diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb
index f02fb92c81..175939c083 100644
--- a/src/mainboard/arima/hdama/Config.lb
+++ b/src/mainboard/arima/hdama/Config.lb
@@ -46,8 +46,6 @@ driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -64,30 +62,6 @@ makerule ./auto.inc
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
 end
 
 ##
@@ -100,7 +74,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -108,7 +81,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -121,24 +93,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -146,12 +110,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
        ldscript /arch/i386/lib/failover.lds
-else
-       ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -161,27 +120,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c
index f1046a24fa..e69de29bb2 100644
--- a/src/mainboard/arima/hdama/auto.c
+++ b/src/mainboard/arima/hdama/auto.c
@@ -1,179 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-
-static void hard_reset(void)
-{
-	device_t dev;
-
-	/* Find the device */
-	dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-	
-	/* enable cf9 */
-	pci_write_config8(dev, 0x41, 0xf1);
-
-	/* reset */
-	set_bios_reset();
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	device_t dev;
-	
-	/* Find the device */
-	dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
-	/* Reset */
-	set_bios_reset();
-	pci_write_config8(dev, 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		/* Ensure the BIOS has control of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-	else {
-		/* Ensure the CPU has controll of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset_high */
-		outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		udelay(90);
-	}
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "debug.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-	/* Setup the console */
-	pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_default_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-#if 0
-	print_pci_devices();
-#endif
-	enable_smbus();
-#if 0
-	dump_spd_registers(ARRAY_SIZE(cpu), cpu);
-#endif
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-	
-#if 0
-	dump_pci_devices();
-#endif
-#if 0
-	dump_pci_device(PCI_DEV(0, 0x18, 2));
-	dump_pci_device(PCI_DEV(0, 0x18, 3));
-#endif
-
-#if 0
-	/* Check the first 1M */
-	ram_check(0x00000000, 0x000100000);
-#endif
-}
diff --git a/src/mainboard/arima/hdama/failover.c b/src/mainboard/arima/hdama/failover.c
index a8d22e9cf0..e69de29bb2 100644
--- a/src/mainboard/arima/hdama/failover.c
+++ b/src/mainboard/arima/hdama/failover.c
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-	unsigned nodeid;
-
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-	nodeid = lapicid() & 0xf;
-
-	/* Is this a cpu only reset? */
-	if (cpu_init_detected(nodeid)) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/ibm/e325/Config.lb b/src/mainboard/ibm/e325/Config.lb
index c759268dbb..6e043d10b9 100644
--- a/src/mainboard/ibm/e325/Config.lb
+++ b/src/mainboard/ibm/e325/Config.lb
@@ -47,8 +47,6 @@ if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -65,30 +63,6 @@ makerule ./auto.inc
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
 end
 
 ##
@@ -101,7 +75,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -109,7 +82,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -122,24 +94,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -147,12 +111,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
        ldscript /arch/i386/lib/failover.lds
-else
-       ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -162,27 +121,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/ibm/e325/failover.c b/src/mainboard/ibm/e325/failover.c
index acea55ce35..e69de29bb2 100644
--- a/src/mainboard/ibm/e325/failover.c
+++ b/src/mainboard/ibm/e325/failover.c
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-        unsigned nodeid;
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-        nodeid = lapicid() & 0xf;
-
-	/* Is this a cpu only reset? */
-	if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb
index 72c7467908..23202607da 100644
--- a/src/mainboard/ibm/e326/Config.lb
+++ b/src/mainboard/ibm/e326/Config.lb
@@ -47,8 +47,6 @@ if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -65,30 +63,6 @@ makerule ./auto.inc
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
 end
 
