mb/portwell/m107: Add Kingston memory support

Add support for board revision 1.3 containing Kingston memory.

BUG=N/A
TEST=tested on portwell m107 module

Change-Id: I436698ee079952580c764e840ee0ad2e18ea8d3b
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
This commit is contained in:
Wim Vervoorn 2019-10-31 10:13:17 +01:00 committed by Patrick Georgi
parent 34bc60b865
commit f6671a89c5
5 changed files with 272 additions and 3 deletions

View File

@ -4,9 +4,10 @@ This page describes how to run coreboot on the [Portwell PQ7-M107].
PQ7-M107 are assembled with different onboard memory modules:
Rev 1.0 Onboard Samsung K4B8G1646D-MYKO memory
Rev 1.1 and 1.2 Onboard Micron MT41K512M16HA-125A memory
Rev 1.1 and 1.2 Onboard Micron MT41K512M16HA-125A memory
Rev 1.3 Onboard Kingston B5116ECMDXGGB memory
Use 'make menuconfig' to configure `onboard memory manufacture` in Mainboard
Use 'make menuconfig' to configure `onboard memory manufacturer` in Mainboard
menu.
## Required blobs
@ -53,7 +54,7 @@ serial/video/pcie ports might be available.
- eMMC
- SATA
- serial port
- SMbus
- SMBus
- HDA (codec on carrier)
- initialization with FSP MR2
- SeaBIOS payload (version rel-1.11.0-44-g7961917)

View File

@ -41,6 +41,12 @@ config ONBOARD_MEM_MICRON
bool "Micron"
help
Micron MT41K512M16HA memory
config ONBOARD_MEM_KINGSTON
bool "Kingston"
help
Kingston B5116ECMDXGGB memory
endchoice
config MAINBOARD_DIR

View File

@ -25,3 +25,4 @@ ramstage-y += w25q64.c
# Order of names in SPD_SOURCES is important!
SPD_SOURCES = SAMSUNG_K4B8G1646D-MYKO
SPD_SOURCES += MICRON_MT41K512M16HA-125A
SPD_SOURCES += KINGSTON_B5116ECMDXGGB

View File

@ -33,6 +33,9 @@ void mainboard_memory_init_params(struct romstage_params *params,
if (CONFIG(ONBOARD_MEM_MICRON))
spd_index = 1;
else if (CONFIG(ONBOARD_MEM_KINGSTON))
spd_index = 2;
if (get_spd_cbfs_rdev(&spd_rdev, spd_index) < 0)
die("spd.bin not found\n");

