diff --git a/src/southbridge/winbond/w83c553/w83c553f.c b/src/southbridge/winbond/w83c553/w83c553f.c new file mode 100644 index 0000000000..699089200f --- /dev/null +++ b/src/southbridge/winbond/w83c553/w83c553f.c @@ -0,0 +1,285 @@ +/* + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH + * Andreas Heppel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Initialisation of the PCI-to-ISA bridge and disabling the BIOS + * write protection (for flash) in function 0 of the chip. + * Enabling function 1 (IDE controller of the chip. + */ + +#include +#include +#include +#include +#include "w83c553f.h" + +#ifndef CONFIG_ISA_MEM +#define CONFIG_ISA_MEM 0xFD000000 +#endif +#ifndef CONFIG_ISA_IO +#define CONFIG_ISA_IO 0xFE000000 +#endif + +#ifndef CONFIG_IDE_MAXBUS +#define CONFIG_IDE_MAXBUS 2 +#endif +#ifndef CONFIG_IDE_MAXDEVICE +#define CONFIG_IDE_MAXDEVICE (CONFIG_IDE_MAXBUS*2) +#endif + +u32 ide_bus_offset[CONFIG_IDE_MAXBUS]; + +void initialise_pic(void); +void initialise_dma(void); + +extern struct pci_ops pci_direct_ppc; + +void southbridge_early_init(void) +{ + unsigned char reg8; + + /* + * Set ISA memory space + */ + pci_direct_ppc.read_byte(0, 0x58, W83C553F_IPADCR, ®8); + /* 16 MB ISA memory space */ + reg8 |= (W83C553F_IPADCR_IPATOM4 | W83C553F_IPADCR_IPATOM5 | W83C553F_IPADCR_IPATOM6 | W83C553F_IPADCR_IPATOM7); + reg8 &= ~W83C553F_IPADCR_MBE512; + pci_direct_ppc.write_byte(0, 0x58, W83C553F_IPADCR, ®8); +} + +void southbridge_init(void) +{ + struct pci_dev *devbusfn; + unsigned char reg8; + unsigned short reg16; + unsigned int reg32; + + devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0); + if (devbusfn == 0) + { + printk_info("Error: Cannot find W83C553F controller on any PCI bus\n"); + return; + } + + printk_info("Found W83C553F controller\n"); + + /* always enabled */ +#if 0 + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(devbusfn, PCI_COMMAND, reg16); +#endif + + /* + * Set ISA memory space + */ + pci_read_config_byte(devbusfn, W83C553F_IPADCR, ®8); + /* 16 MB ISA memory space */ + reg8 |= (W83C553F_IPADCR_IPATOM4 | W83C553F_IPADCR_IPATOM5 | W83C553F_IPADCR_IPATOM6 | W83C553F_IPADCR_IPATOM7); + reg8 &= ~W83C553F_IPADCR_MBE512; + pci_write_config_byte(devbusfn, W83C553F_IPADCR, reg8); + + /* + * Chip select: switch off BIOS write protection + */ + pci_read_config_byte(devbusfn, W83C553F_CSCR, ®8); + reg8 |= W83C553F_CSCR_UBIOSCSE; + reg8 &= ~W83C553F_CSCR_BIOSWP; + pci_write_config_byte(devbusfn, W83C553F_CSCR, reg8); + + + /* + * Enable Port 92 + */ + reg8 = W83C553F_ATSCR_P92E | W83C553F_ATSCR_KRCEE; + pci_write_config_byte(devbusfn, W83C553F_CSCR, reg8); + + /* + * Route IDE interrupts to IRQ 14 & 15 on 8259. + */ + pci_write_config_byte(devbusfn, W83C553F_IDEIRCR, 0xef); + pci_write_config_word(devbusfn, W83C553F_PCIIRCR, 0x0000); + + /* + * Read IDE bus offsets from function 1 device. + * We must unmask the LSB indicating that it is an IO address. + */ + devbusfn = pci_find_device(W83C553F_VID, W83C553F_IDE, 0); + if (devbusfn == 0) + { + printk_info("Error: Cannot find W83C553F function 1 device\n"); + return; + } + + /* + * Enable native mode on IDE ports and set base address. + */ + reg8 = W83C553F_PIR_P1NL | W83C553F_PIR_P0NL; + pci_write_config_byte(devbusfn, W83C553F_PIR, reg8); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_0, 0xffffffff); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_0, 0x1f0); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_1, 0xffffffff); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_1, 0x3f6); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_2, 0xffffffff); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_2, 0x170); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_3, 0xffffffff); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_3, ®32); + pci_write_config_dword(devbusfn, PCI_BASE_ADDRESS_3, 0x376); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_3, ®32); + + /* + * Set read-ahead duration to 0xff + * Enable P0 and P1 + */ + reg32 = 0x00ff0000 | W83C553F_IDECSR_P1EN | W83C553F_IDECSR_P0EN; + pci_write_config_dword(devbusfn, W83C553F_IDECSR, reg32); + pci_read_config_dword(devbusfn, W83C553F_IDECSR, ®32); + + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]); + printk_debug("ide bus offset = 0x%x\n", ide_bus_offset[0]); + ide_bus_offset[0] &= ~1; +#if CONFIG_IDE_MAXBUS > 1 + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]); + ide_bus_offset[1] &= ~1; +#endif + + /* + * Enable function 1, IDE -> busmastering and IO space access + */ + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; + pci_write_config_word(devbusfn, PCI_COMMAND, reg16); + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + + /* + * Initialise ISA interrupt controller + */ + initialise_pic(); + + /* + * Initialise DMA controller + */ + initialise_dma(); + + printk_info("W83C553F configuration complete\n"); +} + +void initialise_pic(void) +{ + outb(W83C553F_PIC1_ICW1, 0x11); /* start init sequence, ICW4 needed */ + outb(W83C553F_PIC1_ICW2, 0x08); /* base address 00001 */ + outb(W83C553F_PIC1_ICW3, 0x04); /* slave on IRQ2 */ + outb(W83C553F_PIC1_ICW4, 0x01); /* x86 mode */ + outb(W83C553F_PIC1_OCW1, 0xfb); /* enable IRQ 2 */ + outb(W83C553F_PIC1_ELC, 0xf8); /* all IRQ's edge sensitive */ + + outb(W83C553F_PIC2_ICW1, 0x11); /* start init sequence, ICW4 needed */ + outb(W83C553F_PIC2_ICW2, 0x08); /* base address 00001 */ + outb(W83C553F_PIC2_ICW3, 0x02); /* slave ID 2 */ + outb(W83C553F_PIC2_ICW4, 0x01); /* x86 mode */ + outb(W83C553F_PIC2_OCW1, 0xff); /* disable all IRQ's */ + outb(W83C553F_PIC2_ELC, 0xde); /* all IRQ's edge sensitive */ + + outb(W83C553F_TMR1_CMOD, 0x74); + + outb(W83C553F_PIC2_OCW1, 0x20); + outb(W83C553F_PIC1_OCW1, 0x20); + + outb(W83C553F_PIC2_OCW1, 0x2b); + outb(W83C553F_PIC1_OCW1, 0x2b); +} + +void initialise_dma(void) +{ + unsigned int channel; + unsigned int rvalue1, rvalue2; + + /* perform a H/W reset of the devices */ + + outb(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); + outw(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); + + /* initialise all channels to a sane state */ + + for (channel = 0; channel < 4; channel++) { + /* + * dependent upon the channel, setup the specifics: + * + * demand + * address-increment + * autoinitialize-disable + * verify-transfer + */ + + switch (channel) { + case 0: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); + break; + case 