 ##
@@ -101,7 +75,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -109,7 +82,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -122,24 +94,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -147,12 +111,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
        ldscript /arch/i386/lib/failover.lds
-else
-       ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -162,27 +121,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/ibm/e326/failover.c b/src/mainboard/ibm/e326/failover.c
index acea55ce35..e69de29bb2 100644
--- a/src/mainboard/ibm/e326/failover.c
+++ b/src/mainboard/ibm/e326/failover.c
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-        unsigned nodeid;
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-        nodeid = lapicid() & 0xf;
-
-	/* Is this a cpu only reset? */
-	if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/iwill/dk8s2/Config.lb b/src/mainboard/iwill/dk8s2/Config.lb
index 9b6a3afe9f..a90968b4d2 100644
--- a/src/mainboard/iwill/dk8s2/Config.lb
+++ b/src/mainboard/iwill/dk8s2/Config.lb
@@ -50,8 +50,6 @@ if HAVE_PIRQ_TABLE object irq_tables.o end
 ## ATI Rage XL framebuffering graphics driver
 dir /drivers/ati/ragexl
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -68,30 +66,6 @@ makerule ./auto.inc
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
 end
 
 ##
@@ -104,7 +78,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -112,7 +85,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -125,24 +97,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -150,12 +114,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
        ldscript /arch/i386/lib/failover.lds
-else
-       ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -165,27 +124,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/iwill/dk8s2/auto.c b/src/mainboard/iwill/dk8s2/auto.c
index b302b79adc..e69de29bb2 100644
--- a/src/mainboard/iwill/dk8s2/auto.c
+++ b/src/mainboard/iwill/dk8s2/auto.c
@@ -1,159 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* enable cf9 */
-	pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
-	/* reset */
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-	pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		/* Ensure the BIOS has control of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	} else {
-		/* Ensure the CPU has controll of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset_high */
-		outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		udelay(90);
-	}
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-        unsigned nodeid;
-
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-	/* Setup the console */	
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_default_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-	
-#if 0
-	print_pci_devices();
-#endif
-
-	enable_smbus();
-
-#if 0
-	dump_spd_registers(&cpu[0]);
-#endif
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 0
-	dump_pci_devices();
-	dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-}
diff --git a/src/mainboard/iwill/dk8s2/failover.c b/src/mainboard/iwill/dk8s2/failover.c
index 262fdd60bd..e69de29bb2 100644
--- a/src/mainboard/iwill/dk8s2/failover.c
+++ b/src/mainboard/iwill/dk8s2/failover.c
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-        unsigned nodeid;
-
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-	/* Is this a cpu only reset? */
-	if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/iwill/dk8x/Config.lb b/src/mainboard/iwill/dk8x/Config.lb
index 91fd3fbe3e..938ae2ca8d 100644
--- a/src/mainboard/iwill/dk8x/Config.lb
+++ b/src/mainboard/iwill/dk8x/Config.lb
@@ -47,8 +47,6 @@ if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -65,30 +63,6 @@ makerule ./auto.inc
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
 end
 
 ##
@@ -101,7 +75,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -109,7 +82,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -122,24 +94,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -147,12 +111,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
        ldscript /arch/i386/lib/failover.lds
-else
-       ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -162,27 +121,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/iwill/dk8x/auto.c b/src/mainboard/iwill/dk8x/auto.c
index 2d4d6f4d15..e69de29bb2 100644
--- a/src/mainboard/iwill/dk8x/auto.c
+++ b/src/mainboard/iwill/dk8x/auto.c
@@ -1,189 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* enable cf9 */
-	pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
-	/* reset */
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-	pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		/* Ensure the BIOS has control of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-	else {
-		/* Ensure the CPU has controll of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset_high */
-		outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		udelay(90);
-	}
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-        unsigned nodeid;
-
-	if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-	}
-	/* Setup the console */
-	pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_default_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-
-#if 0
-	print_pci_devices();
-#endif
-	enable_smbus();
-#if 0
-	dump_spd_registers(&cpu[0]);
-#endif
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 1
-	dump_pci_devices();
-#endif
-#if 0
-	dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-
-	/* Check all of memory */
-#if 0
-	msr_t msr;
-	msr = rdmsr(TOP_MEM);
-	print_debug("TOP_MEM: ");
-	print_debug_hex32(msr.hi);
-	print_debug_hex32(msr.lo);
-	print_debug("\r\n");
-#endif
-#if 0
-	ram_check(0x00000000, msr.lo);
-#endif
-#if 0
-	static const struct {
-		unsigned long lo, hi;
-	} check_addrs[] = {
-		/* Check 16MB of memory @ 0*/
-		{ 0x00000000, 0x01000000 },
-#if TOTAL_CPUS > 1
-		/* Check 16MB of memory @ 2GB */
-		{ 0x80000000, 0x81000000 },
-#endif
-	};
-	int i;
-	for(i = 0; i < ARRAY_SIZE(check_addrs); i++) {
-		ram_check(check_addrs[i].lo, check_addrs[i].hi);
-	}
-#endif
-}
diff --git a/src/mainboard/iwill/dk8x/failover.c b/src/mainboard/iwill/dk8x/failover.c
index 262fdd60bd..e69de29bb2 100644
--- a/src/mainboard/iwill/dk8x/failover.c
+++ b/src/mainboard/iwill/dk8x/failover.c
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-        unsigned nodeid;
-
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-	/* Is this a cpu only reset? */
-	if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/msi/ms9282/Config.lb b/src/mainboard/msi/ms9282/Config.lb
index 00be55cf71..e5bbca6fce 100644
--- a/src/mainboard/msi/ms9282/Config.lb
+++ b/src/mainboard/msi/ms9282/Config.lb
@@ -75,8 +75,6 @@ if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -93,32 +91,6 @@ makerule ./auto.inc
        action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
-
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-
 end
 
