google/wizpig: add new board as variant of cyan baseboard
Add support for google/wizpig (white label Chromebook) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new wizpig variant - Add new shared SPD file to the baseboard Sourced from Chromium branch firmware-strago-7287.B, commit 02dc8db: Banon: 2nd source DDR memory (Micro-MT52L256M32D1PF) Change-Id: I424d2256eb79ca3ea0a62620954c57c09ae0c0b2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
This commit is contained in:
Matt DeVillier
Martin Roth
parent
94bc265b64
commit
f4dc596a38
|
|
@ -52,6 +52,7 @@ config VARIANT_DIR
|
||||||
default "setzer" if BOARD_GOOGLE_SETZER
|
default "setzer" if BOARD_GOOGLE_SETZER
|
||||||
default "terra" if BOARD_GOOGLE_TERRA
|
default "terra" if BOARD_GOOGLE_TERRA
|
||||||
default "ultima" if BOARD_GOOGLE_ULTIMA
|
default "ultima" if BOARD_GOOGLE_ULTIMA
|
||||||
|
default "wizpig" if BOARD_GOOGLE_WIZPIG
|
||||||
|
|
||||||
config MAINBOARD_PART_NUMBER
|
config MAINBOARD_PART_NUMBER
|
||||||
string
|
string
|
||||||
|
|
@ -65,6 +66,7 @@ config MAINBOARD_PART_NUMBER
|
||||||
default "Setzer" if BOARD_GOOGLE_SETZER
|
default "Setzer" if BOARD_GOOGLE_SETZER
|
||||||
default "Terra" if BOARD_GOOGLE_TERRA
|
default "Terra" if BOARD_GOOGLE_TERRA
|
||||||
default "Ultima" if BOARD_GOOGLE_ULTIMA
|
default "Ultima" if BOARD_GOOGLE_ULTIMA
|
||||||
|
default "Wizpig" if BOARD_GOOGLE_WIZPIG
|
||||||
|
|
||||||
config MAINBOARD_VENDOR
|
config MAINBOARD_VENDOR
|
||||||
string
|
string
|
||||||
|
|
@ -82,6 +84,8 @@ config DEVICETREE
|
||||||
default "variants/setzer/devicetree.cb" if BOARD_GOOGLE_SETZER
|
default "variants/setzer/devicetree.cb" if BOARD_GOOGLE_SETZER
|
||||||
default "variants/terra/devicetree.cb" if BOARD_GOOGLE_TERRA
|
default "variants/terra/devicetree.cb" if BOARD_GOOGLE_TERRA
|
||||||
default "variants/ultima/devicetree.cb" if BOARD_GOOGLE_ULTIMA
|
default "variants/ultima/devicetree.cb" if BOARD_GOOGLE_ULTIMA
|
||||||
|
default "variants/wizpig/devicetree.cb" if BOARD_GOOGLE_WIZPIG
|
||||||
|
|
||||||
|
|
||||||
config VGA_BIOS_FILE
|
config VGA_BIOS_FILE
|
||||||
string
|
string
|
||||||
|
|
@ -113,5 +117,6 @@ config GBB_HWID
|
||||||
default "SETZER TEST A-A 8721" if BOARD_GOOGLE_SETZER
|
default "SETZER TEST A-A 8721" if BOARD_GOOGLE_SETZER
|
||||||
default "TERRA TEST A-A 1650" if BOARD_GOOGLE_TERRA
|
default "TERRA TEST A-A 1650" if BOARD_GOOGLE_TERRA
|
||||||
default "ULTIMA TEST A-A 6017" if BOARD_GOOGLE_ULTIMA
|
default "ULTIMA TEST A-A 6017" if BOARD_GOOGLE_ULTIMA
|
||||||
|
default "WIZPIG TEST A-A 0597" if BOARD_GOOGLE_WIZPIG
|
||||||
|
|
||||||
endif # BOARD_GOOGLE_BASEBOARD_CYAN
|
endif # BOARD_GOOGLE_BASEBOARD_CYAN
|
||||||
|
|
|
||||||
|
|
@ -37,3 +37,7 @@ config BOARD_GOOGLE_TERRA
|
||||||
config BOARD_GOOGLE_ULTIMA
|
config BOARD_GOOGLE_ULTIMA
|
||||||
bool "Ultima"
|
bool "Ultima"
|
||||||
select BOARD_GOOGLE_BASEBOARD_CYAN
|
select BOARD_GOOGLE_BASEBOARD_CYAN
|
||||||
|
|
||||||
|
config BOARD_GOOGLE_WIZPIG
|
||||||
|
bool "Wizpig"
|
||||||
|
select BOARD_GOOGLE_BASEBOARD_CYAN
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,32 @@
|
||||||
|
91 20 F1 03 04 11 05 0B
|
||||||
|
03 11 01 08 0A 00 40 01
|
||||||
|
78 78 90 50 90 11 50 E0
|
||||||
|
10 04 3C 3C 01 90 00 00
|
||||||
|
00 00 00 00 00 00 00 A8
|
||||||
|
00 88 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 80 CE 01
|
||||||
|
00 00 55 00 00 00 00 00
|
||||||
|
4B 34 45 38 45 33 30 34
|
||||||
|
45 45 2D 45 47 43 45 20
|
||||||
|
20 20 00 00 80 CE 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
00 00 00 00 00 00 00 00
|
||||||
|
|
@ -0,0 +1,41 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2013 Google Inc.
