*** empty log message ***

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1030 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Greg Watson 2003-07-24 21:03:45 +00:00
parent b794667b75
commit f7dd989955
2 changed files with 195 additions and 0 deletions

View File

@ -0,0 +1,5 @@
##
## CPU initialization
##
initinclude "EARLY_INIT" ppc/mpc74xx/mpc74xx.inc

View File

@ -0,0 +1,190 @@
/* Copyright 2000 AG Electronics Ltd. */
/* This code is distributed without warranty under the GPL v2 (see COPYING) */
/*
* The aim of this code is to bring the machine from power-on to the point
* where we can jump to the the main LinuxBIOS entry point hardwaremain()
* which is written in C.
*
* At power-on, we have no RAM, a memory-mapped I/O space, and we are executing
* out of ROM, generally at 0xfff00100.
*
* Before we jump to harwaremain() we want to do the following:
*
* - enable L1 I/D caches, otherwise performance will be slow
* - set up DBATs for the following regions:
* - RAM (generally 0x00000000 - 0x7fffffff)
* - ROM (_ROMBASE - _ROMBASE + 16Mb)
* - I/O (generally 0xfc000000 - 0xfdffffff)
* - the main purpose for setting up the DBATs is so the I/O region
* can be marked cache inhibited/write through
* - set up IBATs for RAM and ROM
*
*/
#define BSP_IOREGION1 0x80000000
#define BSP_IOMASK1 BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER
#define BSP_IOREGION2 0xFD000000
#define BSP_IOMASK2 BAT_BL_64M | BAT_VALID_SUPERVISOR | BAT_VALID_USER
isync
/*
* Disable dcache and MMU, so we're in a known state
*/
li r0, 0
sync
mtspr HID0, r0
sync
mtmsr r0
isync
/*
* Invalidate D & I BATS
*/
mtibatu 0, r0
mtibatu 1, r0
mtibatu 2, r0
mtibatu 3, r0
isync
mtdbatu 0, r0
mtdbatu 1, r0
mtdbatu 2, r0
mtdbatu 3, r0
isync
/*
* Clear segment registers (LinuxBIOS doesn't use these)
*/
mtsr 0, r0
isync
mtsr 1, r0
isync
mtsr 2, r0
isync
mtsr 3, r0
isync
mtsr 4, r0
isync
mtsr 5, r0
isync
mtsr 6, r0
isync
mtsr 7, r0
isync
mtsr 8, r0
isync
mtsr 9, r0
isync
mtsr 10, r0
isync
mtsr 11, r0
isync
mtsr 12, r0
isync
mtsr 13, r0
isync
mtsr 14, r0
isync
mtsr 15, r0
isync
/*
* Initialize northbridge. This has to happen early because it
* resets memory. Memory is on at this point, albeit with
* pessimistic settings. We reconfigure later using I2C.
*/
bl bsp_init_northbridge
/*
* Set up DBATs
*
* DBAT0 covers RAM (0 - 256Mb)
* DBAT1 covers PCI memory and ROM (0xFC000000 - 0xFFFFFFFF)
* DBAT1 covers PCI memory (0x80000000 - 0x8FFFFFFF)
*/
lis r2, 0@ha
ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER
ori r2, r2, BAT_READ_WRITE
mtdbatu 0, r3
mtdbatl 0, r2
isync
lis r2, BSP_IOREGION2@ha
ori r3, r2, BAT_BL_64M | BAT_VALID_SUPERVISOR | BAT_VALID_USER
ori r2, r2, BAT_CACHE_INHIBITED | BAT_GUARDED | BAT_READ_WRITE
mtdbatu 1, r3
mtdbatl 1, r2
isync
lis r2, BSP_IOREGION1@h
ori r3, r2, BSP_IOMASK1
ori r2, r2, BAT_CACHE_INHIBITED | BAT_GUARDED | BAT_READ_WRITE
mtdbatu 2, r3
mtdbatl 2, r2
isync
/*
* IBATS
*
* IBAT0 covers RAM (0 - 256Mb)
* IBAT1 covers ROM (_ROMBASE - _ROMBASE+16M)
*/
lis r2, 0@ha
ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER
ori r2, r2, BAT_READ_WRITE
mtibatu 0, r3
mtibatl 0, r2
isync
lis r2, _ROMBASE@ha
ori r3, r2, BAT_BL_16M | BAT_VALID_SUPERVISOR | BAT_VALID_USER
ori r2, r2, BAT_READ_ONLY
mtibatu 1, r3
mtibatl 1, r2
isync
/*
* Invalidate tlb entries
*/
lis r3, 0
lis r5, 0x4
isync
tlblp:
tlbie r3
sync
addi r3, r3, 0x1000
cmp 0, 0, r3, r5
blt tlblp
sync
/*
* Enable MMU
*/
mfmsr r2
ori r2, r2, MSR_DR | MSR_IR
isync
mtmsr r2
isync
/*
* Enable L1 dcache
*/
mfspr r2, HID0
ori r2, r2, HID0_DCE | HID0_DCFI
sync
mtspr HID0, r2
/*
* Enable L1 icache
*/
mfspr r2, HID0
ori r2, r2, HID0_ICE | HID0_ICFI
isync
mtspr HID0, r2
/*
* Must branch to start_payload once CPU initialization is completed
*/
b start_payload