 ##
@@ -131,7 +103,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
        if CONFIG_USE_INIT
                ldscript /cpu/x86/32bit/entry32.lds
        end
@@ -139,7 +110,6 @@ if USE_DCACHE_RAM
        if CONFIG_USE_INIT
                ldscript      /cpu/amd/car/cache_as_ram.lds
        end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -152,12 +122,6 @@ else
        ldscript /cpu/x86/32bit/reset32.lds
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
@@ -172,12 +136,10 @@ if USE_FALLBACK_IMAGE
        ldscript /southbridge/nvidia/mcp55/romstrap.lds
 end
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup
@@ -185,12 +147,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
        ldscript /arch/i386/lib/failover.lds
-else
-       ldscript /arch/i386/lib/failover.lds
-       mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -200,25 +157,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-# ROMCC
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files
 ##
diff --git a/src/mainboard/msi/ms9282/failover.c b/src/mainboard/msi/ms9282/failover.c
index dc10982501..e69de29bb2 100644
--- a/src/mainboard/msi/ms9282/failover.c
+++ b/src/mainboard/msi/ms9282/failover.c
@@ -1,114 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static void sio_setup(void)
-{
-
-        unsigned value;
-       uint32_t dword;
-       uint8_t byte;
-
-        byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
-        byte |= 0x20;
-        pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
-       dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
-       dword |= (1<<0);
-       pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-               if (last_boot_normal()) {
-                       goto normal_image;
-               } else {
-                       goto fallback_image;
-               }
-       }
-
-       /* Is this a secondary cpu? */
-       if (!boot_cpu()) {
-               if (last_boot_normal()) {
-                       goto normal_image;
-               } else {
-                       goto fallback_image;
-               }
-       }
-
-       /* Nothing special needs to be done to find bus 0 */
-       /* Allow the HT devices to be found */
-
-       enumerate_ht_chain();
-
-       sio_setup();
-
-       /* Setup the mcp55 */
-       mcp55_enable_rom();
-
-       /* Is this a deliberate reset by the bios */
-       if (bios_reset_detected() && last_boot_normal()) {
-               goto normal_image;
-       }
-       /* This is the primary cpu how should I boot? */
-       else if (do_normal_boot()) {
-               goto normal_image;
-       }
-       else {
-               goto fallback_image;
-       }
- normal_image:
-       asm volatile ("jmp __normal_image"
-               : /* outputs */
-               : "a" (bist) /* inputs */
-               : /* clobbers */
-               );
- fallback_image:
-       return bist;
-}
diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb
index 6a354cf42d..bb89d95c41 100644
--- a/src/mainboard/newisys/khepri/Config.lb
+++ b/src/mainboard/newisys/khepri/Config.lb
@@ -47,8 +47,6 @@ if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -65,31 +63,6 @@ makerule ./auto.inc
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
 