|
||||||
|
## Copyright (C) 2015 Intel Corp.
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
romstage-y += spd_util.c
|
||||||
|
|
||||||
|
ramstage-y += gpio.c
|
||||||
|
|
||||||
|
SPD_BIN = $(obj)/spd.bin
|
||||||
|
|
||||||
|
SPD_SOURCES = samsung_2GiB_dimm_K4E8E304EE-EGCE
|
||||||
|
SPD_SOURCES += hynix_2GiB_dimm_H9CCNNN8GTMLAR-NUD
|
||||||
|
SPD_SOURCES += micron_2GiB_dimm_EDF8132A3MA-JD-F
|
||||||
|
SPD_SOURCES += samsung_2GiB_dimm_K4E8E324EB-EGCF
|
||||||
|
SPD_SOURCES += hynix_dimm_H9CCNNN8JTBLAR-NUD
|
||||||
|
|
||||||
|
SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex)
|
||||||
|
|
||||||
|
# Include spd ROM data
|
||||||
|
$(SPD_BIN): $(SPD_DEPS)
|
||||||
|
for f in $+; \
|
||||||
|
do for c in $$(cat $$f | grep -v ^#); \
|
||||||
|
do printf $$(printf '\%o' 0x$$c); \
|
||||||
|
done; \
|
||||||
|
done > $@
|
||||||
|
|
||||||
|
cbfs-files-y += spd.bin
|
||||||
|
spd.bin-file := $(SPD_BIN)
|
||||||
|
spd.bin-type := spd
|
||||||
|
|
@ -0,0 +1,6 @@
|
||||||
|
Vendor name: Google
|
||||||
|
Board name: Wizpig
|
||||||
|
Category: laptop
|
||||||
|
ROM protocol: SPI
|
||||||
|
ROM socketed: n
|
||||||
|
Flashrom support: y
|
||||||
|
|
@ -0,0 +1,151 @@
|
||||||
|
chip soc/intel/braswell
|
||||||
|
|
||||||
|
############################################################
|
||||||
|
# Set the parameters for MemoryInit
|
||||||
|
############################################################
|
||||||
|
|
||||||
|
register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
|
||||||
|
|
||||||
|
register "PcdMrcInitMmioSize" = "0x0800"
|
||||||
|
register "PcdMrcInitSpdAddr1" = "0xa0"
|
||||||
|
register "PcdMrcInitSpdAddr2" = "0xa2"
|
||||||
|
register "PcdIgdDvmt50PreAlloc" = "1"
|
||||||
|
register "PcdApertureSize" = "2"
|
||||||
|
register "PcdGttSize" = "1"
|
||||||
|
register "PcdDvfsEnable" = "1"
|
||||||
|
register "PcdCaMirrorEn" = "1"
|
||||||
|
|
||||||
|
############################################################
|
||||||
|
# Set the parameters for SiliconInit
|
||||||
|
############################################################
|
||||||
|
|
||||||
|
register "PcdSdcardMode" = "PCH_ACPI_MODE"
|
||||||
|
register "PcdEnableHsuart0" = "0"
|
||||||
|
register "PcdEnableHsuart1" = "1"
|
||||||
|
register "PcdEnableAzalia" = "1"
|
||||||
|
register "PcdEnableXhci" = "1"
|
||||||
|
register "PcdEnableLpe" = "1"
|
||||||
|
register "PcdEnableDma0" = "1"
|
||||||
|
register "PcdEnableDma1" = "1"
|
||||||
|
register "PcdEnableI2C0" = "1"
|
||||||
|
register "PcdEnableI2C1" = "1"
|
||||||
|
register "PcdEnableI2C2" = "0"
|
||||||
|
register "PcdEnableI2C3" = "0"
|
||||||
|
register "PcdEnableI2C4" = "1"
|
||||||
|
register "PcdEnableI2C5" = "1"
|
||||||
|
register "PcdEnableI2C6" = "0"
|
||||||
|
register "PunitPwrConfigDisable" = "0" # Enable SVID
|
||||||
|
register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
|
||||||
|
register "PcdEmmcMode" = "PCH_ACPI_MODE"
|
||||||
|
register "PcdUsb3ClkSsc" = "1"
|
||||||
|
register "PcdDispClkSsc" = "1"
|
||||||
|
register "PcdSataClkSsc" = "1"
|
||||||
|
register "PcdEnableSata" = "0" # Disable SATA
|
||||||
|
register "Usb2Port0PerPortPeTxiSet" = "7"
|
||||||
|
register "Usb2Port0PerPortTxiSet" = "0"
|
||||||
|
register "Usb2Port0IUsbTxEmphasisEn" = "2"
|
||||||
|
register "Usb2Port0PerPortTxPeHalf" = "1"
|
||||||
|
register "Usb2Port1PerPortPeTxiSet" = "7"
|
||||||
|
register "Usb2Port1PerPortTxiSet" = "0"
|
||||||
|
register "Usb2Port1IUsbTxEmphasisEn" = "2"
|
||||||
|
register "Usb2Port1PerPortTxPeHalf" = "1"
|
||||||
|
register "Usb2Port2PerPortPeTxiSet" = "7"
|
||||||
|
register "Usb2Port2PerPortTxiSet" = "0"
|
||||||
|
register "Usb2Port2IUsbTxEmphasisEn" = "2"
|
||||||
|
register "Usb2Port2PerPortTxPeHalf" = "1"
|
||||||
|
register "Usb2Port3PerPortPeTxiSet" = "7"
|
||||||
|
register "Usb2Port3PerPortTxiSet" = "0"
|
||||||
|
register "Usb2Port3IUsbTxEmphasisEn" = "2"
|
||||||
|
register "Usb2Port3PerPortTxPeHalf" = "1"
|
||||||
|
register "Usb2Port4PerPortPeTxiSet" = "7"
|
||||||
|
register "Usb2Port4PerPortTxiSet" = "3"
|
||||||
|
register "Usb2Port4IUsbTxEmphasisEn" = "2"
|
||||||
|
register "Usb2Port4PerPortTxPeHalf" = "1"
|
||||||
|
register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
|
||||||
|
register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
|
||||||
|
register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
|
||||||
|
register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
|
||||||
|
register "PcdSataInterfaceSpeed" = "3"
|
||||||
|
register "PcdPchSsicEnable" = "0"
|
||||||
|
register "PcdPchUsbHsicPort" = "0"
|
||||||
|
register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
|
||||||
|
register "PMIC_I2CBus" = "1"
|
||||||
|
register "ISPEnable" = "0" # Disable IUNIT
|
||||||
|
register "ISPPciDevConfig" = "3"
|
||||||
|
register "PcdSdDetectChk" = "0" # Disable SD card detect
|
||||||
|
register "I2C0Frequency" = "1"
|
||||||
|
register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
|
||||||
|
register "I2C2Frequency" = "1"
|
||||||
|
register "I2C3Frequency" = "1"
|
||||||
|
register "I2C4Frequency" = "1"
|
||||||
|
register "I2C5Frequency" = "1"
|
||||||
|
register "I2C6Frequency" = "1"
|
||||||
|
|
||||||
|
# LPE audio codec settings
|
||||||
|
register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
|
||||||
|
|
||||||
|
# Enable devices in ACPI mode
|
||||||
|
register "lpss_acpi_mode" = "1"
|
||||||
|
register "emmc_acpi_mode" = "1"
|
||||||
|
register "sd_acpi_mode" = "1"
|
||||||
|
register "lpe_acpi_mode" = "1"
