diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc index fa90c5bf7f..5be87681be 100644 --- a/src/cpu/amd/model_lx/cache_as_ram.inc +++ b/src/cpu/amd/model_lx/cache_as_ram.inc @@ -177,6 +177,7 @@ DCacheSetupGood: /* Go do early init and memory setup */ call cache_as_ram_main +done_cache_as_ram_main: /* If you wanted to maintain the stack in memory you would need to set the tags as dirty so the wbinvd would push out the old stack contents to memory */ diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb index 3817dc5b52..6294701e4c 100644 --- a/src/mainboard/digitallogic/msm800sev/Config.lb +++ b/src/mainboard/digitallogic/msm800sev/Config.lb @@ -44,30 +44,21 @@ arch i386 end driver mainboard.o -if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +if HAVE_PIRQ_TABLE + object irq_tables.o end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +if USE_DCACHE_RAM + #compile cache_as_ram.c to auto.inc + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end + ## ## Build our 16 bit and 32 bit linuxBIOS entry code @@ -104,7 +95,7 @@ ldscript /arch/i386/lib/id.lds ### if USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +# mainboardinit ./failover.inc end ### @@ -115,7 +106,11 @@ end ## Setup RAM ## mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit ./auto.inc + +if USE_DCACHE_RAM + mainboardinit cpu/amd/model_lx/cache_as_ram.inc + mainboardinit ./cache_as_ram_auto.inc +end ## ## Include the secondary Configuration files @@ -124,57 +119,88 @@ dir /pc80 config chip.h chip northbridge/amd/lx - # they keep changing this. 0:f.0 5c.w to see where it is - register "irqmap" = "0xbaba" - register "setupflash" = "0" + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x000010da" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EF25" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. device apic_cluster 0 on chip cpu/amd/model_lx device apic 0 on end end end - device pci_domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536_lx - register "isa_irq" = "0" - #register "flash_irq" = "14" - ## IDE IRQ - register "enable_ide_irq" = "0" - - register "audio_irq" = "5" - register "usb_irq" = "7" - - register "uart0_irq" = "0" - register "uart1_irq" = "4" - - ## PCI INTA ... INTD and their GPIO pins - ## int==0: disable - register "pci_int[0]" = "0" - register "pci_int[1]" = "10" - register "pci_int[2]" = "0" - register "pci_int[3]" = "0" - register "pci_int_pin[0]" = "0" - register "pci_int_pin[1]" = "7" - register "pci_int_pin[2]" = "0" - register "pci_int_pin[3]" = "0" - - - # Keyboard Emulation Logic IRQs - # Enable keyboard IRQ2 - register "enable_kel_keyb_irq" = "0" - # Enable mouse IRQ12 - register "enable_kel_mouse_irq" = "0" - # Configure KEL Emulation IRQ, 0 to disable - register "kel_emul_irq" = "0" - - device pci f.0 on end # ISA Bridge - device pci f.1 on end # Flash controller - device pci f.2 off end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end end diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb index 4e73ccbfeb..8e2361b25a 100644 --- a/src/mainboard/digitallogic/msm800sev/Options.lb +++ b/src/mainboard/digitallogic/msm800sev/Options.lb @@ -21,7 +21,9 @@ uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_PRECOMPRESSED_PAYLOAD uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE @@ -43,18 +45,20 @@ uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses CONFIG_VIDEO_MB - -default CONFIG_VIDEO_MB=8 - +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE ## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 1024*1024 +default ROM_SIZE = 256*1024 ### ### Build options ### -#default CONFIG_CONSOLE_VGA=1 -#default CONFIG_PCI_ROM_RUN=0 +default CONFIG_CONSOLE_VGA=0 +default CONFIG_VIDEO_MB=8 +default CONFIG_PCI_ROM_RUN=0 + ## ## Build code for the fallback boot ## @@ -78,9 +82,8 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=0 +default HAVE_PIRQ_TABLE=1 default IRQ_SLOT_COUNT=6 - #object irq_tables.o ## @@ -96,6 +99,13 @@ default HAVE_OPTION_TABLE=0 default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xc8000 +default DCACHE_RAM_SIZE=0x08000 + ## ## Use a small 8K stack ## diff --git a/src/mainboard/digitallogic/msm800sev/irq_tables.c b/src/mainboard/digitallogic/msm800sev/irq_tables.c index 4322e20e9b..9236e529e5 100644 --- a/src/mainboard/digitallogic/msm800sev/irq_tables.c +++ b/src/mainboard/digitallogic/msm800sev/irq_tables.c @@ -1,3 +1,4 @@ +#if 0 /* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up @@ -58,3 +59,107 @@ unsigned long write_pirq_routing_table(unsigned long addr) { return copy_pirq_routing_table(addr); } +#endif +/* +* This file is part of the LinuxBIOS project. +* +* Copyright (C) 2007 Advanced Micro Devices +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include +#include +#include +#include "../../../southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 5 +#define PIRQC 10 +#define PIRQD 10 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*IRQ_SLOT_COUNT, /* there can be total 6 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x01<<3)|0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */ + {0x00,(0x0F<<3)|0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00,(0x0C<<3)|0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x1, 0x0}, /* slot1 */ + {0x00,(0x0D<<3)|0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x2, 0x0}, /* slot2 */ + {0x00,(0x0A<<3)|0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x3, 0x0}, /* slot3 */ + {0x00,(0x0B<<3)|0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0}, /* slot4 */ + } +}; + + + +unsigned long write_pirq_routing_table(unsigned long addr){ + int i, j, k, num_entries; + unsigned int pirq[4]; + uint16_t chipset_irq_map; + uint32_t pciAddr, pirtable_end; + struct irq_routing_table *pirq_tbl; + + pirtable_end = copy_pirq_routing_table(addr); + + /* Set up chipset IRQ steering */ + pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C; + chipset_irq_map = (PIRQD << 12 | PIRQC << 8 | PIRQB << 4 | PIRQA); + printk_debug("%s(%08X, %04X)\n", __FUNCTION__, pciAddr, chipset_irq_map); + outl(pciAddr & ~3, 0xCF8); + outl(chipset_irq_map, 0xCFC); + + pirq_tbl = (struct irq_routing_table *)(addr); + num_entries = (pirq_tbl->size - 32)/16; + + /* Set PCI IRQs */ + for (i=0; i < num_entries; i++){ + printk_debug("PIR Entry %d Dev/Fn: %X Slot: %d\n", i, pirq_tbl->slots[i].devfn, pirq_tbl->slots[i].slot); + for (j = 0; j < 4; j++){ + printk_debug("INT: %c bitmap: %x ", 'A'+j, pirq_tbl->slots[i].irq[j].bitmap); + for (k = 0; (!((pirq_tbl->slots[i].irq[j].bitmap >> k) & 1)) && (pirq_tbl->slots[i].irq[j].bitmap != 0); k++); /* finds lsb in bitmap to IRQ# */ + pirq[j] = k; + printk_debug("PIRQ: %d\n", k); + } + pci_assign_irqs(pirq_tbl->slots[i].bus, pirq_tbl->slots[i].devfn, pirq); /* bus, device, slots IRQs for {A,B,C,D} */ + } + + /* put the PIR table in memory and checksum */ + return pirtable_end; +} \ No newline at end of file diff --git a/src/mainboard/digitallogic/msm800sev/mainboard.c b/src/mainboard/digitallogic/msm800sev/mainboard.c index 8bc24a43a3..95442eafb5 100644 --- a/src/mainboard/digitallogic/msm800sev/mainboard.c +++ b/src/mainboard/digitallogic/msm800sev/mainboard.c @@ -6,54 +6,140 @@ #include #include #include +#include "../../../southbridge/amd/cs5536/cs5536.h" #include "chip.h" -#define DIVIL_LBAR_GPIO 0x5140000c -static void init_gpio() - { +/* Print the platform configuration */ +void print_conf(void) { +#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR + int i; + unsigned long iol; msr_t msr; - printk_debug("Initializing GPIO module...\n"); - // initialize the GPIO LBAR - msr.lo = GPIO_BASE; - msr.hi = 0x0000f001; - wrmsr(DIVIL_LBAR_GPIO, msr); - msr = rdmsr(DIVIL_LBAR_GPIO); - printk_debug("DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo); + int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, + CPU_DM_CONFIG0, CPU_RCONF_DEFAULT, + CPU_RCONF_BYPASS, CPU_RCONF_A0_BF, CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, + CPU_RCONF_SMM, CPU_RCONF_DMM, GLCP_DELAY_CONTROLS, GL_END + }; + + int gliu0_msr_defs[] = {MSR_GLIU0_BASE1, MSR_GLIU0_BASE2, MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6, + GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM, + GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2, MSR_GLIU0_SHADOW, + GLIU0_IOD_BM_0, GLIU0_IOD_BM_1, GLIU0_IOD_BM_2, + GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2, GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5, + GLIU0_GLD_MSR_COH, GL_END + }; + + int gliu1_msr_defs[] = {MSR_GLIU1_BASE1, MSR_GLIU1_BASE2, MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5, MSR_GLIU1_BASE6, + MSR_GLIU1_BASE7, MSR_GLIU1_BASE8, MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, + GLIU1_P2D_R_0, GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW, + GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, + GLIU1_IOD_SC_0, GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3, + GLIU1_GLD_MSR_COH, GL_END + }; + + int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3, CPU_RCONF4, + CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END + }; + + int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1, MDD_LEG_IO, MDD_PIN_OPT, + MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH, MDD_IRQM_PRIM, GL_END + }; + + int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF, GLPCI_C0_DF, GLPCI_E0_FF, + GLPCI_RC0, GLPCI_RC1, GLPCI_RC2, GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, + GL_END + }; + + int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2, MDD_DMA_SHAD3, MDD_DMA_SHAD4, + MDD_DMA_SHAD5, MDD_DMA_SHAD6, MDD_DMA_SHAD7, MDD_DMA_SHAD8, + MDD_DMA_SHAD9, GL_END + }; + + + printk_debug("---------- CPU ------------\n"); + + for(i = 0; cpu_msr_defs[i] != GL_END; i++) { + msr = rdmsr(cpu_msr_defs[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cpu_msr_defs[i], msr.hi, msr.lo); + } + + printk_debug("---------- GLIU 0 ------------\n"); + + for(i = 0; gliu0_msr_defs[i] != GL_END; i++) { + msr = rdmsr(gliu0_msr_defs[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu0_msr_defs[i], msr.hi, msr.lo); + } + + printk_debug("---------- GLIU 1 ------------\n"); + + for(i = 0; gliu1_msr_defs[i] != GL_END; i++) { + msr = rdmsr(gliu1_msr_defs[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu1_msr_defs[i], msr.hi, msr.lo); + } + + printk_debug("---------- RCONF ------------\n"); + + for(i = 0; rconf_msr[i] != GL_END; i++) { + msr = rdmsr(rconf_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], msr.hi, msr.lo); + } + + printk_debug("---------- VARIA ------------\n"); + msr = rdmsr(0x51300010); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, msr.lo); + + msr = rdmsr(0x51400015); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, msr.lo); + + printk_debug("---------- DIVIL IRQ ------------\n"); + msr = rdmsr(MDD_IRQM_YLOW); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, msr.lo); + msr = rdmsr(MDD_IRQM_YHIGH); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, msr.hi, msr.lo); + msr = rdmsr(MDD_IRQM_ZLOW); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, msr.lo); + msr = rdmsr(MDD_IRQM_ZHIGH); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, msr.hi, msr.lo); + + + printk_debug("---------- PCI ------------\n"); + + for(i = 0; pci_msr[i] != GL_END; i++) { + msr = rdmsr(pci_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], msr.hi, msr.lo); + } + + printk_debug("---------- LPC/UART DMA ------------\n"); + + for(i = 0; dma_msr[i] != GL_END; i++) { + msr = rdmsr(dma_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], msr.hi, msr.lo); + } + + printk_debug("---------- CS5536 ------------\n"); + + for(i = 0; cs5536_msr[i] != GL_END; i++) { + msr = rdmsr(cs5536_msr[i]); + printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], msr.hi, msr.lo); + } + + iol = inl(GPIOL_INPUT_ENABLE); + printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_ENABLE, iol); + iol = inl(GPIOL_EVENTS_ENABLE); + printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_EVENTS_ENABLE, iol); + iol = inl(GPIOL_INPUT_INVERT_ENABLE); + printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_INVERT_ENABLE, iol); + iol = inl(GPIO_MAPPER_X); + printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_MAPPER_X, iol); +#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR } +static void init(struct device *dev) { -static void init(struct device *dev) -{ - unsigned bus = 0; - unsigned devNic = PCI_DEVFN(0xd, 0); - unsigned devUsb = PCI_DEVFN(0xf, 4); - device_t usb = NULL, nic = NULL; - unsigned char irqUsb = 0xa, irqNic = 0xb; + printk_debug("MSM800SEV ENTER %s\n", __FUNCTION__); - printk_debug("DIGITALLOGIC MSM800SSEV ENTER %s\n", __FUNCTION__); - -#if 0 - // FIXME: do we need to initialize USB OHCI this way? - printk_debug("%s (%x,%x) set USB PCI interrupt line to %d\n", - __FUNCTION__, bus, devUsb, irqUsb); - - // initialize the USB controller - usb = dev_find_slot(bus, devUsb); - if (!usb) printk_err("Could not find USB\n"); - else pci_write_config8(usb, PCI_INTERRUPT_LINE, irqUsb); - - printk_debug("%s (%x,%x) set NIC PCI interrupt line to %d\n", - __FUNCTION__, bus, devNic, irqNic); - - // initialize theEEPRO 100 - nic = dev_find_slot(bus, devNic); - if (!nic) printk_err("Could not find USB\n"); - else pci_write_config8(nic, PCI_INTERRUPT_LINE, irqNic); -#endif - init_gpio(); - - printk_debug("DIGITALLOGIC MSM800SSEV EXIT %s\n", __FUNCTION__); + printk_debug("MSM800SEV EXIT %s\n", __FUNCTION__); } static void enable_dev(struct device *dev) diff --git a/targets/digitallogic/msm800sev/Config.lb b/targets/digitallogic/msm800sev/Config.lb index 91b6fac6b0..6835b81b8a 100644 --- a/targets/digitallogic/msm800sev/Config.lb +++ b/targets/digitallogic/msm800sev/Config.lb @@ -7,8 +7,9 @@ option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0 ## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use ## (normal AND fallback images and payloads). -## leave 64k for vsa and 32K for video ROM -option ROM_SIZE = 1024*1024 - 64*1024 - 32 * 1024 +## leave 36k for vsa +## +option ROM_SIZE = 1024*1024 - 36 * 1024 ## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image, ## not including any payload.