Add support for the LiPPERT Cool RoadRunner-LX embedded PC board:
- PC/104+ form factor - AMD Geode-LX CPU/northbridge - AMD CS5536 southbridge - ITE IT8712F superio http://www.lippert-at.com/index.php?id=408 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3760 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Jens Rottmann
Stefan Reinauer
parent
8ab91d875b
commit
f31ca16793
|
|
@ -0,0 +1,232 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
##
|
||||
## Based on Config.lb from AMD's DB800 and DBM690T mainboards.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
##
|
||||
## Compute the location and size of where this firmware image
|
||||
## (coreboot plus bootloader) will live in the boot rom chip.
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
default ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
else
|
||||
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
default ROM_SECTION_OFFSET = 0
|
||||
end
|
||||
|
||||
##
|
||||
## Compute the start location and size size of
|
||||
## The coreboot bootloader.
|
||||
##
|
||||
|
||||
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
|
||||
|
||||
##
|
||||
## Compute where this copy of coreboot will start in the boot rom
|
||||
##
|
||||
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
|
||||
|
||||
##
|
||||
## Compute a range of ROM that can cached to speed up coreboot,
|
||||
## execution speed.
|
||||
##
|
||||
## XIP_ROM_SIZE must be a power of 2.
|
||||
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||
##
|
||||
default XIP_ROM_SIZE=65536
|
||||
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
||||
|
||||
|
||||
##
|
||||
## Set all of the defaults for an x86 architecture
|
||||
##
|
||||
|
||||
arch i386 end
|
||||
|
||||
##
|
||||
## Build the objects we have code for in this directory.
|
||||
##
|
||||
|
||||
driver mainboard.o
|
||||
|
||||
if HAVE_PIRQ_TABLE
|
||||
object irq_tables.o
|
||||
end
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
#compile cache_as_ram.c to auto.inc
|
||||
makerule ./cache_as_ram_auto.inc
|
||||
depends "$(MAINBOARD)/cache_as_ram_auto.c"
|
||||
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
|
||||
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
|
||||
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
##
|
||||
## Build our 16 bit and 32 bit coreboot entry code
|
||||
##
|
||||
mainboardinit cpu/x86/16bit/entry16.inc
|
||||
mainboardinit cpu/x86/32bit/entry32.inc
|
||||
ldscript /cpu/x86/16bit/entry16.lds
|
||||
ldscript /cpu/x86/32bit/entry32.lds
|
||||
|
||||
##
|
||||
## Build our reset vector (This is where coreboot is entered)
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/x86/16bit/reset16.inc
|
||||
ldscript /cpu/x86/16bit/reset16.lds
|
||||
else
|
||||
mainboardinit cpu/x86/32bit/reset32.inc
|
||||
ldscript /cpu/x86/32bit/reset32.lds
|
||||
end
|
||||
|
||||
### Should this be in the northbridge code?
|
||||
#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
|
||||
|
||||
##
|
||||
## Include an id string (For safe flashing)
|
||||
##
|
||||
mainboardinit arch/i386/lib/id.inc
|
||||
ldscript /arch/i386/lib/id.lds
|
||||
|
||||
###
|
||||
### This is the early phase of coreboot startup
|
||||
### Things are delicate and we test to see if we should
|
||||
### failover to another image.
|
||||
###
|
||||
if USE_FALLBACK_IMAGE
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
# mainboardinit ./failover.inc
|
||||
end
|
||||
|
||||
###
|
||||
### O.k. We aren't just an intermediary anymore!
|
||||
###
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
|
||||
mainboardinit ./cache_as_ram_auto.inc
|
||||
end
|
||||
|
||||
##
|
||||
## Include the secondary Configuration files
|
||||
##
|
||||
dir /pc80
|
||||
config chip.h
|
||||
register "sio_gp1x_config" = "0x20" # bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off Live LED