|
||||||
|
|
||||||
|
# Disable SLP_X stretching after SUS power well fail.
|
||||||
|
register "disable_slp_x_stretch_sus_fail" = "1"
|
||||||
|
|
||||||
|
# Allow PCIe devices to wake system from suspend
|
||||||
|
register "pcie_wake_enable" = "1"
|
||||||
|
|
||||||
|
device cpu_cluster 0 on
|
||||||
|
device lapic 0 on end
|
||||||
|
end
|
||||||
|
device domain 0 on
|
||||||
|
# EDS Table 24-4, Figure 24-5
|
||||||
|
device pci 00.0 on end # 8086 2280 - SoC transaction router
|
||||||
|
device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
|
||||||
|
device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
|
||||||
|
device pci 0b.0 on end # 8086 22dc - ?
|
||||||
|
device pci 10.0 on end # 8086 2294 - MMC Port
|
||||||
|
device pci 11.0 off end # 8086 0F15 - SDIO Port
|
||||||
|
device pci 12.0 on end # 8086 0F16 - SD Port
|
||||||
|
device pci 13.0 off end # 8086 22a3 - Sata controller
|
||||||
|
device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
|
||||||
|
device pci 15.0 on end # 8086 22a8 - LP Engine Audio
|
||||||
|
device pci 16.0 off end # 8086 22b7 - USB device
|
||||||
|
device pci 18.0 on end # 8086 22c0 - SIO - DMA
|
||||||
|
device pci 18.1 on end # 8086 22c1 - I2C Port 1
|
||||||
|
device pci 18.2 on end # 8086 22c2 - I2C Port 2
|
||||||
|
device pci 18.3 off end # 8086 22c3 - I2C Port 3
|
||||||
|
device pci 18.4 off end # 8086 22c4 - I2C Port 4
|
||||||
|
device pci 18.5 on end # 8086 22c5 - I2C Port 5
|
||||||
|
device pci 18.6 on end # 8086 22c6 - I2C Port 6
|
||||||
|
device pci 18.7 off end # 8086 22c7 - I2C Port 7
|
||||||
|
device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
|
||||||
|
device pci 1b.0 on end # 8086 0F04 - HD Audio
|
||||||
|
device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
|
||||||
|
device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
|
||||||
|
device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
|
||||||
|
device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
|
||||||
|
device pci 1e.0 on end # 8086 2286 - SIO - DMA
|
||||||
|
device pci 1e.1 off end # 8086 0F08 - PWM 1
|
||||||
|
device pci 1e.2 off end # 8086 0F09 - PWM 2
|
||||||
|
device pci 1e.3 on end # 8086 228a - HSUART 1
|
||||||
|
device pci 1e.4 off end # 8086 228c - HSUART 2
|
||||||
|
device pci 1e.5 on end # 8086 228e - SPI 1
|
||||||
|
device pci 1e.6 off end # 8086 2290 - SPI 2
|
||||||
|
device pci 1e.7 off end # 8086 22ac - SPI 3
|
||||||
|
device pci 1f.0 on # 8086 229c - LPC bridge
|
||||||
|
chip drivers/pc80/tpm
|
||||||
|
# Rising edge interrupt
|
||||||
|
register "irq_polarity" = "2"
|
||||||
|
device pnp 0c31.0 on
|
||||||
|
irq 0x70 = 10
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip ec/google/chromeec
|
||||||
|
device pnp 0c09.0 on end
|
||||||
|
end
|
||||||
|
end # LPC Bridge
|
||||||
|
device pci 1f.3 off end # 8086 0F12 - SMBus 0
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,260 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2013 Google Inc.