1: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); + break; + case 2: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); + break; + case 3: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); + break; + default: + rvalue1 = 0x00; + rvalue2 = 0x00; + break; + } + + /* write to write mode registers */ + + outb(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); + outw(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); + } + + /* enable all channels */ + + outb(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); + outw(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); + /* + * initialize the global DMA configuration + * + * DACK# active low + * DREQ active high + * fixed priority + * channel group enable + */ + + outb(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); + outw(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); +} diff --git a/src/southbridge/winbond/w83c553/w83c553f.h b/src/southbridge/winbond/w83c553/w83c553f.h new file mode 100644 index 0000000000..f071371938 --- /dev/null +++ b/src/southbridge/winbond/w83c553/w83c553f.h @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2000 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + /* winbond access routines and defines*/ + +/* from the winbond data sheet - + The W83C553F SIO controller with PCI arbiter is a multi-function PCI device. + Function 0 is the ISA bridge, and Function 1 is the bus master IDE controller. +*/ + +/*ISA bridge configuration space*/ + +#define W83C553F_VID 0x10AD +#define W83C553F_DID 0x0565 +#define W83C553F_IDE 0x0105 + +/* Function 0 registers */ +#define W83C553F_PCICONTR 0x40 /*pci control reg*/ +#define W83C553F_SGBAR 0x41 /*scatter/gather base address reg*/ +#define W83C553F_LBCR 0x42 /*Line Buffer Control reg*/ +#define W83C553F_IDEIRCR 0x43 /*IDE Interrupt Routing Control Reg*/ +#define W83C553F_PCIIRCR 0x44 /*PCI Interrupt Routing Control Reg*/ +#define W83C553F_BTBAR 0x46 /*BIOS Timer Base Address Register*/ +#define W83C553F_IPADCR 0x48 /*ISA to PCI Address Decoder Control Register*/ +#define W83C553F_IRADCR 0x49 /*ISA ROM Address Decoder Control Register*/ +#define W83C553F_IPMHSAR 0x4a /*ISA to PCI Memory Hole STart Address Register*/ +#define W83C553F_IPMHSR 0x4b /*ISA to PCI Memory Hols Size Register*/ +#define W83C553F_CDR 0x4c /*Clock Divisor Register*/ +#define W83C553F_CSCR 0x4d /*Chip Select Control Register*/ +#define W83C553F_ATSCR 0x4e /*AT System Control register*/ +#define W83C553F_ATBCR 0x4f /*AT Bus ControL Register*/ +#define W83C553F_IRQBEE0R 0x60 /*IRQ Break Event Enable 0 Register*/ +#define W83C553F_IRQBEE1R 0x61 /*IRQ Break Event Enable 1 Register*/ +#define W83C553F_ABEER 0x62 /*Additional Break Event Enable Register*/ +#define W83C553F_DMABEER 0x63 /*DMA Break Event Enable Register*/ + +/* Function 1 registers */ +#define W83C553F_PIR 0x09 /*Programming Interface Register*/ +#define W83C553F_IDECSR 0x40 /*IDE Control/Status Register*/ + +/* register bit definitions */ +#define W83C553F_IPADCR_MBE512 0x1 +#define W83C553F_IPADCR_MBE640 0x2 +#define W83C553F_IPADCR_IPATOM4 0x10 +#define W83C553F_IPADCR_IPATOM5 0x20 +#define