|
||||
|
||||
chip northbridge/amd/lx
|
||||
device pci_domain 0 on
|
||||
device pci 1.0 on end # Northbridge
|
||||
device pci 1.1 on end # Graphics
|
||||
device pci 1.2 on end # AES
|
||||
chip southbridge/amd/cs5536
|
||||
# IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
|
||||
# SIRQ Mode = Active(Quiet) mode. Save power....
|
||||
# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
|
||||
register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010
|
||||
register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above
|
||||
register "lpc_serirq_mode" = "1"
|
||||
register "enable_gpio_int_route" = "0x0D0C0700"
|
||||
register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
|
||||
register "enable_USBP4_device" = "0" # 0: host, 1:device
|
||||
register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
|
||||
register "com1_enable" = "0"
|
||||
register "com1_address" = "0x3E8"
|
||||
register "com1_irq" = "6"
|
||||
register "com2_enable" = "0"
|
||||
register "com2_address" = "0x2E8"
|
||||
register "com2_irq" = "6"
|
||||
register "unwanted_vpci[0]" = "0" # End of list has a zero
|
||||
device pci 8.0 on end # Slot4
|
||||
device pci 9.0 on end # Slot3
|
||||
device pci a.0 on end # Slot2
|
||||
device pci b.0 on end # Slot1
|
||||
device pci c.0 on end # IT8888
|
||||
device pci e.0 on end # Ethernet
|
||||
device pci f.0 on # ISA Bridge
|
||||
chip superio/ite/it8712f
|
||||
device pnp 2e.0 off # Floppy
|
||||
io 0x60 = 0x3f0
|
||||
irq 0x70 = 6
|
||||
drq 0x74 = 2
|
||||
end
|
||||
device pnp 2e.1 on # Com1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.2 on # Com2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.3 on # Parallel Port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 7
|
||||
end
|
||||
device pnp 2e.4 on # EC
|
||||
io 0x60 = 0x290
|
||||
io 0x62 = 0x230
|
||||
irq 0x70 = 9
|
||||
end
|
||||
device pnp 2e.5 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
end
|
||||
device pnp 2e.6 on # Mouse
|
||||
irq 0x70 = 12
|
||||
end
|
||||
device pnp 2e.7 on # GPIO
|
||||
io 0x62 = 0x1220
|
||||
#io 0x64 = 0x1200
|
||||
end
|
||||
device pnp 2e.8 off # MIDI
|
||||
io 0x60 = 0x300
|
||||
irq 0x70 = 9
|
||||
end
|
||||
device pnp 2e.9 off # GAME
|
||||
io 0x60 = 0x220
|
||||
end
|
||||
device pnp 2e.a off end # CIR
|
||||
end
|
||||
end
|
||||
device pci f.2 on end # IDE Controller
|
||||
device pci f.3 on end # Audio
|
||||
device pci f.4 on end # OHCI
|
||||
device pci f.5 on end # EHCI
|
||||
end
|
||||
end
|
||||
# APIC cluster is late CPU init.
|
||||
device apic_cluster 0 on
|
||||
chip cpu/amd/model_lx
|
||||
device apic 0 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
@ -0,0 +1,211 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
##
|
||||
## Based on Options.lb from AMD's DB800 mainboard.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
uses HAVE_MP_TABLE
|
||||
uses HAVE_PIRQ_TABLE
|
||||
uses USE_FALLBACK_IMAGE
|
||||
uses HAVE_FALLBACK_BOOT
|
||||
uses HAVE_HARD_RESET
|
||||
uses HAVE_OPTION_TABLE
|
||||
uses USE_OPTION_TABLE
|
||||
uses CONFIG_ROM_PAYLOAD
|
||||
uses CONFIG_IDE
|
||||
uses CONFIG_FS_PAYLOAD
|
||||
uses CONFIG_FS_EXT2
|
||||
uses AUTOBOOT_DELAY
|
||||
uses AUTOBOOT_CMDLINE
|
||||
uses IRQ_SLOT_COUNT
|
||||
uses MAINBOARD
|
||||
uses MAINBOARD_VENDOR
|
||||
uses MAINBOARD_PART_NUMBER
|
||||
uses COREBOOT_EXTRA_VERSION
|
||||
uses ARCH
|
||||
uses FALLBACK_SIZE
|
||||
uses STACK_SIZE
|
||||
uses HEAP_SIZE
|
||||
uses ROM_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_IMAGE_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_SECTION_OFFSET
|
||||
uses CONFIG_ROM_PAYLOAD_START
|
||||
uses CONFIG_COMPRESS
|
||||
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
|
||||
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
||||
uses CONFIG_PRECOMPRESSED_PAYLOAD
|
||||
uses PAYLOAD_SIZE
|
||||
uses _ROMBASE
|
||||
uses _RAMBASE
|
||||
uses XIP_ROM_SIZE
|
||||
uses XIP_ROM_BASE
|
||||
uses HAVE_MP_TABLE
|
||||
uses CROSS_COMPILE
|
||||
uses CC
|
||||