-end
-else
- 
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
 end
 
 ##
@@ -102,7 +75,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -110,7 +82,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -123,23 +94,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-### Should this be in the northbridge code?
-if USE_DCACHE_RAM
-else
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -147,12 +111,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
 	ldscript /arch/i386/lib/failover.lds
-else
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -162,29 +121,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 config chip.h
 
 # FIXME: ROM for onboard VGA
diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c
index 6d0a7455fc..e69de29bb2 100644
--- a/src/mainboard/newisys/khepri/auto.c
+++ b/src/mainboard/newisys/khepri/auto.c
@@ -1,155 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* enable cf9 */
-	pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
-	/* reset */
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-	pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		/* Ensure the BIOS has control of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-	else {
-		/* Ensure the CPU has controll of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset_high */
-		outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		udelay(90);
-	}
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-
-#include "sdram/generic_sdram.c"
-
-/* newisys khepri does not want the default */
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define NODE_RAM(x)                     \
-	.node_id = 0+x,                 \
-	.f0 = PCI_DEV(0, 0x18+x, 0),    \
-	.f1 = PCI_DEV(0, 0x18+x, 1),    \
-	.f2 = PCI_DEV(0, 0x18+x, 2),    \
-	.f3 = PCI_DEV(0, 0x18+x, 3)
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-		{
-			NODE_RAM(0),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-		{
-			NODE_RAM(1),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-	};
-
-	int needs_reset;
-        unsigned nodeid;
-
-	if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-	}
-	/* Setup the console */
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_khepri_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-	needs_reset=ht_setup_chains_x();
-
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-#if 0
-	print_pci_devices();
-#endif
-	enable_smbus();
-#if 0
-	dump_spd_registers(&cpu[0]);
-#endif
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 0
-	dump_pci_devices();
-#endif
-#if 0
-	dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-
-#if 0
-	/* Check the first 1M */
-	ram_check(0x00000000, 0x000100000);
-#endif
-}
diff --git a/src/mainboard/newisys/khepri/failover.c b/src/mainboard/newisys/khepri/failover.c
index 16a5c9a904..e69de29bb2 100644
--- a/src/mainboard/newisys/khepri/failover.c
+++ b/src/mainboard/newisys/khepri/failover.c
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-	unsigned nodeid;
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-	nodeid=lapicid();
-	/* Is this a cpu only reset? */
-	if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb
index 50743d3769..3b5d07967e 100644
--- a/src/mainboard/sunw/ultra40/Config.lb
+++ b/src/mainboard/sunw/ultra40/Config.lb
@@ -47,8 +47,6 @@ object get_bus_conf.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT	
 		makerule ./auto.o
 		        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -63,32 +61,6 @@ if USE_DCACHE_RAM
 		end
 	end
 
-else
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-        	depends "$(MAINBOARD)/failover.c ../romcc"
-	        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-        	depends "$(MAINBOARD)/failover.c ../romcc"
-	        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-end
-
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +71,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,8 +78,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/amd/car/cache_as_ram.lds
         end
-end
-
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -121,12 +90,6 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
@@ -141,14 +104,10 @@ if USE_FALLBACK_IMAGE
 	ldscript /southbridge/nvidia/ck804/romstrap.lds
 end
 
-
-
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -157,34 +116,17 @@ end
 ###
 if USE_FALLBACK_IMAGE
 	ldscript /arch/i386/lib/failover.lds
-	if USE_DCACHE_RAM
-	else
-	        mainboardinit ./failover.inc
-	end
 end
 
