id);
-}
-
 /**
  * Enable configuration sequence (ITE uses this for newer IT87[012]xF).
  *
@@ -244,6 +238,7 @@ static void probe_idregs_ite_helper(uint16_t port)
 	       get_superio_name(reg_table, id), id, chipver, port);
 
 	dump_superio("ITE", reg_table, port, id);
+	dump_superio_readable(port); /* TODO */
 }
 
 void probe_idregs_ite(uint16_t port)

util/superiotool/nsc.c

@@ -25,8 +25,11 @@ static const char *familyid[] = {
 	[0xf1] = "PC8374 (Winbond/NatSemi)"
 };
 
-void dump_ns8374(uint16_t port)
+static void dump_readable_ns8374(uint16_t port)
 {
+	if (!dump_readable)
+		return;
+
 	printf("Enables: 21=%02x, 22=%02x, 23=%02x, 24=%02x, 26=%02x\n",
 	       regval(port, 0x21), regval(port, 0x22), regval(port, 0x23),
 	       regval(port, 0x24), regval(port, 0x26));
@@ -79,7 +82,7 @@ void probe_idregs_simple(uint16_t port)
 
 	switch (id) {
 	case 0xf1:
-		dump_ns8374(port);
+		dump_readable_ns8374(port);
 		break;
 	default:
 		printf("No dump for 0x%02x\n", id);

util/superiotool/smsc.c

@@ -69,6 +69,7 @@ void probe_idregs_smsc(uint16_t port)
 	       get_superio_name(reg_table, id), id, rev, port);
 
 	dump_superio("SMSC", reg_table, port, id);
+	dump_superio_readable(port); /* TODO */
 
 	exit_conf_mode_smsc(port);
 }

util/superiotool/superiotool.c

@@ -23,7 +23,7 @@
 #include "superiotool.h"
 
 /* Command line options. */
-int dump = 0, verbose = 0;
+int dump = 0, dump_readable = 0, verbose = 0;
 
 uint8_t regval(uint16_t port, uint8_t reg)
 {
@@ -147,6 +147,13 @@ void dump_superio(const char *vendor,
 	}
 }
 
+void dump_superio_readable(uint16_t port)
+{
+	/* TODO */
+	if (dump_readable)
+		printf("No human-readable dump available for this Super I/O\n");
+}
+
 void no_superio_found(uint16_t port)
 {
 	if (!verbose)
@@ -165,18 +172,22 @@ int main(int argc, char *argv[])
 
 	const static struct option long_options[] = {
 		{"dump",		no_argument, NULL, 'd'},
+		{"dump-readable",	no_argument, NULL, 'D'},
 		{"verbose",		no_argument, NULL, 'V'},
 		{"version",		no_argument, NULL, 'v'},
 		{"help",		no_argument, NULL, 'h'},
 		{0, 0, 0, 0}
 	};
 
-	while ((opt = getopt_long(argc, argv, "dVvh",
+	while ((opt = getopt_long(argc, argv, "dDVvh",
 				  long_options, &option_index)) != EOF) {
 		switch (opt) {
 		case 'd':
 			dump = 1;
 			break;
+		case 'D':
+			dump_readable = 1;
+			break;
 		case 'V':
 			verbose = 1;
 			break;

util/superiotool/superiotool.h

@@ -31,8 +31,9 @@
 
 #define SUPERIOTOOL_VERSION "0.1"
 
-#define USAGE "Usage: superiotool [-d] [-V] [-v] [-h]\n\n\
+#define USAGE "Usage: superiotool [-d] [-D] [-V] [-v] [-h]\n\n\
   -d | --dump            Dump Super I/O registers\n\
+  -D | --dump-readable   Dump Super I/O registers in human-readable format\n\
   -V | --verbose         Verbose mode\n\
   -v | --version         Show the superiotool version\n\
   -h | --help            Show a short help text\n\n\
@@ -54,14 +55,14 @@ and print its vendor, name, ID, version, and config port.\n"
 #define MAXNUMPORTS	(2 + 1)		/* Maximum number of Super I/O ports */
 
 /* Command line parameters. */
-extern int dump, verbose;
+extern int dump, dump_readable, verbose;
 
 struct superio_registers {
 	int32_t superio_id;		/* Signed, as we need EOT. */
-	const char name[MAXNAMELEN];
+	const char name[MAXNAMELEN];	/* Super I/O name */
 	struct {
 		int ldn;
-		const char *name;
+		const char *name;	/* LDN name */
 		int idx[IDXSIZE];
 		int def[IDXSIZE];
 	} ldn[LDNSIZE];
@@ -77,18 +78,16 @@ const char *get_superio_name(const struct superio_registers reg_table[],
 			     uint16_t id);
 void dump_superio(const char *name, const struct superio_registers reg_table[],
 		  uint16_t port, uint16_t id);
+void dump_superio_readable(uint16_t port);
 void no_superio_found(uint16_t port);
 
 /* fintek.c */
-void dump_fintek(uint16_t port, uint16_t did);
 void probe_idregs_fintek(uint16_t port);
 
 /* ite.c */
-void dump_ite(uint16_t port, uint16_t id);
 void probe_idregs_ite(uint16_t port);
 
 /* nsc.c */
-void dump_ns8374(uint16_t port);
 void probe_idregs_simple(uint16_t port);
 
 /* smsc.c */

util/superiotool/winbond.c

@@ -150,6 +150,7 @@ void probe_idregs_winbond(uint16_t port)
 
 	/* TODO: Special notes in dump output for the MISC entries. */
 	dump_superio("Winbond", reg_table, port, id);
+	dump_superio_readable(port); /* TODO */
 
 	exit_conf_mode_winbond_fintek_ite_8787(port);
 }