uses HOSTCC
|
||||
uses OBJCOPY
|
||||
uses DEBUG
|
||||
uses DEFAULT_CONSOLE_LOGLEVEL
|
||||
uses MAXIMUM_CONSOLE_LOGLEVEL
|
||||
uses CONFIG_CONSOLE_SERIAL8250
|
||||
uses TTYS0_BAUD
|
||||
uses TTYS0_BASE
|
||||
uses TTYS0_LCS
|
||||
uses CONFIG_UDELAY_TSC
|
||||
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
|
||||
uses CONFIG_CONSOLE_VGA
|
||||
uses CONFIG_PCI_ROM_RUN
|
||||
uses CONFIG_VIDEO_MB
|
||||
uses USE_DCACHE_RAM
|
||||
uses DCACHE_RAM_BASE
|
||||
uses DCACHE_RAM_SIZE
|
||||
uses PIRQ_ROUTE
|
||||
|
||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||
default ROM_SIZE = 512*1024
|
||||
|
||||
###
|
||||
### Build options
|
||||
###
|
||||
default CONFIG_CONSOLE_VGA=0
|
||||
default CONFIG_VIDEO_MB=8
|
||||
default CONFIG_PCI_ROM_RUN=0
|
||||
|
||||
##
|
||||
## Build code for the fallback boot
|
||||
##
|
||||
default HAVE_FALLBACK_BOOT=1
|
||||
|
||||
##
|
||||
## no MP table
|
||||
##
|
||||
default HAVE_MP_TABLE=0
|
||||
|
||||
##
|
||||
## Build code to reset the motherboard from coreboot
|
||||
##
|
||||
default HAVE_HARD_RESET=0
|
||||
|
||||
## Delay timer options
|
||||
##
|
||||
default CONFIG_UDELAY_TSC=1
|
||||
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
|
||||
|
||||
##
|
||||
## Build code to export a programmable irq routing table
|
||||
##
|
||||
default HAVE_PIRQ_TABLE=1
|
||||
default IRQ_SLOT_COUNT=7
|
||||
default PIRQ_ROUTE=1
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
##
|
||||
default HAVE_OPTION_TABLE=0
|
||||
|
||||
###
|
||||
### coreboot layout values
|
||||
###
|
||||
|
||||
## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
|
||||
default ROM_IMAGE_SIZE = 65536
|
||||
default FALLBACK_SIZE = 131072
|
||||
|
||||
##
|
||||
## enable CACHE_AS_RAM specifics
|
||||
##
|
||||
default USE_DCACHE_RAM=1
|
||||
default DCACHE_RAM_BASE=0xc8000
|
||||
default DCACHE_RAM_SIZE=0x08000
|
||||
|
||||
##
|
||||
## Use a small 8K stack
|
||||
##
|
||||
default STACK_SIZE=0x2000
|
||||
|
||||
##
|
||||
## Use a small 16K heap
|
||||
##
|
||||
default HEAP_SIZE=0x4000
|
||||
|
||||
##
|
||||
## Only use the option table in a normal image
|
||||
##
|
||||
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||
default USE_OPTION_TABLE = 0
|
||||
|
||||
default _RAMBASE = 0x00004000
|
||||
|
||||
default CONFIG_ROM_PAYLOAD = 1
|
||||
|
||||
##
|
||||
## The default compiler
|
||||
##
|
||||
default CROSS_COMPILE=""
|
||||
default CC="$(CROSS_COMPILE)gcc -m32"
|
||||
default HOSTCC="gcc"
|
||||
|
||||
##
|
||||
## The Serial Console
|
||||
##
|
||||
|
||||
# To Enable the Serial Console
|
||||
default CONFIG_CONSOLE_SERIAL8250=1
|
||||
|
||||
## Select the serial console baud rate
|
||||
default TTYS0_BAUD=115200
|
||||
#default TTYS0_BAUD=57600
|
||||
#default TTYS0_BAUD=38400
|
||||
#default TTYS0_BAUD=19200
|
||||
#default TTYS0_BAUD=9600
|
||||
#default TTYS0_BAUD=4800
|
||||
#default TTYS0_BAUD=2400
|
||||
#default TTYS0_BAUD=1200
|
||||
|
||||
# Select the serial console base port
|
||||
default TTYS0_BASE=0x3f8
|
||||
|
||||
# Select the serial protocol
|
||||
# This defaults to 8 data bits, 1 stop bit, and no parity
|
||||
default TTYS0_LCS=0x3
|
||||
|
||||
# Compile extra debugging code
|
||||
default DEBUG=1
|
||||
|
||||
##
|
||||
### Select the coreboot loglevel
|
||||
##
|
||||
## EMERG 1 system is unusable
|
||||
## ALERT 2 action must be taken immediately
|
||||
## CRIT 3 critical conditions
|
||||
## ERR 4 error conditions
|
||||
## WARNING 5 warning conditions
|
||||
## NOTICE 6 normal but significant condition
|
||||
## INFO 7 informational
|
||||
## DEBUG 8 debug-level messages
|
||||
## SPEW 9 Way too many details
|
||||
|
||||
## Request this level of debugging output
|
||||
default DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
## At a maximum only compile in this level of debugging
|
||||
default MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
end
|
||||
|
|
@ -0,0 +1,164 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
* Copyright (C) 2007 Advanced Micro Devices, Inc.