|
||||||
|
* Copyright (C) 2015 Intel Corp.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <mainboard/google/cyan/irqroute.h>
|
||||||
|
#include <soc/gpio.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
|
||||||
|
/* South East Community */
|
||||||
|
static const struct soc_gpio_map gpse_gpio_map[] = {
|
||||||
|
Native_M1,/* MF_PLT_CLK0 */
|
||||||
|
GPIO_NC, /* 01 PWM1 */
|
||||||
|
GPIO_INPUT_NO_PULL, /* 02 MF_PLT_CLK1, RAMID2 */
|
||||||
|
GPIO_NC, /* 03 MF_PLT_CLK4 */
|
||||||
|
GPIO_NC, /* 04 MF_PLT_CLK3 */
|
||||||
|
GPIO_NC, /* PWM0 05 */
|
||||||
|
GPIO_NC, /* 06 MF_PLT_CLK5 */
|
||||||
|
GPIO_NC, /* 07 MF_PLT_CLK2 */
|
||||||
|
GPIO_NC, /* 15 SDMMC2_D3_CD_B */
|
||||||
|
Native_M1, /* 16 SDMMC1_CLK */
|
||||||
|
NATIVE_PU20K(1), /* 17 SDMMC1_D0 */
|
||||||
|
GPIO_NC, /* 18 SDMMC2_D1 */
|
||||||
|
GPIO_NC, /* 19 SDMMC2_CLK */
|
||||||
|
NATIVE_PU20K(1),/* 20 SDMMC1_D2 */
|
||||||
|
GPIO_NC, /* 21 SDMMC2_D2 */
|
||||||
|
GPIO_NC, /* 22 SDMMC2_CMD */
|
||||||
|
NATIVE_PU20K(1), /* 23 SDMMC1_CMD */
|
||||||
|
NATIVE_PU20K(1), /* 24 SDMMC1_D1 */
|
||||||
|
GPIO_NC, /* 25 SDMMC2_D0 */
|
||||||
|
NATIVE_PU20K(1), /* 26 SDMMC1_D3_CD_B */
|
||||||
|
NATIVE_PU20K(1), /* 30 SDMMC3_D1 */
|
||||||
|
Native_M1, /* 31 SDMMC3_CLK */
|
||||||
|
NATIVE_PU20K(1), /* 32 SDMMC3_D3 */
|
||||||
|
NATIVE_PU20K(1), /* 33 SDMMC3_D2 */
|
||||||
|
NATIVE_PU20K(1), /* 34 SDMMC3_CMD */
|
||||||
|
NATIVE_PU20K(1), /* 35 SDMMC3_D0 */
|
||||||
|
NATIVE_PU20K(1), /* 45 MF_LPC_AD2 */
|
||||||
|
Native_M1, /* 46 LPC_CLKRUNB */
|
||||||
|
NATIVE_PU20K(1), /* 47 MF_LPC_AD0 */
|
||||||
|
Native_M1, /* 48 LPC_FRAMEB */
|
||||||
|
Native_M1, /* 49 MF_LPC_CLKOUT1 */
|
||||||
|
NATIVE_PU20K(1), /* 50 MF_LPC_AD3 */
|
||||||
|
Native_M1, /* 51 MF_LPC_CLKOUT0 */
|
||||||
|
NATIVE_PU20K(1), /* 52 MF_LPC_AD1 */
|
||||||
|
Native_M1,/* SPI1_MISO */
|
||||||
|
Native_M1, /* 61 SPI1_CS0_B */
|
||||||
|
Native_M1, /* SPI1_CLK */
|
||||||
|
NATIVE_PU20K(1), /* 63 MMC1_D6 */
|
||||||
|
Native_M1, /* 62 SPI1_MOSI */
|
||||||
|
NATIVE_PU20K(1), /* 65 MMC1_D5 */
|
||||||
|
GPIO_NC, /* SPI1_CS1_B 66 */
|
||||||
|
NATIVE_PU20K(1), /* 67 MMC1_D4_SD_WE */
|
||||||
|
NATIVE_PU20K(1), /* 68 MMC1_D7 */
|
||||||
|
GPIO_NC, /* 69 MMC1_RCLK */
|
||||||
|
Native_M1, /* 75 GPO USB_OC1_B */
|
||||||
|
Native_M1, /* 76 PMU_RESETBUTTON_B */
|
||||||
|
GPI(trig_edge_both, L0, NA, non_maskable, en_edge_detect, NA , NA),
|
||||||
|
/* GPIO_ALERT 77 */
|
||||||
|
Native_M1, /* 78 SDMMC3_PWR_EN_B */
|
||||||
|
GPIO_NC, /* 79 GPI ILB_SERIRQ */
|
||||||
|
Native_M1, /* 80 USB_OC0_B */
|
||||||
|
NATIVE_INT_PU20K(1, L1), /* 81 SDMMC3_CD_B */
|
||||||
|
GPIO_NC, /* 82 spkr assumed gpio number */
|
||||||
|
Native_M1, /* 83 SUSPWRDNACK */
|
||||||
|
SPARE_PIN,/* 84 spare pin */
|
||||||
|
Native_M1, /* 85 SDMMC3_1P8_EN */
|
||||||
|
GPIO_END
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/* South West Community */
|
||||||
|
static const struct soc_gpio_map gpsw_gpio_map[] = {
|
||||||
|
GPIO_NC, /* 00 FST_SPI_D2 */
|
||||||
|
Native_M1, /* 01 FST_SPI_D0 */
|
||||||
|
Native_M1, /* 02 FST_SPI_CLK */
|
||||||
|
GPIO_NC, /* 03 FST_SPI_D3 */
|
||||||
|
GPIO_NC, /* GPO FST_SPI_CS1_B */
|
||||||
|
Native_M1, /* 05 FST_SPI_D1 */
|
||||||
|
Native_M1, /* 06 FST_SPI_CS0_B */
|
||||||
|
GPIO_INPUT_NO_PULL, /* 07 FST_SPI_CS2_B */
|
||||||
|
GPIO_NC, /* 15 UART1_RTS_B */
|
||||||
|
Native_M2, /* 16 UART1_RXD */
|
||||||
|
GPIO_NC, /* 17 UART2_RXD */
|
||||||
|
GPIO_NC, /* 18 UART1_CTS_B */
|
||||||
|
GPIO_NC, /* 19 UART2_RTS_B */
|
||||||
|
Native_M2, /* 20 UART1_TXD */
|
||||||
|