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-	# ROMCC
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/sunw/ultra40/auto.c b/src/mainboard/sunw/ultra40/auto.c
index db3de9c934..e69de29bb2 100644
--- a/src/mainboard/sunw/ultra40/auto.c
+++ b/src/mainboard/sunw/ultra40/auto.c
@@ -1,198 +0,0 @@
-#define ASSEMBLY 1
- 
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-#include <cpu/amd/model_fxx_rev.h>
-//#define K8_HT_FREQ_1G_SUPPORT 1
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_msr.h>
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-static void hard_reset(void)
-{
-        set_bios_reset();
-
-        /* full reset */
-	outb(0x0a, 0x0cf9);
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        set_bios_reset();
-#if 1
-        /* link reset */
-	outb(0x02, 0x0cf9);
-        outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-        
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_gpio_setup(void){
-
-	unsigned value;
-
-//	lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c
-
-#if 1
-	lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L 
-	value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
-	lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
-#endif
-	
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-
-#include "northbridge/amd/amdk8/raminit.c"
-#if 0
-        #define ENABLE_APIC_EXT_ID 1
-        #define APIC_ID_OFFSET 0x10
-        #define LIFT_BSP_APIC_ID 0
-#else
-        #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* maybe does not want the default */
-#include "resourcemap.c"
-
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 2
-#define CK804B_BUSN 0x80
-#define CK804_USE_NIC 1
-#define CK804_USE_ACI 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-
-//set GPIO to input mode
-#define CK804_MB_SETUP \
-                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/  \
-                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
-                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/  \
-                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/   \
-                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/  \
-                RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
-		
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-        int needs_reset;
-
-        if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-        }
-
-	// post_code(0x32);
-
-        lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();
-        console_init();
-	
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	sio_gpio_setup();
-
-        setup_ultra40_resource_map();
-
-	needs_reset = setup_coherent_ht_domain();
-
-        needs_reset |= ht_setup_chains_x();
-
-	needs_reset |= ck804_early_setup_x();	
-
-       	if (needs_reset) {
-               	print_info("ht reset -\r\n");
-               	soft_reset();
-       	}
-
-
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-
-}
diff --git a/src/mainboard/sunw/ultra40/failover.c b/src/mainboard/sunw/ultra40/failover.c
index 2abd8fc1cd..e69de29bb2 100644
--- a/src/mainboard/sunw/ultra40/failover.c
+++ b/src/mainboard/sunw/ultra40/failover.c
@@ -1,118 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-
-#include <device/pnp_def.h>  
-
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-#define SUPERIO_COM1_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-#define SUPERIO_COM1_IO_BASE 0x3f8
-
-static void sio_setup(void)
-{
-        
-        unsigned value;
-	uint32_t dword;
-	uint8_t byte;
-
-        pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);  
-
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
-        byte |= 0x20; 
-        pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-	
-	dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
-	dword |= (1<<29)|(1<<0);  
-	pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if  1
-        lpc47b397_enable_serial(SUPERIO_COM1_DEV, SUPERIO_COM1_IO_BASE);
-
-#if 0
-/* what's this?
-	value =  lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
-	value &= 0xbf;
-        lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
-*/
-#endif
-#endif
-
-}
-
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb
index e7a8ac3850..1131c3d3f2 100644
--- a/src/mainboard/tyan/s2891/Config.lb
+++ b/src/mainboard/tyan/s2891/Config.lb
@@ -63,8 +63,6 @@ if HAVE_ACPI_TABLES
 	#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
 end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 	makerule ./auto.o
 		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -79,32 +77,6 @@ else
 	end
 end
 
-else
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-		depends "$(MAINBOARD)/failover.c ../romcc"
-		action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-		depends "$(MAINBOARD)/failover.c ../romcc"
-		action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-		depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-		action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-		depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-		action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-end
-
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -115,7 +87,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
 	if CONFIG_USE_INIT
 		ldscript /cpu/x86/32bit/entry32.lds
 	end
@@ -123,7 +94,6 @@ if USE_DCACHE_RAM
 	if CONFIG_USE_INIT
 		ldscript /cpu/amd/car/cache_as_ram.lds
 	end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -136,12 +106,6 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
@@ -156,12 +120,10 @@ if USE_FALLBACK_IMAGE
 	ldscript /southbridge/nvidia/ck804/romstrap.lds
 end
 
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup
@@ -170,10 +132,6 @@ end
 ###
 if USE_FALLBACK_IMAGE
 	ldscript /arch/i386/lib/failover.lds
-	if USE_DCACHE_RAM
-	else
-		mainboardinit ./failover.inc
-	end
 end
 