|
||||
*
|
||||
* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#define ASSEMBLY 1
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/hlt.h>
|
||||
#include "pc80/serial.c"
|
||||
#include "arch/i386/lib/console.c"
|
||||
#include "ram/ramtest.c"
|
||||
#include "cpu/x86/bist.h"
|
||||
#include "cpu/x86/msr.h"
|
||||
#include <cpu/amd/lxdef.h>
|
||||
#include <cpu/amd/geode_post_code.h>
|
||||
#include "southbridge/amd/cs5536/cs5536.h"
|
||||
|
||||
#define POST_CODE(x) outb(x, 0x80)
|
||||
|
||||
#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
|
||||
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
|
||||
#include "superio/ite/it8712f/it8712f_early_serial.c"
|
||||
|
||||
#define ManualConf 1 /* No automatic strapped PLL config */
|
||||
#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */
|
||||
#define PLLMSRlo 0x00DE6001
|
||||
#define DIMM0 0xA0
|
||||
#define DIMM1 0xA2
|
||||
|
||||
static inline int spd_read_byte(unsigned int device, unsigned int address)
|
||||
{
|
||||
if (device != DIMM0) return 0xFF; // no DIMM1, don't even try
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
#include "northbridge/amd/lx/raminit.h"
|
||||
#include "northbridge/amd/lx/pll_reset.c"
|
||||
#include "northbridge/amd/lx/raminit.c"
|
||||
#include "sdram/generic_sdram.c"
|
||||
#include "cpu/amd/model_lx/cpureginit.c"
|
||||
#include "cpu/amd/model_lx/syspreinit.c"
|
||||
|
||||
static void msr_init(void)
|
||||
{
|
||||
msr_t msr;
|
||||
|
||||
/* Setup access to the cache for under 1MB. */
|
||||
msr.hi = 0x24fffc02;
|
||||
msr.lo = 0x1000A000; /* 0-A0000 write back */
|
||||
wrmsr(CPU_RCONF_DEFAULT, msr);
|
||||
|
||||
msr.hi = 0x0; /* Write back */
|
||||
msr.lo = 0x0;
|
||||
wrmsr(CPU_RCONF_A0_BF, msr);
|
||||
wrmsr(CPU_RCONF_C0_DF, msr);
|
||||
wrmsr(CPU_RCONF_E0_FF, msr);
|
||||
|
||||
/* Setup access to the cache for under 640K. Note MC not setup yet. */
|
||||
msr.hi = 0x20000000;
|
||||
msr.lo = 0xfff80;
|
||||
wrmsr(MSR_GLIU0 + 0x20, msr);
|
||||
|
||||
msr.hi = 0x20000000;
|
||||
msr.lo = 0x80fffe0;
|
||||
wrmsr(MSR_GLIU0 + 0x21, msr);
|
||||
|
||||
msr.hi = 0x20000000;
|
||||
msr.lo = 0xfff80;
|
||||
wrmsr(MSR_GLIU1 + 0x20, msr);
|
||||
|
||||
msr.hi = 0x20000000;
|
||||
msr.lo = 0x80fffe0;
|
||||
wrmsr(MSR_GLIU1 + 0x21, msr);
|
||||
}
|
||||
|
||||
static const u16 sio_init_table[] = { // hi=data, lo=index
|
||||
0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...)
|
||||
0x1E2C, // disable ATXPowerGood - will cause a reboot!