W83C553F_IPADCR_IPATOM6 0x40 +#define W83C553F_IPADCR_IPATOM7 0x80 + +#define W83C553F_CSCR_UBIOSCSE 0x10 +#define W83C553F_CSCR_BIOSWP 0x20 + +#define W83C553F_IDECSR_P0EN 0x01 +#define W83C553F_IDECSR_P0F16 0x02 +#define W83C553F_IDECSR_P1EN 0x10 +#define W83C553F_IDECSR_P1F16 0x20 +#define W83C553F_IDECSR_LEGIRQ 0x800 + +#define W83C553F_ATSCR_ISARE 0x40 +#define W83C553F_ATSCR_FERRE 0x10 +#define W83C553F_ATSCR_P92E 0x04 +#define W83C553F_ATSCR_KRCEE 0x02 +#define W83C553F_ATSCR_KGA20EE 0x01 + +#define W83C553F_PIR_BM 0x80 +#define W83C553F_PIR_P1PROG 0x08 +#define W83C553F_PIR_P1NL 0x04 +#define W83C553F_PIR_P0PROG 0x02 +#define W83C553F_PIR_P0NL 0x01 + +/* + * Interrupt controller + */ +#define W83C553F_PIC1_ICW1 CONFIG_ISA_IO + 0x20 +#define W83C553F_PIC1_ICW2 CONFIG_ISA_IO + 0x21 +#define W83C553F_PIC1_ICW3 CONFIG_ISA_IO + 0x21 +#define W83C553F_PIC1_ICW4 CONFIG_ISA_IO + 0x21 +#define W83C553F_PIC1_OCW1 CONFIG_ISA_IO + 0x21 +#define W83C553F_PIC1_OCW2 CONFIG_ISA_IO + 0x20 +#define W83C553F_PIC1_OCW3 CONFIG_ISA_IO + 0x20 +#define W83C553F_PIC1_ELC CONFIG_ISA_IO + 0x4D0 +#define W83C553F_PIC2_ICW1 CONFIG_ISA_IO + 0xA0 +#define W83C553F_PIC2_ICW2 CONFIG_ISA_IO + 0xA1 +#define W83C553F_PIC2_ICW3 CONFIG_ISA_IO + 0xA1 +#define W83C553F_PIC2_ICW4 CONFIG_ISA_IO + 0xA1 +#define W83C553F_PIC2_OCW1 CONFIG_ISA_IO + 0xA1 +#define W83C553F_PIC2_OCW2 CONFIG_ISA_IO + 0xA0 +#define W83C553F_PIC2_OCW3 CONFIG_ISA_IO + 0xA0 +#define W83C553F_PIC2_ELC CONFIG_ISA_IO + 0x4D1 + +#define W83C553F_TMR1_CMOD CONFIG_ISA_IO + 0x43 + +/* + * DMA controller + */ +#define W83C553F_DMA1 CONFIG_ISA_IO + 0x000 /* channel 0 - 3 */ +#define W83C553F_DMA2 CONFIG_ISA_IO + 0x0C0 /* channel 4 - 7 */ + +/* command/status register bit definitions */ + +#define W83C553F_CS_COM_DACKAL (1<<7) /* DACK# assert level */ +#define W83C553F_CS_COM_DREQSAL (1<<6) /* DREQ sense assert level */ +#define W83C553F_CS_COM_GAP (1<<4) /* group arbitration priority */ +#define W83C553F_CS_COM_CGE (1<<2) /* channel group enable */ + +#define W83C553F_CS_STAT_CH0REQ (1<<4) /* channel 0 (4) DREQ status */ +#define W83C553F_CS_STAT_CH1REQ (1<<5) /* channel 1 (5) DREQ status */ +#define W83C553F_CS_STAT_CH2REQ (1<<6) /* channel 2 (6) DREQ status */ +#define W83C553F_CS_STAT_CH3REQ (1<<7) /* channel 3 (7) DREQ status */ + +#define W83C553F_CS_STAT_CH0TC (1<<0) /* channel 0 (4) TC status */ +#define W83C553F_CS_STAT_CH1TC (1<<1) /* channel 1 (5) TC status */ +#define W83C553F_CS_STAT_CH2TC (1<<2) /* channel 2 (6) TC status */ +#define W83C553F_CS_STAT_CH3TC (1<<3) /* channel 3 (7) TC status */ + +/* mode register bit definitions */ + +#define W83C553F_MODE_TM_DEMAND (0<<6) /* transfer mode - demand */ +#define W83C553F_MODE_TM_SINGLE (1<<6) /* transfer mode - single */ +#define W83C553F_MODE_TM_BLOCK (2<<6) /* transfer mode - block */ +#define W83C553F_MODE_TM_CASCADE (3<<6) /* transfer mode - cascade */ +#define W83C553F_MODE_ADDRDEC (1<<5) /* address increment/decrement select */ +#define W83C553F_MODE_AUTOINIT (1<<4) /* autoinitialize enable */ +#define W83C553F_MODE_TT_VERIFY (0<<2) /* transfer type - verify */ +#define W83C553F_MODE_TT_WRITE (1<<2) /* transfer type - write */ +#define W83C553F_MODE_TT_READ (2<<2) /* transfer type - read */ +#define W83C553F_MODE_TT_ILLEGAL (3<<2) /* transfer type - illegal */ +#define W83C553F_MODE_CH0SEL (0<<0) /* channel 0 (4) select */ +#define W83C553F_MODE_CH1SEL (1<<0) /* channel 1 (5) select */ +#define W83C553F_MODE_CH2SEL (2<<0) /* channel 2 (6) select */ +#define W83C553F_MODE_CH3SEL (3<<0) /* channel 3 (7) select */ + +/* request register bit definitions */ + +#define W83C553F_REQ_CHSERREQ (1<<2) /* channel service request */ +#define W83C553F_REQ_CH0SEL (0<<0) /* channel 0 (4) select */ +#define W83C553F_REQ_CH1SEL (1<<0) /* channel 1 (5) select */ +#define W83C553F_REQ_CH2SEL (2<<0) /* channel 2 (6) select */ +#define W83C553F_REQ_CH3SEL (3<<0) /* channel 3 (7) select */ + +/* write single mask bit register bit definitions */ + +#define W83C553F_WSMB_CHMASKSEL (1<<2) /* channel mask select */ +#define W83C553F_WSMB_CH0SEL (0<<0) /* channel 0 (4) select */ +#define W83C553F_WSMB_CH1SEL (1<<0) /* channel 1 (5) select */ +#define W83C553F_WSMB_CH2SEL (2<<0) /* channel 2 (6) select */ +#define W83C553F_WSMB_CH3SEL (3<<0) /* channel 3 (7) select */ + +/* read/write all mask bits register bit definitions */ + +#define W83C553F_RWAMB_CH0MASK (1<<0) /* channel 0 (4) mask */ +#define W83C553F_RWAMB_CH1MASK (1<<1) /* channel 1 (5) mask */ +#define W83C553F_RWAMB_CH2MASK (1<<2) /* channel 2 (6) mask */ +#define W83C553F_RWAMB_CH3MASK (1<<3) /* channel 3 (7) mask */ + +/* typedefs */ + +#define W83C553F_DMA1_CS 0x8 +#define W83C553F_DMA1_WR 0x9 +#define W83C553F_DMA1_WSMB 0xA +#define W83C553F_DMA1_WM 0xB +#define W83C553F_DMA1_CBP 0xC +#define W83C553F_DMA1_MC 0xD +#define W83C553F_DMA1_CM 0xE +#define W83C553F_DMA1_RWAMB 0xF + +#define W83C553F_DMA2_CS 0xD0 +#define W83C553F_DMA2_WR 0xD2 +#define W83C553F_DMA2_WSMB 0xD4 +#define W83C553F_DMA2_WM 0xD6 +#define W83C553F_DMA2_CBP 0xD8 +#define W83C553F_DMA2_MC 0xDA +#define W83C553F_DMA2_CM 0xDC +#define W83C553F_DMA2_RWAMB 0xDE + +void initialise_w83c553f(void); diff --git a/src/superio/NSC/pc97307/superio.c b/src/superio/NSC/pc97307/superio.c new file mode 100644 index 0000000000..0a04806a8b --- /dev/null +++ b/src/superio/NSC/pc97307/superio.c @@ -0,0 +1,47 @@ +/* $Id$ */ +/* Copyright 2000 AG Electronics Ltd. */ +/* This code is distributed without warranty under the GPL v2 (see COPYING) */ + +#include +#include +#include +#include +#include + +#ifndef PNP_INDEX_REG +#define PNP_INDEX_REG 0x15C +#endif +#ifndef PNP_DATA_REG +#define PNP_DATA_REG 0x15D +#endif +#ifndef SIO_COM1 +#define SIO_COM1_BASE 0x3F8 +#endif +#ifndef SIO_COM2 +#define SIO_COM2_BASE 0x2F8 +#endif + +void pnp_output(char address, char data) +{ + outb(address, PNP_INDEX_REG); + outb(data, PNP_DATA_REG); +} + +void sio_enable(void) +{ + /* Enable Super IO Chip */ + pnp_output(0x07, 6); /* LD 6 = UART1 */ + pnp_output(0x30, 0); /* Dectivate */ + pnp_output(0x60, SIO_COM1_BASE >> 8); /* IO Base */ + pnp_output(0x61, SIO_COM1_BASE & 0xFF); /* IO Base */ + pnp_output(0x30, 1); /* Activate */ +} + +struct superio_control superio_NSC_pc97307_control = { + pre_pci_init: (void *)0, + init: (void *)0, + finishup: (void *)0, + defaultport: SIO_COM1_BASE, + name: "NSC 87307" +}; +