mb/google/hatch: Remove unused USB2 port from Noibat

This port isn't packed on the board, so remove from
the devicetree.

BUG=b:154585046,b:156429564
BRANCH=none
TEST=none

Change-Id: Ib4aee337f67453adcebff7e93e25db7a838e3b2d
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42269
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Edward O'Callaghan 2020-06-11 11:29:21 +10:00 committed by Edward O'Callaghan
parent d5f1e0f973
commit f2ccd072cc
1 changed files with 2 additions and 21 deletions

View File

@ -49,14 +49,7 @@ chip soc/intel/cannonlake
.pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 1 }" # Type-A Port 1
register "usb2_ports[4]" = "{ register "usb2_ports[4]" = "USB2_PORT_EMPTY"
.enable = 1,
.ocpin = OC_SKIP,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 4
register "usb2_ports[5]" = "{ register "usb2_ports[5]" = "{
.enable = 1, .enable = 1,
.ocpin = OC0, .ocpin = OC0,
@ -82,7 +75,7 @@ chip soc/intel/cannonlake
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 register "usb3_ports[5]" = "USB3_PORT_EMPTY" # Type-A Port 4
# Enable eMMC HS400 # Enable eMMC HS400
register "ScsEmmcHs400Enabled" = "1" register "ScsEmmcHs400Enabled" = "1"
@ -222,12 +215,6 @@ chip soc/intel/cannonlake
register "group" = "ACPI_PLD_GROUP(1, 2)" register "group" = "ACPI_PLD_GROUP(1, 2)"
device usb 2.3 on end device usb 2.3 on end
end end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Rear Middle""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device usb 2.4 on end
end
chip drivers/usb/acpi chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Rear Left"" register "desc" = ""USB2 Type-A Rear Left""
register "type" = "UPC_TYPE_A" register "type" = "UPC_TYPE_A"
@ -267,12 +254,6 @@ chip soc/intel/cannonlake
register "group" = "ACPI_PLD_GROUP(1, 0)" register "group" = "ACPI_PLD_GROUP(1, 0)"
device usb 3.4 on end device usb 3.4 on end
end end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Rear Middle""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device usb 3.5 on end
end
end end
end end
end # USB xHCI end # USB xHCI