|
||||
0x0423, // don't delay POWerOK1/2
|
||||
0x9072, // watchdog triggers POWOK, counts seconds
|
||||
#if !USE_WATCHDOG_ON_BOOT
|
||||
0x0073, 0x0074, // disable watchdog by setting timeout to 0
|
||||
#endif
|
||||
0xBF25, 0x372A, 0xF326, // select GPIO function for most pins
|
||||
0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1)
|
||||
0x1E2C, // VIN6=enabled?, FAN4/5 enabled, VIN7=internal, VIN3=enabled
|
||||
0x46B8, 0x0CB9, // enable pullups
|
||||
0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1
|
||||
0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector)
|
||||
0x26C8, // config GP15,12,11 as output; GP14 as input
|
||||
0x2DF5, // map Hw Monitor Thermal Output to GP55
|
||||
0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use)
|
||||
};
|
||||
|
||||
/* Early mainboard specific GPIO setup. */
|
||||
static void mb_gpio_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* Init SuperIO WDT, GPIOs. Done early, WDT init may trigger reset! */
|
||||
it8712f_enter_conf();
|
||||
for (i=0; i<ARRAY_SIZE(sio_init_table); i++) {
|
||||
u16 val = sio_init_table[i];
|
||||
outb((u8)val, SIO_INDEX); outb(val>>8, SIO_DATA);
|
||||
}
|
||||
it8712f_exit_conf();
|
||||
}
|
||||
|
||||
void cache_as_ram_main(void)
|
||||
{
|
||||
POST_CODE(0x01);
|
||||
|
||||
static const struct mem_controller memctrl[] = {
|
||||
{.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}}
|
||||
};
|
||||
|
||||
SystemPreInit();
|
||||
msr_init();
|
||||
|
||||
cs5536_early_setup();
|
||||
|
||||
/* Note: must do this AFTER the early_setup! It is counting on some
|
||||
* early MSR setup for CS5536.
|
||||
*/
|
||||
it8712f_enable_serial(0, TTYS0_BASE); // does not use its 1st parameter
|
||||
mb_gpio_init();
|
||||
uart_init();
|
||||
console_init();
|
||||
|
||||
pll_reset(ManualConf);
|
||||
|
||||
cpuRegInit();
|
||||
|
||||
sdram_initialize(1, memctrl);
|
||||
|
||||
/* Check memory. */
|
||||
/* ram_check(0x00000000, 640 * 1024); */
|
||||
|
||||
/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
|
||||
return;
|
||||
}
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
*
|
||||
* Based on chip.h from AMD's DB800 mainboard.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
extern struct chip_operations mainboard_lippert_roadrunner_lx_ops;
|
||||
|
||||
struct mainboard_lippert_roadrunner_lx_config {
|
||||
u8 sio_gp1x_config; // bit5=Live LED, bit2=RS485_EN2, bit1=RS485_EN1
|
||||
};
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
*
|
||||
* Based on irq_tables.c from AMD's DB800 mainboard.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <arch/pirq_routing.h>
|
||||
#include <console/console.h>
|
||||
#include <arch/io.h>
|
||||
#include <arch/pirq_routing.h>
|
||||
#include "../../../southbridge/amd/cs5536/cs5536.h"
|
||||
|
||||
/* Platform IRQs */
|
||||
#define PIRQA 10
|
||||
#define PIRQB 11
|
||||
#define PIRQC 5
|
||||
#define PIRQD 15
|
||||
|
||||
/* Map */
|
||||
#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
|
||||
#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
|
||||
#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
|
||||
#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
|
||||
|
||||
/* Link */
|
||||
#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
|
||||
#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
|
||||
#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
|
||||
#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
|
||||
|
||||
const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32 + 16 * IRQ_SLOT_COUNT, /* there can be total 7 devices on the bus */
|
||||
0x00, /* Where the interrupt router lies (bus) */
|
||||
(0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
|
||||
0x00, /* IRQs devoted exclusively to PCI usage */
|
||||
0x100B, /* Vendor */
|
||||
0x002B, /* Device */
|
||||
0, /* Crap (miniport) */
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
|
||||
0xE0, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
|
||||
{
|
||||
/* If you change the number of entries, change the IRQ_SLOT_COUNT above! */
|
||||
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
