mb/intel/jasperlake_rvp: Enable Wifi and BT

Enable Wifi and Bluetooth for Jasper Lake RVP with following changes:
1. Enable related pci root ports for WLAN and BT
2. Disable unused root ports and clkreq for unused clocks
3. Configure GPIOs properly for M.2 port

BUG=None
BRANCH=None
TEST=Code compiles and able to detect Wifi/BT module on board.

Change-Id: Ifbd07022c05769c04ecd49c81a4430947125b32a
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39933
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb

@@ -63,22 +63,19 @@ chip soc/intel/jasperlake
 	register "PchHdaAudioLinkDmicEnable[1]" = "1"
 
 	# PCIe port 1 for M.2 E-key WLAN
-	register "PcieRpEnable[1]" = "1"
-
-	# RP 1 uses CLK SRC 1
-	register "PcieClkSrcUsage[1]" = "0x01"
-
-	# ClkReq-to-ClkSrc mapping for CLK SRC 1
-	register "PcieClkSrcClkReq[1]" = "0x01"
-
 	# Enable Root Port 4(x4) for NVMe
+	register "PcieRpEnable[1]" = "1"
 	register "PcieRpEnable[4]" = "1"
 
-	# RP 4 uses CLK SRC 0
 	register "PcieClkSrcUsage[0]" = "0x04"
+	register "PcieClkSrcUsage[1]" = "0x01"
 
-	# ClkReq-to-ClkSrc mapping for CLK SRC 0
 	register "PcieClkSrcClkReq[0]" = "0x00"
+	register "PcieClkSrcClkReq[1]" = "0x01"
+	register "PcieClkSrcClkReq[2]" = "0x02"
+	register "PcieClkSrcClkReq[3]" = "0x03"
+	register "PcieClkSrcClkReq[4]" = "0x04"
+	register "PcieClkSrcClkReq[5]" = "0x05"
 
 	register "SataEnable" = "0"
 
@@ -285,12 +282,12 @@ chip soc/intel/jasperlake
 		device pci 19.1 off end # I2C #5
 		device pci 19.2 on  end # UART #2
 		device pci 1a.0 on  end # eMMC
-	        device pci 1c.0 off end # PCI Express Port 1
+	        device pci 1c.0 on  end # PCI Express Port 1
-	        device pci 1c.1 on  end # PCI Express Port 2
+	        device pci 1c.1 off end # PCI Express Port 2
 	        device pci 1c.2 off end # PCI Express Port 3
 	        device pci 1c.3 off end # PCI Express Port 4
-	        device pci 1c.4 on  end # PCI Express Port 5
+	        device pci 1c.4 off end # PCI Express Port 5
-	        device pci 1c.5 off end # PCI Express Port 6
+	        device pci 1c.5 on  end # PCI Express Port 6
 	        device pci 1c.6 off end # PCI Express Port 7
 	        device pci 1c.7 off end # PCI Express Port 8
 		device pci 1e.0 on  end # UART #0

src/mainboard/intel/jasperlake_rvp/variants/jslrvp/gpio.c

@@ -15,6 +15,9 @@ static const struct pad_config gpio_table[] = {
 	/* M.2_WWAN_DISABLE_N */
 	PAD_CFG_GPO(GPP_A19, 1, PLTRST),
 
+	/* M.2_WLAN_PERST_N */
+	PAD_CFG_GPO(GPP_B17, 1, PLTRST),
+
 	/* WWAN_PERST_N */
 	PAD_CFG_GPO(GPP_C0, 0, PLTRST),
 
@@ -27,6 +30,12 @@ static const struct pad_config gpio_table[] = {
 	/* I2C0_SCL */
 	PAD_CFG_NF(GPP_C17, UP_2K, DEEP, NF1),
 
+	/* WIFI_RF_KILL_N */
+	PAD_CFG_GPO(GPP_D0, 1, PLTRST),
+
+	/* BT_RF_KILL_N */
+	PAD_CFG_GPO(GPP_D1, 1, PLTRST),
+
 	/* I2S_MCLK */
 	PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1),
 
@@ -36,12 +45,21 @@ static const struct pad_config gpio_table[] = {
 	/* WWAN EN GPIO */
 	PAD_CFG_GPO(GPP_H7, 1, PLTRST),
 
+	/* M.2_BT_I2S2_SCLK */
+	PAD_CFG_GPI(GPP_H11, NONE, PLTRST),
+
+	/* M.2_BT_I2S2_RXD */
+	PAD_CFG_GPI(GPP_H14, NONE, PLTRST),
+
 	/* I2S1_SCLK */
 	PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1),
 
 	/* Audio Jack Detection */
 	PAD_CFG_GPI_INT(GPP_H16, NONE, PLTRST, EDGE_BOTH),
 
+	/* M2_CNVI_EN_N */
+	PAD_CFG_GPO(GPP_H19, 0, PLTRST),
+
 	/* I2S0_SCLK */
 	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),