View File

@ -0,0 +1,258 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2019 Facebook, Inc.
# Copyright (C) 2019 Eltan B.V.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
#
# 8 Gb DDR3 (1600 MHz 11-11-11) Kingston B5116ECMDXGGB
#
# SINGLE DIE
#
# 64Mx16x8 ( 8 bank, 16 Rows, 10 Col, 2 KB page size )
# 6-7-8-9-10-11
# DDR3L-1600
# tCk 1.25ns
# tRCD 13.75ns
# tRP 13.75ns
# tRAS 35ns
# tRC 48.75ns
# CL-tRCD-tRP 11-11-11
# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
# bits[3:0]: 3 = 384 SPD Bytes Used
# bits[6:4]: 1 = 256 SPD Bytes Total
# bit7 : 0 = CRC covers bytes 0 ~ 128
23
# 1 SPD Revision
# 0x10 = Revision 1.0
10
# 2 Key Byte / DRAM Device Type
# bits[7:0]: 0x0c = DDR3 SDRAM
0B
# 3 Key Byte / Module Type
# bits[3:0]: 3 = SODIMM
# bits[6:4]: 0 = Not hybrid
# bits[7]: 0 = Not hybrid
03
# 4 SDRAM CHIP Density and Banks
# bits[3:0]: 5 = 8 Gigabits Total SDRAM capacity per chip
# bits[6:4]: 0 = 3 (8 banks)
# bits[7]: reserverd
05
# 5 SDRAM Addressing
# bits[2:0]: 1 = 10 Column Address Bits
# bits[5:3]: 4 = 16 Row Address Bits
# bits[7:6]: 0 = reserved
21
# 6 Module Nominal Voltage
# bits[0]: 0 = 1.5V operable
# bits[1]: 1 = 1.35V operable
# bits[2]: 0 = NOT 1.25V operable
# bits[7:3]: reserved
02
# 7 Module Organization
# bits[2:0]: 010b = 16 bits SDRAM device
# bits[5:3]: 000b = 1 ranks
# bits[7:6]: reserved
02
# 8 Module Memory Bus width
# bits[2:0]: 3 = 64 bits pirmary bus width
# bits[4:3]: 0 = 0 bits bus witdth extension
# bits[7:5]: reserved
03
# 9 Fine Timebase (FTB) dividend / divisor
# bits[3:0]: 1 = Divisor
# bits[7:4]: 1 = Dividend
11
# 10 Medium Timebase (MTB) dividend
# bits[7:0]: 0 = 1 (timebase 0.125ns)
01
# 11 Medium Timebase (MTB) divisor
# bits[7:0]: 8 (timebase 0.125ns)
08
# 12 SDRAM Minimum cycle time (tCKmin)
# 0xA tCK = 1.25ns (DDR3-1600 (800 MHz clock))
0A
# 13 Reserved
00
# 14 CAS Latencies supported, Least Significate Byte
# Support 6,7,8,9,10,11
FC
# 15 CAS Latencies supported, Most Significate Byte
# No supporting CL 12-18
00
# 16 Minimum CAS Latency Time (tAAmin)
# 0x69 tAA = 13.125ns (offset = 00) DDR3-1600K downbin
69
# 17 Minimum Write Recovery Time (tWRmin)
# 0x78 tWR = 15 ns
78
# 18 Minimum RAS to CAS Delay Time (tRCDmin)
# 0x69 tRCD = 13.125ns (offset 00) DDR3-1600K downbin
69
# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
# 0x3C tRRD = 7.5ns DDR3-1600, 2KB
3C
# 20 Minimum Row Precharge Delay Time (tRPmin)
# 0x69 tRP = 13.125ns (offset 00) DDR3-1600K downbin
69
# 21 Upper Nibble for tRAS and tRC
# 3:0 : 1 higher tRAS = 35ns
# 7:0 : 1 higher tRC = 48.125ns
11
# 22 Minimum Active to Precharge Delay Time (tRASmin), Least Significant byte
# lower 0x118 : tRAS = 35ns DDR3-1600
18
# 23 Minimum Active to Precharge Delay Time (tRCmin), Most Significant byte
# lower 0x181 : tRC = 48.125ns (offset 00) DDR3-1600K downbin
81
# 24 Minimum Refresh Recovery Delay time (tRFCmin), Least Significant byte
# lower 0xAF0 : tRFC = 350ns 8 Gb
F0
# 25 Minimum Refresh Recovery Delay time (tRFCmin), Most Significant byte
# higher 0xAF0 : tRFC = 350ns 8 Gb
0A
# 26 tWTRmin
# 0x3C : tWTR = 7.5 ns (DDR3)
3C
# 27 tRTPmin
# 0x3C : tRTP = 7.5 ns (DDR3)
3C
# 28 Upper Nibble for tFAW
# Bit [3:0] : 1 = higher 0x140 tFAW = 40ns
01
# 29 tFAWmin Lower
# lower 0x140 : tFAW = 40ns
40
# 30 SDRAM Optional Features
# byte [0] : 1 = RZQ/6 is support
# byte [1] : 1 = RZQ/7 is supported
# byte [7] : 1 = DLL-Off Mode support
83
# 31 Thermal options
# byte [0] : 1 = 0 - 95C
# byte [2] : 0 = Auto Self Refresh (ASR) is not supported
# byte [7] : 0 = Partial Array Self Refres (PASR) is not supported
01
# 32 Module Thermal support
# byte [0] : 0 = Thermal sensor accuracy undefined
# byte [7] : 0 = No thermal sensor
00
# 33 SDRAM device type
# byte [1:0] : 00b = Signal Loading not specified
# byte [6:4] : 000b = Die count not specified
# byte [7] : 0 = Standard Monolithic DRAM Device
00
# 34 Fine tCKmin
# 0x00 tCK = 1.25ns (DDR3-1600 (800 MHz clock))
00
# 35 Fine tAAmin
# 0x00 tAA = 13.125ns (tAAmin offset = 00) DDR3-1600K downbin
00
# 36 Fine tRCDmin
# 0x00 tRCD = 13.125ns DDR3-1600K downbin
00
# 37 Fine tRPmin
# 0x00 tRP = 13.125ns (offset 00) DDR3-1600K downbin
00
# 38 Fine tRCmin
# 0x00 tRC = 48.125ns (offset 00) DDR3-1600K downbin
00
# 39-59 reserved, general section
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00
# 60-116 Module specific section
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
# 117-118 Module Manufacturer
01 98
# 119 Module Manufacturing Location
00
# 120-121 Module Manufacturing Date
13 0A
# 122-125 Module Serial number
00 00 00 00
# 126-127 SPD CRC
00 00
# 128-145 Module Part number
66 53 49 49 54 69 67 77 68 88 71 71 66 00 00 00
00 00
# 145-146 Module revision code
00 00
# 148-149 DRAM Manufacturer ID code
01 98
# 150-175 Manufacturer Specific Data
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
# 176-255 Open for Customer Use
# 176 - 255
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00