 ###
@@ -183,25 +141,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-	# ROMCC
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files
 ##
diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
index bcc444d1a6..e02d732875 100644
--- a/src/mainboard/tyan/s2892/Config.lb
+++ b/src/mainboard/tyan/s2892/Config.lb
@@ -63,8 +63,6 @@ if HAVE_ACPI_TABLES
 	#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
 end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 	makerule ./auto.o
 		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -79,32 +77,6 @@ else
 	end
 end
 
-else
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-		depends "$(MAINBOARD)/failover.c ../romcc"
-		action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-		depends "$(MAINBOARD)/failover.c ../romcc"
-		action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-		depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-		action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-		depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-		action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-end
-
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -115,7 +87,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
 	if CONFIG_USE_INIT
 		ldscript /cpu/x86/32bit/entry32.lds
 	end
@@ -123,7 +94,6 @@ if USE_DCACHE_RAM
 	if CONFIG_USE_INIT
 		ldscript /cpu/amd/car/cache_as_ram.lds
 	end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -136,12 +106,6 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
@@ -156,12 +120,10 @@ if USE_FALLBACK_IMAGE
 	ldscript /southbridge/nvidia/ck804/romstrap.lds
 end
 
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup
@@ -169,12 +131,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-	if USE_DCACHE_RAM
 		ldscript /arch/i386/lib/failover.lds
-	else
-		ldscript /arch/i386/lib/failover.lds
-		mainboardinit ./failover.inc
-	end
 end
 
 ###
@@ -184,25 +141,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-	# ROMCC
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files
 ##
diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
index bc5007506f..8bbacfc026 100644
--- a/src/mainboard/tyan/s2895/Config.lb
+++ b/src/mainboard/tyan/s2895/Config.lb
@@ -72,8 +72,6 @@ if HAVE_ACPI_TABLES
 	#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
 end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 	makerule ./auto.o
 		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -88,32 +86,6 @@ else
 	end
 end
 
-else
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-		depends "$(MAINBOARD)/failover.c ../romcc"
-		action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-		depends "$(MAINBOARD)/failover.c ../romcc"
-		action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-		depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-		action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-		depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-		action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-end
-
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -131,7 +103,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
 	if CONFIG_USE_INIT
 		ldscript /cpu/x86/32bit/entry32.lds
 	end
@@ -139,7 +110,6 @@ if USE_DCACHE_RAM
 	if CONFIG_USE_INIT
 		ldscript /cpu/amd/car/cache_as_ram.lds
 	end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -162,12 +132,6 @@ else
     end
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
@@ -189,12 +153,10 @@ else
 	end
 end
 
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup
@@ -203,42 +165,23 @@ end
 ###
 if HAVE_FAILOVER_BOOT
 	if USE_FAILOVER_IMAGE
-		if USE_DCACHE_RAM
 			ldscript /arch/i386/lib/failover_failover.lds
-		end
 	end
 else
 	if USE_FALLBACK_IMAGE
-		if USE_DCACHE_RAM
 			ldscript /arch/i386/lib/failover.lds
-		else
-			mainboardinit ./failover.inc
-		end
 	end
 end
 
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-	# ROMCC
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files
 ##
diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
index cf728b82ad..ac36e925a7 100644
--- a/src/mainboard/tyan/s4880/Config.lb
+++ b/src/mainboard/tyan/s4880/Config.lb
@@ -43,7 +43,6 @@ arch i386 end
 driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
 
 	if CONFIG_USE_INIT
 
@@ -61,43 +60,6 @@ if USE_DCACHE_RAM
 		        action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 			end
 	end
-else
-
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-        	depends "$(MAINBOARD)/failover.c ../romcc"
-	        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-	        depends "$(MAINBOARD)/failover.c ../romcc"
-        	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	##
-	## Setup RAM
-	##
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-	mainboardinit arch/i386/lib/jmp_auto_out.inc
-
-end
 
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
@@ -109,7 +71,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -117,8 +78,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/amd/car/cache_as_ram.lds
         end
-end
-
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -131,25 +90,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -157,32 +107,18 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-	if USE_DCACHE_RAM
 		ldscript /arch/i386/lib/failover.lds
-	else
-       		ldscript /arch/i386/lib/failover.lds
-	        mainboardinit ./failover.inc
-	end
 end
 