GPIO_NC, /* 21 UART2_TXD */
|
||||||
|
GPIO_NC, /* 22 UART2_CTS_B */
|
||||||
|
GPIO_NC, /* 30 MF_HDA_CLK */
|
||||||
|
GPIO_NC, /* 31 GPIO_SW31/MF_HDA_RSTB */
|
||||||
|
GPIO_NC, /* 32 GPIO_SW32 /MF_HDA_SDI0 */
|
||||||
|
GPIO_NC, /* 33 MF_HDA_SDO */
|
||||||
|
GPI(trig_edge_both, L3, P_1K_H, non_maskable, en_edge_detect, NA, NA),
|
||||||
|
/* 34 MF_HDA_DOCKRSTB */
|
||||||
|
GPIO_NC, /* 35 MF_HDA_SYNC */
|
||||||
|
GPIO_NC, /* 36 GPIO_SW36 MF_HDA_SDI1 */
|
||||||
|
GPI(trig_edge_both, L2, P_1K_H, non_maskable, en_edge_detect, NA, NA),
|
||||||
|
/* 37 MF_HDA_DOCKENB */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 45 I2C5_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 46 I2C4_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 47 I2C6_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 48 I2C5_SCL */
|
||||||
|
GPIO_NC, /* 49 I2C_NFC_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 50 I2C4_SCL */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 51 I2C6_SCL */
|
||||||
|
GPIO_NC, /* 52 I2C_NFC_SCL */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 60 I2C1_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 61 I2C0_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 62 I2C2_SDA */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 63 I2C1_SCL */
|
||||||
|
GPIO_INPUT_NO_PULL, /* 64 I2C3_SDA RAMID3*/
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 65 I2C0_SCL */
|
||||||
|
NATIVE_PU1K_CSEN_INVTX(1), /* 66 I2C2_SCL */
|
||||||
|
GPIO_INPUT_NO_PULL,/* 67 I2C3_SCL,RAMID1 */
|
||||||
|
GPIO_OUT_HIGH, /* 75 SATA_GP0 */
|
||||||
|
GPIO_NC, /* 76 GPI SATA_GP1 */
|
||||||
|
GPIO_INPUT_PU_20K, /* 77 SATA_LEDN */
|
||||||
|
GPIO_NC, /* 78 SATA_GP2 */
|
||||||
|
Native_M1, /* 79 NFC_DEV_WAKE , MF_SMB_CLK */
|
||||||
|
GPIO_INPUT_NO_PULL, /* 80 SATA_GP3,RAMID0 */
|
||||||
|
Native_M1, /* 81 NFC_DEV_WAKE , MF_SMB_CLK */
|
||||||
|
Native_M1, /* 82 NFC_FW_DOWNLOAD, MF_SMB_DATA */
|
||||||
|
/* Per DE request, change PCIE_CLKREQ0123B to GPIO_INPUT */
|
||||||
|
GPIO_NC, /* 90 PCIE_CLKREQ0B */
|
||||||
|
GPIO_NC, /* 91 GPI PCIE_CLKREQ1B/LTE_WAKE# */
|
||||||
|
Native_M1, /* 92 GP_SSP_2_CLK */
|
||||||
|
NATIVE_PU20K(1), /* 93 PCIE_CLKREQ2B/PCIE_CLKREQ_WLAN# */
|
||||||
|
Native_M1, /* 94 GP_SSP_2_RXD */
|
||||||
|
GPI(trig_edge_both, L1, P_5K_H, non_maskable, en_edge_detect, NA, NA),
|
||||||
|
/* 95 PCIE_CLKREQ3B/AUDIO_CODEC_IRQ */
|
||||||
|
Native_M1, /* 96 GP_SSP_2_FS */
|
||||||
|
NATIVE_FUNC(1, 0, inv_tx_enable), /* 97 GP_SSP_2f_TXD */
|
||||||
|
GPIO_END
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/* North Community */
|
||||||
|
static const struct soc_gpio_map gpn_gpio_map[] = {
|
||||||
|
GPIO_NC, /* 00 GPIO_DFX0 */
|
||||||
|
GPIO_NC, /* 01 GPIO_DFX3 */
|
||||||
|
GPIO_NC, /* 02 GPIO_DFX7 */
|
||||||
|
GPIO_NC, /* 03 GPIO_DFX1 */
|
||||||
|
GPIO_NC, /* 04 GPIO_DFX5 */
|
||||||
|
GPIO_NC, /* 05 GPIO_DFX4 */
|
||||||
|
GPIO_NC, /* 06 GPIO_DFX8 */
|
||||||
|
GPIO_NC, /* 07 GPIO_DFX2 */
|
||||||
|
GPIO_NC, /* 08 GPIO_DFX6 */
|
||||||
|
GPI(trig_edge_low, L8, NA, non_maskable, en_edge_rx_data ,
|
||||||
|
UNMASK_WAKE, SCI), /* 15 GPIO_SUS0 */
|
||||||
|
GPO_FUNC(NA, NA), /* 16 SEC_GPIO_SUS10 */
|
||||||
|
GPI(trig_edge_low, L0, P_1K_H, non_maskable, NA, NA, NA),
|
||||||
|
/* 17 GPIO_SUS3 */
|
||||||
|
GPI(trig_edge_low, L1, P_1K_H, non_maskable, NA, UNMASK_WAKE, NA),
|
||||||
|
/* 18 GPIO_SUS7 */
|
||||||
|
GPI(trig_edge_low, L3, P_1K_H, non_maskable, NA, UNMASK_WAKE, NA),
|
||||||
|
/* 19 GPIO_SUS1 */
|
||||||
|
GPIO_NC, /* 20 GPIO_SUS5 */
|
||||||
|
GPIO_INPUT_NO_PULL, /* 21 SEC_GPIO_SUS11 */