|
||||
{0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */
|
||||
{0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */
|
||||
{0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */
|
||||
{0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */
|
||||
{0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */
|
||||
{0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */
|
||||
{0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */
|
||||
}
|
||||
};
|
||||
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
return copy_pirq_routing_table(addr);
|
||||
}
|
||||
|
|
@ -0,0 +1,74 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
*
|
||||
* Based on mainboard.c from AMD's DB800 mainboard.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <stdint.h>
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include "chip.h"
|
||||
|
||||
static const u16 ec_init_table[] = { // hi=data, lo=index
|
||||
0x1900, // enable monitoring
|
||||
0x0351, // TMPIN1,2 diode mode, TMPIN3 off
|
||||
0x805C, // unlock zero adjust
|
||||
0x7056, 0x3C57, // zero adjust TMPIN1,2
|
||||
0x005C, // lock zero adjust
|
||||
0xD014 // also set FAN_CTL polarity to Active High
|
||||
};
|
||||
|
||||
static void init(struct device *dev)
|
||||
{
|
||||
struct mainboard_lippert_roadrunner_lx_config *mb = dev->chip_info;
|
||||
unsigned int gpio_base, i;
|
||||
printk_debug("LiPPERT RoadRunner-LX ENTER %s\n", __FUNCTION__);
|
||||
|
||||
/* Init CS5536 GPIOs */
|
||||
gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, 0),
|
||||
PCI_BASE_ADDRESS_1) - 1;
|
||||
outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD#
|
||||
outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD#
|
||||
outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM#
|
||||
outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM#
|
||||
outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED
|
||||
|
||||
/* Init Environment Controller */
|
||||
for (i=0; i<ARRAY_SIZE(ec_init_table); i++) {
|
||||
u16 val = ec_init_table[i];
|
||||
outb((u8)val, 0x0295); outb(val>>8, 0x0296);
|
||||
}
|
||||
|
||||
outb(mb->sio_gp1x_config, 0x1220); // Simple-I/O GP17-10
|
||||
printk_debug("LiPPERT RoadRunner-LX EXIT %s\n", __FUNCTION__);
|
||||
}
|
||||
|
||||
static void enable_dev(struct device *dev)
|
||||
{
|
||||
dev->ops->init = init;
|
||||
}
|
||||
|
||||
struct chip_operations mainboard_lippert_roadrunner_lx_ops = {
|
||||
CHIP_NAME("LiPPERT RoadRunner-LX Mainboard")
|
||||
.enable_dev = enable_dev,
|
||||
};
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
# Config file for the LiPPERT Cool RoadRunner-LX, --JR 10/2008
|
||||
# based on Config.lb for the AMD Geode LX/5536 DB800 platform.
|
||||
|
||||
target roadrunner-lx
|
||||
mainboard lippert/roadrunner-lx
|
||||
|
||||
# HACK to get the right TSC support.
|
||||
option CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
|
||||
|
||||
option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0
|
||||
option CONFIG_COMPRESSED_PAYLOAD_LZMA=0
|
||||
|
||||
## Load payload (e.g. Linux) from IDE.
|
||||
#option CONFIG_ROM_PAYLOAD=0
|
||||
#option CONFIG_IDE=1
|
||||
#option CONFIG_FS_PAYLOAD=1
|
||||
#option CONFIG_FS_EXT2=1
|
||||
#option AUTOBOOT_DELAY=0
|
||||
#option AUTOBOOT_CMDLINE="hda1:/payload.elf"
|
||||
|
||||
# Leave 36k for VSA. Usually board is equipped with a 512 KB FWH (LPC) flash,
|
||||
# however it can be replaced with a 1 MB chip.
|
||||
option ROM_SIZE=512*1024-36*1024
|
||||
#option ROM_SIZE=1024*1024-36*1024
|
||||
option FALLBACK_SIZE=ROM_SIZE
|
||||
|
||||
#option DEFAULT_CONSOLE_LOGLEVEL = 4
|
||||
#option MAXIMUM_CONSOLE_LOGLEVEL = 4
|
||||
|
||||
# Saves space on ROM_IMAGE_SIZE, but decompression costs a second on boot.
|
||||
option CONFIG_COMPRESS = 1
|
||||
|
||||
romimage "image"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option ROM_IMAGE_SIZE=64*1024
|
||||
option COREBOOT_EXTRA_VERSION=".0"
|
||||
payload ../payload.elf
|
||||
# If getting payload from IDE
|
||||
#payload /dev/null
|
||||
end
|
||||
|
||||
buildrom ./coreboot.rom ROM_SIZE "image"
|
||||
Loading…
Reference in New Issue