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-
-	# ROMCC
-	mainboardinit arch/i386/lib/jmp_auto.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c
index 36115f6a0d..e69de29bb2 100644
--- a/src/mainboard/tyan/s4880/auto.c
+++ b/src/mainboard/tyan/s4880/auto.c
@@ -1,233 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
-        unsigned device=(ctrl->channel0[0])>>8;
-        smbus_write_byte(SMBUS_HUB , 0x01, device);
-        smbus_write_byte(SMBUS_HUB , 0x03, 0);
-}
-#if 0
-static inline void change_i2c_mux(unsigned device)
-{
-#define SMBUS_HUB 0x18
-        smbus_write_byte(SMBUS_HUB , 0x01, device);
-        smbus_write_byte(SMBUS_HUB , 0x03, 0);
-}
-#endif
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-
-#define THIRD_CPU  1 
-#define FOURTH_CPU 1 
-
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
-
-#define RC0 ((1<<1)<<8)
-#define RC1 ((1<<2)<<8)
-#define RC2 ((1<<3)<<8)
-#define RC3 ((1<<4)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-        
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-                {
-                        .node_id = 0,
-                        .f0 = PCI_DEV(0, 0x18, 0),
-                        .f1 = PCI_DEV(0, 0x18, 1),
-                        .f2 = PCI_DEV(0, 0x18, 2),
-                        .f3 = PCI_DEV(0, 0x18, 3),
-                        .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
-                        .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
-                },
-#endif
-#if SECOND_CPU
-                {
-                        .node_id = 1,
-                        .f0 = PCI_DEV(0, 0x19, 0),
-                        .f1 = PCI_DEV(0, 0x19, 1),
-                        .f2 = PCI_DEV(0, 0x19, 2),
-                        .f3 = PCI_DEV(0, 0x19, 3),
-                        .channel0 = { RC1|DIMM0, 0 , 0, 0 },
-                        .channel1 = { RC1|DIMM1, 0, 0, 0 },
-
-                },
-#endif
-
-#if THIRD_CPU
-                {
-                        .node_id = 2,
-                        .f0 = PCI_DEV(0, 0x1a, 0),
-                        .f1 = PCI_DEV(0, 0x1a, 1),
-                        .f2 = PCI_DEV(0, 0x1a, 2),
-                        .f3 = PCI_DEV(0, 0x1a, 3),
-                        .channel0 = { RC2|DIMM0, 0, 0, 0 },
-                        .channel1 = { RC2|DIMM1, 0, 0, 0 },
-
-                },
-#endif
-#if FOURTH_CPU
-                {
-                        .node_id = 3,
-                        .f0 = PCI_DEV(0, 0x1b, 0),
-                        .f1 = PCI_DEV(0, 0x1b, 1),
-                        .f2 = PCI_DEV(0, 0x1b, 2),
-                        .f3 = PCI_DEV(0, 0x1b, 3),
-                        .channel0 = { RC3|DIMM0, 0, 0, 0 },
-                        .channel1 = { RC3|DIMM1, 0, 0, 0 },
-
-                },
-#endif
-	};
-	int i;
-        int needs_reset;
-
-        if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-        }
-
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_s4880_resource_map();
-
-        needs_reset = setup_coherent_ht_domain();
-
-        needs_reset |= ht_setup_chains_x();
-	
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-	
-#if 0
-	dump_pci_devices();
-#endif
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s4880/failover.c b/src/mainboard/tyan/s4880/failover.c
index c347af32dd..e69de29bb2 100644
--- a/src/mainboard/tyan/s4880/failover.c
+++ b/src/mainboard/tyan/s4880/failover.c
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-               if (last_boot_normal()) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-        /* Is this a secondary cpu? */
-        if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb
index 88ae617cd7..d3e1bb509b 100644
--- a/src/mainboard/tyan/s4882/Config.lb
+++ b/src/mainboard/tyan/s4882/Config.lb
@@ -43,7 +43,6 @@ arch i386 end
 driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
 
 	if CONFIG_USE_INIT
 
@@ -61,43 +60,6 @@ if USE_DCACHE_RAM
 		        action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 			end
 	end
-else
-
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-        	depends "$(MAINBOARD)/failover.c ../romcc"
-	        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-	        depends "$(MAINBOARD)/failover.c ../romcc"
-        	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	##
-	## Setup RAM
-	##
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-	mainboardinit arch/i386/lib/jmp_auto_out.inc
-
-end
 