|
||||||
|
GPIO_NC, /* 22 GPIO_SUS4 */
|
||||||
|
GPIO_NC,
|
||||||
|
/* 23 SEC_GPIO_SUS8 */
|
||||||
|
Native_M6, /* 24 GPIO_SUS2 */
|
||||||
|
GPIO_INPUT_PU_5K,/* 25 GPIO_SUS6 */
|
||||||
|
Native_M1, /* 26 CX_PREQ_B */
|
||||||
|
GPIO_NC, /* 27 SEC_GPIO_SUS9 */
|
||||||
|
Native_M1, /* 30 TRST_B */
|
||||||
|
Native_M1, /* 31 TCK */
|
||||||
|
GPIO_SKIP, /* 32 PROCHOT_B */
|
||||||
|
GPIO_SKIP, /* 33 SVID0_DATA */
|
||||||
|
Native_M1, /* 34 TMS */
|
||||||
|
GPIO_NC, /* 35 CX_PRDY_B_2 */
|
||||||
|
GPIO_NC, /* 36 TDO_2 */
|
||||||
|
Native_M1, /* 37 CX_PRDY_B */
|
||||||
|
GPIO_SKIP, /* 38 SVID0_ALERT_B */
|
||||||
|
Native_M1, /* 39 TDO */
|
||||||
|
GPIO_SKIP, /* 40 SVID0_CLK */
|
||||||
|
Native_M1, /* 41 TDI */
|
||||||
|
Native_M2, /* 45 GP_CAMERASB05 */
|
||||||
|
Native_M2, /* 46 GP_CAMERASB02 */
|
||||||
|
Native_M2, /* 47 GP_CAMERASB08 */
|
||||||
|
Native_M2, /* 48 GP_CAMERASB00 */
|
||||||
|
Native_M2, /* 49 GP_CAMERASBO6 */
|
||||||
|
GPIO_NC, /* 50 GP_CAMERASB10 */
|
||||||
|
Native_M2, /* 51 GP_CAMERASB03 */
|
||||||
|
GPIO_NC, /* 52 GP_CAMERASB09 */
|
||||||
|
Native_M2, /* 53 GP_CAMERASB01 */
|
||||||
|
Native_M2, /* 54 GP_CAMERASB07 */
|
||||||
|
GPIO_NC, /* 55 GP_CAMERASB11 */
|
||||||
|
Native_M2, /* 56 GP_CAMERASB04 */
|
||||||
|
GPIO_NC, /* 60 PANEL0_BKLTEN */
|
||||||
|
GPIO_NC, /* 61 HV_DDI0_HPD */
|
||||||
|
NATIVE_PU1K_M1, /* 62 HV_DDI2_DDC_SDA */
|
||||||
|
Native_M1, /* 63 PANEL1_BKLTCTL */
|
||||||
|
NATIVE_TX_RX_EN, /* 64 HV_DDI1_HPD */
|
||||||
|
GPIO_NC, /* 65 PANEL0_BKLTCTL */
|
||||||
|
GPIO_NC, /* 66 HV_DDI0_DDC_SDA */
|
||||||
|
NATIVE_PU1K_M1, /* 67 HV_DDI2_DDC_SCL */
|
||||||
|
NATIVE_TX_RX_EN, /* 68 HV_DDI2_HPD */
|
||||||
|
Native_M1, /* 69 PANEL1_VDDEN */
|
||||||
|
Native_M1, /* 70 PANEL1_BKLTEN */
|
||||||
|
GPIO_NC, /* 71 HV_DDI0_DDC_SCL */
|
||||||
|
GPIO_NC, /* 72 PANEL0_VDDEN */
|
||||||
|
GPIO_END
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/* East Community */
|
||||||
|
static const struct soc_gpio_map gpe_gpio_map[] = {
|
||||||
|
Native_M1, /* 00 PMU_SLP_S3_B */
|
||||||
|
GPIO_NC, /* 01 PMU_BATLOW_B */
|
||||||
|
Native_M1, /* 02 SUS_STAT_B */
|
||||||
|
Native_M1, /* 03 PMU_SLP_S0IX_B */
|
||||||
|
Native_M1, /* 04 PMU_AC_PRESENT */
|
||||||
|
Native_M1, /* 05 PMU_PLTRST_B */
|
||||||
|
Native_M1, /* 06 PMU_SUSCLK */
|
||||||
|
GPIO_NC, /* 07 PMU_SLP_LAN_B */
|
||||||
|
Native_M1, /* 08 PMU_PWRBTN_B */
|
||||||
|
Native_M1, /* 09 PMU_SLP_S4_B */
|
||||||
|
NATIVE_FUNC(M1, P_1K_H, NA), /* 10 PMU_WAKE_B */
|
||||||
|
GPIO_NC, /* 11 PMU_WAKE_LAN_B */
|
||||||
|
GPIO_NC, /* 15 MF_GPIO_3 */
|
||||||
|
GPIO_NC, /* 16 MF_GPIO_7 */
|
||||||
|
GPIO_NC, /* 17 MF_I2C1_SCL */
|
||||||
|
GPIO_NC, /* 18 MF_GPIO_1 */
|
||||||
|
GPIO_NC, /* 19 MF_GPIO_5 */
|
||||||
|
GPIO_NC, /* 20 MF_GPIO_9 */
|
||||||
|
GPIO_NC, /* 21 MF_GPIO_0 */
|
||||||
|
GPIO_INPUT_PU_20K, /* 22 MF_GPIO_4 */
|
||||||
|
GPIO_NC, /* 23 MF_GPIO_8 */
|
||||||
|
GPIO_NC, /* 24 MF_GPIO_2 */
|
||||||
|
GPIO_NC, /* 25 MF_GPIO_6 */
|
||||||
|
GPIO_NC, /* 26 MF_I2C1_SDA */
|
||||||
|
GPIO_END
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static struct soc_gpio_config gpio_config = {
|
||||||
|
/* BSW */
|
||||||
|
.north = gpn_gpio_map,
|
||||||
|
.southeast = gpse_gpio_map,
|
||||||
|
.southwest = gpsw_gpio_map,
|
||||||
|
.east = gpe_gpio_map
|
||||||
|
};
|
||||||
|
|
||||||
|
struct soc_gpio_config *mainboard_get_gpios(void)
|
||||||
|
{
|
||||||
|
return &gpio_config;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,85 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Google Inc.