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
@@ -109,7 +71,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -117,8 +78,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/amd/car/cache_as_ram.lds
         end
-end
-
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -131,25 +90,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -157,32 +107,18 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-	if USE_DCACHE_RAM
 		ldscript /arch/i386/lib/failover.lds
-	else
-       		ldscript /arch/i386/lib/failover.lds
-	        mainboardinit ./failover.inc
-	end
 end
 
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-
-	# ROMCC
-	mainboardinit arch/i386/lib/jmp_auto.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c
index 7576e4de26..e69de29bb2 100644
--- a/src/mainboard/tyan/s4882/auto.c
+++ b/src/mainboard/tyan/s4882/auto.c
@@ -1,233 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 1), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 1), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
-	int ret,i;
-        unsigned device=(ctrl->channel0[0])>>8;
-	/* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
-	i=2;
-	do {
-	        ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
-	} while ((ret!=0) && (i-->0));
-
-        smbus_write_byte(SMBUS_HUB, 0x03, 0);
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#if 0           
-        #define ENABLE_APIC_EXT_ID 1
-        #define APIC_ID_OFFSET 0x10
-        #define LIFT_BSP_APIC_ID 0
-#else                   
-        #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-
-#define THIRD_CPU  1 
-#define FOURTH_CPU 1 
-
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
-
-#define RC0 ((1<<2)<<8)
-#define RC1 ((1<<1)<<8)
-#define RC2 ((1<<4)<<8)
-#define RC3 ((1<<3)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-        
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-                {
-                        .node_id = 0,
-                        .f0 = PCI_DEV(0, 0x18, 0),
-                        .f1 = PCI_DEV(0, 0x18, 1),
-                        .f2 = PCI_DEV(0, 0x18, 2),
-                        .f3 = PCI_DEV(0, 0x18, 3),
-                        .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
-                        .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
-                },
-#endif
-#if SECOND_CPU
-                {
-                        .node_id = 1,
-                        .f0 = PCI_DEV(0, 0x19, 0),
-                        .f1 = PCI_DEV(0, 0x19, 1),
-                        .f2 = PCI_DEV(0, 0x19, 2),
-                        .f3 = PCI_DEV(0, 0x19, 3),
-                        .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 },
-                        .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 },
-
-                },
-#endif
-
-#if THIRD_CPU
-                {
-                        .node_id = 2,
-                        .f0 = PCI_DEV(0, 0x1a, 0),
-                        .f1 = PCI_DEV(0, 0x1a, 1),
-                        .f2 = PCI_DEV(0, 0x1a, 2),
-                        .f3 = PCI_DEV(0, 0x1a, 3),
-                        .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 },
-                        .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 },
-
-                },
-#endif
-#if FOURTH_CPU
-                {
-                        .node_id = 3,
-                        .f0 = PCI_DEV(0, 0x1b, 0),
-                        .f1 = PCI_DEV(0, 0x1b, 1),
-                        .f2 = PCI_DEV(0, 0x1b, 2),
-                        .f3 = PCI_DEV(0, 0x1b, 3),
-                        .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 },
-                        .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
-
-                },
-#endif
-	};
-	int i;
-        int needs_reset;
-        
-        if (bist == 0) {
-		k8_init_and_stop_secondaries();
-        }
-                        
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-        report_bist_failure(bist);
-	
-        setup_s4882_resource_map();
-
-        needs_reset = setup_coherent_ht_domain();
-
-        needs_reset |= ht_setup_chains_x();
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-	
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-	
-}
diff --git a/src/mainboard/tyan/s4882/failover.c b/src/mainboard/tyan/s4882/failover.c
index 77e9851410..e69de29bb2 100644
--- a/src/mainboard/tyan/s4882/failover.c
+++ b/src/mainboard/tyan/s4882/failover.c
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}