|
||||||
|
* Copyright (C) 2015 Intel Corp.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define DPTF_TSR0_SENSOR_ID 0
|
||||||
|
#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal"
|
||||||
|
#define DPTF_TSR0_PASSIVE 49
|
||||||
|
#define DPTF_TSR0_CRITICAL 75
|
||||||
|
|
||||||
|
|
||||||
|
#define DPTF_TSR1_SENSOR_ID 1
|
||||||
|
#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top"
|
||||||
|
#define DPTF_TSR1_PASSIVE 65
|
||||||
|
#define DPTF_TSR1_CRITICAL 85
|
||||||
|
|
||||||
|
#define DPTF_TSR2_SENSOR_ID 2
|
||||||
|
#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom"
|
||||||
|
#define DPTF_TSR2_PASSIVE 49
|
||||||
|
#define DPTF_TSR2_CRITICAL 75
|
||||||
|
|
||||||
|
|
||||||
|
#define DPTF_ENABLE_CHARGER
|
||||||
|
|
||||||
|
/* Charger performance states, board-specific values from charger and EC */
|
||||||
|
Name (CHPS, Package () {
|
||||||
|
Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */
|
||||||
|
Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */
|
||||||
|
Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */
|
||||||
|
Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */
|
||||||
|
Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0.0A */
|
||||||
|
})
|
||||||
|
|
||||||
|
/* Mainboard specific _PDL is 1GHz */
|
||||||
|
Name (MPDL, 8)
|
||||||
|
|
||||||
|
Name (DTRT, Package () {
|
||||||
|
/* CPU Throttle Effect on CPU */
|
||||||
|
Package () { \_SB.PCI0.B0DB, \_SB.PCI0.B0DB, 100, 50, 0, 0, 0, 0 },
|
||||||
|
|
||||||
|
/* CPU Effect on Temp Sensor 0 */
|
||||||
|
Package () { \_SB.PCI0.B0DB, \_SB.DPTF.TSR0, 100, 100, 0, 0, 0, 0 },
|
||||||
|
#ifdef DPTF_ENABLE_CHARGER
|
||||||
|
/* Charger Effect on Temp Sensor 1 */
|
||||||
|
Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 },
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* CPU Effect on Temp Sensor 1 */
|
||||||
|
Package () { \_SB.PCI0.B0DB, \_SB.DPTF.TSR1, 100, 600, 0, 0, 0, 0 },
|
||||||
|
|
||||||
|
/* CPU Effect on Temp Sensor 2 */
|
||||||
|
Package () { \_SB.PCI0.B0DB, \_SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 },
|
||||||
|
})
|
||||||
|
|
||||||
|
Name (MPPC, Package ()
|
||||||
|
{
|
||||||
|
0x2, /* Revision */
|
||||||
|
Package () { /* Power Limit 1 */
|
||||||
|
0, /* PowerLimitIndex, 0 for Power Limit 1 */
|
||||||
|
3100, /* PowerLimitMinimum */
|
||||||
|
6200, /* PowerLimitMaximum */
|
||||||
|
1000, /* TimeWindowMinimum */
|
||||||
|
1000, /* TimeWindowMaximum */
|
||||||
|
200 /* StepSize */
|
||||||
|
},
|
||||||
|
Package () { /* Power Limit 2 */
|
||||||
|
1, /* PowerLimitIndex, 1 for Power Limit 2 */
|
||||||
|
8000, /* PowerLimitMinimum */
|
||||||
|
8000, /* PowerLimitMaximum */
|
||||||
|
1000, /* TimeWindowMinimum */
|
||||||
|
1000, /* TimeWindowMaximum */
|
||||||
|
1000 /* StepSize */
|
||||||
|
}
|
||||||
|
})
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Matt DeVillier
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Elan touchscreen */
|
||||||
|
#include <acpi/touchscreen_elan.asl>
|
||||||
|
|
||||||
|
/* Elan trackpad */
|
||||||
|
#include <acpi/trackpad_elan.asl>
|
||||||
|
|
||||||
|
/* Realtek audio codec */
|
||||||
|
#include <acpi/codec_realtek.asl>
|
||||||
|
|
@ -0,0 +1,68 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2013 Google Inc.
|
||||||
|
* Copyright (C) 2015 Intel Corp.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef ONBOARD_H
|
||||||
|
#define ONBOARD_H
|
||||||
|
|
||||||
|
#include <mainboard/google/cyan/irqroute.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Calculation of gpio based irq.
|
||||||
|
* Gpio banks ordering : GPSW, GPNC, GPEC, GPSE
|
||||||
|
* Max direct irq (MAX_DIRECT_IRQ) is 114.
|
||||||
|
* Size of gpio banks are
|
||||||
|
* GPSW_SIZE = 98
|
||||||
|
* GPNC_SIZE = 73
|
||||||
|
* GPEC_SIZE = 27
|
||||||
|
* GPSE_SIZE = 86
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BOARD_TOUCH_IRQ 184
|
||||||
|
|
||||||
|
/* KBD: Gpio index in N bank */
|
||||||
|
#define BOARD_I8042_GPIO_INDEX 17
|
||||||
|
/* Audio: Gpio index in SW bank */
|
||||||
|
#define JACK_DETECT_GPIO_INDEX 95
|
||||||
|
/* SCI: Gpio index in N bank */
|
||||||
|
#define BOARD_SCI_GPIO_INDEX 15
|
||||||
|
/* Trackpad: Gpio index in N bank */
|
||||||
|
#define BOARD_TRACKPAD_GPIO_INDEX 18
|
||||||
|
|
||||||
|
#define BOARD_TRACKPAD_NAME "trackpad"
|
||||||
|
#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1)
|
||||||
|
#define BOARD_TRACKPAD_I2C_BUS 5
|
||||||
|
#define BOARD_TRACKPAD_I2C_ADDR 0x15
|
||||||
|
|
||||||
|
#define BOARD_TOUCHSCREEN_NAME "touchscreen"
|
||||||
|
#define BOARD_TOUCHSCREEN_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(2)
|
||||||
|
#define BOARD_TOUCHSCREEN_I2C_BUS 0
|
||||||
|
#define BOARD_TOUCHSCREEN_I2C_ADDR 0x10
|
||||||
|
|
||||||
|
/* SD CARD gpio */
|
||||||
|
#define SDCARD_CD 81
|
||||||
|
|
||||||
|
#define AUDIO_CODEC_HID "10EC5650"
|
||||||
|
#define AUDIO_CODEC_CID "10EC5650"
|
||||||
|
#define AUDIO_CODEC_DDN "RTEK Codec Controller"
|
||||||
|
#define AUDIO_CODEC_I2C_ADDR 0x1A
|
||||||
|
|
||||||
|
#define DPTF_CPU_PASSIVE 88
|
||||||
|
#define DPTF_CPU_CRITICAL 90
|
||||||
|
|
||||||
|
/* I2C data hold time */
|
||||||
|
#define BOARD_I2C6_DATA_HOLD_TIME 0x28
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,66 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2013 Google Inc.
|
||||||
|
* Copyright (C) 2015 Intel Corp.
|
||||||
|
* Copyright (C) 2017 Matt DeVillier
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <mainboard/google/cyan/spd/spd_util.h>
|
||||||
|
|
||||||
|
/* We use RAM_ID3 to indicate dual channel config.
|
||||||
|
*
|
||||||
|
* 0b0000 - 2GiB total - 1 x 2GiB Samsung K4E8E304EE-EGCE 1600MHz
|
||||||
|
* 0b0001 - 2GiB total - 1 x 2GiB Hynix H9CCNNN8GTMLAR-NUD 1600MHz
|
||||||
|
* 0b0010 - 2GiB total - 1 x 2GiB Micron EDF8132A3MA-JD-F 1600MHz
|
||||||
|
* 0b0011 - 2GiB total - 1 x 2GiB Samsung K4E8E324EB-EGCF 1600MHz
|
||||||
|
* 0b0100 - 2GiB total - 1 x 2GiB Hynix H9CCNNN8JTBLAR-NUD 1866MHz
|
||||||
|
*
|
||||||
|
* 0b1000 - 4GiB total - 2 x 2GiB Samsung K4E8E304EE-EGCE 1600MHz
|
||||||
|
* 0b1001 - 4GiB total - 2 x 2GiB Hynix H9CCNNN8GTMLAR-NUD 1600MHz
|
||||||
|
* 0b1010 - 4GiB total - 2 x 2GiB Micron EDF8132A3MA-JD-F 1600MHz
|
||||||
|
* 0b1011 - 4GiB total - 2 x 2GiB Samsung K4E8E324EB-EGCF 1600MHz
|
||||||
|
* 0b1100 - 4GiB total - 2 x 2GiB Hynix H9CCNNN8JTBLAR-NUD 1866MHz
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
int get_variant_spd_index(int ram_id, int *dual)
|
||||||
|
{
|
||||||
|
int spd_index = ram_id & 0x7;
|
||||||
|
|
||||||
|
/* Determine if single or dual channel memory system */
|
||||||
|
/* RAMID3 is deterministic for ultima */
|
||||||
|
*dual = !!(ram_id & (1<<3));
|
||||||
|
|
||||||
|
/* Display the RAM type */
|
||||||
|
printk(BIOS_DEBUG, *dual ? "4GiB " : "2GiB ");
|
||||||
|
switch (spd_index) {
|
||||||
|
case 0:
|
||||||
|
printk(BIOS_DEBUG, "Samsung K4E8E304EE-EGCE\n");
|
||||||
|
break;
|
||||||
|
case 1:
|
||||||
|
printk(BIOS_DEBUG, "Hynix H9CCNNN8GTMLAR-NUD\n");
|
||||||
|
break;
|
||||||
|
case 2:
|
||||||
|
printk(BIOS_DEBUG, "Micron EDF8132A3MA-JD-F\n");
|
||||||
|
break;
|
||||||
|
case 3:
|
||||||
|
printk(BIOS_DEBUG, "Samsung K4E8E324EB-EGCF\n");
|
||||||
|
break;
|
||||||
|
case 4:
|
||||||
|
printk(BIOS_DEBUG, "Hynix H9CCNNN8JTBLAR-NUD\n");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return spd_index;
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue