From fa742da56be11090fc713c21bc3faf786d99b135 Mon Sep 17 00:00:00 2001 From: Joseph Smith Date: Mon, 1 Feb 2010 22:51:18 +0000 Subject: [PATCH] Alot of it is trivial clean ups and 830 is now able to initialize one row/side of memory at a time. Signed-off-by: Joseph Smith Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5073 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/rca/rm4100/auto.c | 14 +- src/mainboard/thomson/ip1000/auto.c | 14 +- src/northbridge/intel/i82830/raminit.c | 321 +++++++++++++++---------- src/northbridge/intel/i82830/raminit.h | 11 +- 4 files changed, 206 insertions(+), 154 deletions(-) diff --git a/src/mainboard/rca/rm4100/auto.c b/src/mainboard/rca/rm4100/auto.c index af7dadde09..2f3892e3a0 100644 --- a/src/mainboard/rca/rm4100/auto.c +++ b/src/mainboard/rca/rm4100/auto.c @@ -69,7 +69,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #include "northbridge/intel/i82830/raminit.c" -#include "lib/generic_sdram.c" /** * Setup mainboard specific registers pre raminit. @@ -103,13 +102,6 @@ static void mb_early_setup(void) static void main(unsigned long bist) { - static const struct mem_controller memctrl[] = { - { - .d0 = PCI_DEV(0, 0, 0), - .channel0 = {0x50, 0x51}, - } - }; - if (bist == 0) early_mtrr_init(); if (memory_initialized()) { @@ -129,10 +121,8 @@ static void main(unsigned long bist) /* Setup mainboard specific registers */ mb_early_setup(); - /* SDRAM init */ - sdram_set_registers(memctrl); - sdram_set_spd_registers(memctrl); - sdram_enable(0, memctrl); + /* Initialize memory */ + sdram_initialize(); /* Check RAM. */ /* ram_check(0, 640 * 1024); */ diff --git a/src/mainboard/thomson/ip1000/auto.c b/src/mainboard/thomson/ip1000/auto.c index af7dadde09..2f3892e3a0 100644 --- a/src/mainboard/thomson/ip1000/auto.c +++ b/src/mainboard/thomson/ip1000/auto.c @@ -69,7 +69,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #include "northbridge/intel/i82830/raminit.c" -#include "lib/generic_sdram.c" /** * Setup mainboard specific registers pre raminit. @@ -103,13 +102,6 @@ static void mb_early_setup(void) static void main(unsigned long bist) { - static const struct mem_controller memctrl[] = { - { - .d0 = PCI_DEV(0, 0, 0), - .channel0 = {0x50, 0x51}, - } - }; - if (bist == 0) early_mtrr_init(); if (memory_initialized()) { @@ -129,10 +121,8 @@ static void main(unsigned long bist) /* Setup mainboard specific registers */ mb_early_setup(); - /* SDRAM init */ - sdram_set_registers(memctrl); - sdram_set_spd_registers(memctrl); - sdram_enable(0, memctrl); + /* Initialize memory */ + sdram_initialize(); /* Check RAM. */ /* ram_check(0, 640 * 1024); */ diff --git a/src/northbridge/intel/i82830/raminit.c b/src/northbridge/intel/i82830/raminit.c index 89f828d1dd..9cb194ec22 100644 --- a/src/northbridge/intel/i82830/raminit.c +++ b/src/northbridge/intel/i82830/raminit.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2008 Joseph Smith + * Copyright (C) 2008-2010 Joseph Smith * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -67,41 +67,122 @@ Macros and definitions. #define RAM_COMMAND_IC 0x1 /*----------------------------------------------------------------------------- -SDRAM configuration functions. +DIMM-initialization functions. -----------------------------------------------------------------------------*/ -/* Send the specified RAM command to all DIMMs. */ - -static void do_ram_command(const struct mem_controller *ctrl, uint32_t command, - uint32_t addr_offset) +static void do_ram_command(uint32_t command) { - int i; - uint8_t dimm_start, dimm_end; uint32_t reg32; /* Configure the RAM command. */ - reg32 = pci_read_config32(ctrl->d0, DRC); + reg32 = pci_read_config32(NORTHBRIDGE, DRC); /* Clear bits 29, 10-8, 6-4. */ reg32 &= 0xdffff88f; reg32 |= command << 4; - pci_write_config32(ctrl->d0, DRC, reg32); + pci_write_config32(NORTHBRIDGE, DRC, reg32); + PRINT_DEBUG("RAM command 0x"); + PRINT_DEBUG_HEX32(reg32); + PRINT_DEBUG("\r\n"); +} + +static void ram_read32(uint8_t dimm_start, uint32_t offset) +{ + if (offset == 0x55aa55aa) { + PRINT_DEBUG(" Reading RAM at 0x"); + PRINT_DEBUG_HEX32(dimm_start * 32 * 1024 * 1024); + PRINT_DEBUG(" => 0x"); + PRINT_DEBUG_HEX32(read32(dimm_start * 32 * 1024 * 1024)); + PRINT_DEBUG("\r\n"); + + PRINT_DEBUG(" Writing RAM at 0x"); + PRINT_DEBUG_HEX32(dimm_start * 32 * 1024 * 1024); + PRINT_DEBUG(" <= 0x"); + PRINT_DEBUG_HEX32(offset); + PRINT_DEBUG("\r\n"); + write32(dimm_start * 32 * 1024 * 1024, offset); + + PRINT_DEBUG(" Reading RAM at 0x"); + PRINT_DEBUG_HEX32(dimm_start * 32 * 1024 * 1024); + PRINT_DEBUG(" => 0x"); + PRINT_DEBUG_HEX32(read32(dimm_start * 32 * 1024 * 1024)); + PRINT_DEBUG("\r\n"); + } else { + PRINT_DEBUG(" Sending RAM command to 0x"); + PRINT_DEBUG_HEX32((dimm_start * 32 * 1024 * 1024) + offset); + PRINT_DEBUG("\r\n"); + read32((dimm_start * 32 * 1024 * 1024) + offset); + } +} + +static void initialize_dimm_rows(void) +{ + int i, row; + uint8_t dimm_start, dimm_end; + unsigned device; - /* Send the ram command to each row of memory. - * (DIMM_SOCKETS * 2) is the maximum number of rows possible. - * Note: Each DRB defines the upper boundary address of - * each SDRAM row in 32-MB granularity. - */ dimm_start = 0; - for (i = 0; i < (DIMM_SOCKETS * 2); i++) { - dimm_end = pci_read_config8(ctrl->d0, DRB + i); + for (row = 0; row < (DIMM_SOCKETS * 2); row++) { + + switch (row) { + case 0: + device = DIMM_SPD_BASE; + break; + case 1: + device = DIMM_SPD_BASE; + break; + case 2: + device = DIMM_SPD_BASE + 1; + break; + case 3: + device = DIMM_SPD_BASE + 1; + break; + } + + dimm_end = pci_read_config8(NORTHBRIDGE, DRB + row); + if (dimm_end > dimm_start) { - PRINT_DEBUG(" Sending RAM command 0x"); - PRINT_DEBUG_HEX32(reg32); - PRINT_DEBUG(" to 0x"); - PRINT_DEBUG_HEX32((dimm_start * 32 * 1024 * 1024) + addr_offset); - PRINT_DEBUG("\r\n"); - read32((dimm_start * 32 * 1024 * 1024) + addr_offset); + print_debug("Initializing SDRAM Row "); + print_debug_hex8(row); + print_debug("\r\n"); + + /* NOP command */ + PRINT_DEBUG(" NOP "); + do_ram_command(RAM_COMMAND_NOP); + ram_read32(dimm_start, 0); + udelay(200); + + /* Pre-charge all banks (at least 200 us after NOP) */ + PRINT_DEBUG(" Pre-charging all banks "); + do_ram_command(RAM_COMMAND_PRECHARGE); + ram_read32(dimm_start, 0); + udelay(1); + + /* 8 CBR refreshes (Auto Refresh) */ + PRINT_DEBUG(" 8 CBR refreshes "); + for (i = 0; i < 8; i++) { + do_ram_command(RAM_COMMAND_CBR); + ram_read32(dimm_start, 0); + udelay(1); + } + + /* MRS command */ + /* TODO: Set offset 0x1d0 according to DRT values */ + PRINT_DEBUG(" MRS "); + do_ram_command(RAM_COMMAND_MRS); + ram_read32(dimm_start, 0x1d0); + udelay(2); + + /* Set GMCH-M Mode Select bits back to NORMAL operation mode */ + PRINT_DEBUG(" Normal operation mode "); + do_ram_command(RAM_COMMAND_NORMAL); + ram_read32(dimm_start, 0); + udelay(1); + + /* Perform a dummy memory read/write cycle */ + PRINT_DEBUG(" Performing dummy read/write\r\n"); + ram_read32(dimm_start, 0x55aa55aa); + udelay(1); } /* Set the start of the next DIMM. */ dimm_start = dimm_end; @@ -122,8 +203,8 @@ static struct dimm_size spd_get_dimm_size(unsigned device) struct dimm_size sz; int i, module_density, dimm_banks; sz.side1 = 0; - module_density = spd_read_byte(device, 31); - dimm_banks = spd_read_byte(device, 5); + module_density = spd_read_byte(device, SPD_DENSITY_OF_EACH_ROW_ON_MODULE); + dimm_banks = spd_read_byte(device, SPD_NUM_DIMM_BANKS); /* Find the size of side1. */ /* Find the larger value. The larger value is always side1. */ @@ -163,19 +244,19 @@ static struct dimm_size spd_get_dimm_size(unsigned device) return sz; } -static void spd_set_dram_size(const struct mem_controller *ctrl) +static void set_dram_row_boundaries(void) { int i, value, drb1, drb2; for (i = 0; i < DIMM_SOCKETS; i++) { struct dimm_size sz; unsigned device; - device = ctrl->channel0[i]; + device = DIMM_SPD_BASE + i; drb1 = 0; drb2 = 0; /* First check if a DIMM is actually present. */ - if (spd_read_byte(device, 2) == 0x4) { + if (spd_read_byte(device, SPD_MEMORY_TYPE) == 0x4) { print_debug("Found DIMM in slot "); print_debug_hex8(i); print_debug("\r\n"); @@ -190,14 +271,15 @@ static void spd_set_dram_size(const struct mem_controller *ctrl) print_debug_hex16(sz.side2); print_debug(" on side 2\r\n"); + /* - Memory compatibility checks - */ /* Test for PC133 (i82830 only supports PC133) */ /* PC133 SPD9 - cycle time is always 75 */ - if (spd_read_byte(device, 9) != 0x75) { + if (spd_read_byte(device, SPD_MIN_CYCLE_TIME_AT_CAS_MAX) != 0x75) { print_err("SPD9 DIMM Is Not PC133 Compatable\r\n"); die("HALT\r\n"); } /* PC133 SPD10 - access time is always 54 */ - if (spd_read_byte(device, 10) != 0x54) { + if (spd_read_byte(device, SPD_ACCESS_TIME_FROM_CLOCK) != 0x54) { print_err("SPD10 DIMM Is Not PC133 Compatable\r\n"); die("HALT\r\n"); } @@ -225,6 +307,7 @@ static void spd_set_dram_size(const struct mem_controller *ctrl) ("are not supported on this northbridge\r\n"); die("HALT\r\n"); } + /* - End Memory compatibility checks - */ /* We need to divide size by 32 to set up the * DRB registers. @@ -244,8 +327,8 @@ static void spd_set_dram_size(const struct mem_controller *ctrl) } /* Set the value for DRAM Row Boundary Registers */ if (i == 0) { - pci_write_config8(ctrl->d0, DRB, drb1); - pci_write_config8(ctrl->d0, DRB + 1, drb1 + drb2); + pci_write_config8(NORTHBRIDGE, DRB, drb1); + pci_write_config8(NORTHBRIDGE, DRB + 1, drb1 + drb2); PRINT_DEBUG("DRB 0x"); PRINT_DEBUG_HEX8(DRB); PRINT_DEBUG(" has been set to 0x"); @@ -257,10 +340,9 @@ static void spd_set_dram_size(const struct mem_controller *ctrl) PRINT_DEBUG_HEX8(drb1 + drb2); PRINT_DEBUG("\r\n"); } else if (i == 1) { - value = pci_read_config8(ctrl->d0, DRB + 1); - pci_write_config8(ctrl->d0, DRB + 2, value + drb1); - pci_write_config8(ctrl->d0, DRB + 3, - value + drb1 + drb2); + value = pci_read_config8(NORTHBRIDGE, DRB + 1); + pci_write_config8(NORTHBRIDGE, DRB + 2, value + drb1); + pci_write_config8(NORTHBRIDGE, DRB + 3, value + drb1 + drb2); PRINT_DEBUG("DRB2 0x"); PRINT_DEBUG_HEX8(DRB + 2); PRINT_DEBUG(" has been set to 0x"); @@ -276,23 +358,23 @@ static void spd_set_dram_size(const struct mem_controller *ctrl) * These are supposed to be "Reserved" but memory will * not initialize properly if we don't. */ - value = pci_read_config8(ctrl->d0, DRB + 3); - pci_write_config8(ctrl->d0, DRB + 4, value); - pci_write_config8(ctrl->d0, DRB + 5, value); + value = pci_read_config8(NORTHBRIDGE, DRB + 3); + pci_write_config8(NORTHBRIDGE, DRB + 4, value); + pci_write_config8(NORTHBRIDGE, DRB + 5, value); } } } -static void set_dram_row_attributes(const struct mem_controller *ctrl) +static void set_dram_row_attributes(void) { int i, dra, col, width, value; for (i = 0; i < DIMM_SOCKETS; i++) { unsigned device; - device = ctrl->channel0[i]; + device = DIMM_SPD_BASE + i; /* First check if a DIMM is actually present. */ - if (spd_read_byte(device, 2) == 0x4) { + if (spd_read_byte(device, SPD_MEMORY_TYPE) == 0x4) { print_debug("Found DIMM in slot "); print_debug_hex8(i); print_debug(", setting DRA...\r\n"); @@ -300,10 +382,10 @@ static void set_dram_row_attributes(const struct mem_controller *ctrl) dra = 0x00; /* columns */ - col = spd_read_byte(device, 4); + col = spd_read_byte(device, SPD_NUM_COLUMNS); /* data width */ - width = spd_read_byte(device, 6); + width = spd_read_byte(device, SPD_MODULE_DATA_WIDTH_LSB); /* calculate page size in bits */ value = ((1 << col) * width); @@ -312,7 +394,7 @@ static void set_dram_row_attributes(const struct mem_controller *ctrl) dra = ((value / 8) >> 10); /* # of banks of DIMM (single or double sided) */ - value = spd_read_byte(device, 5); + value = spd_read_byte(device, SPD_NUM_DIMM_BANKS); if (value == 1) { if (dra == 2) { @@ -355,7 +437,7 @@ static void set_dram_row_attributes(const struct mem_controller *ctrl) } /* Set the value for DRAM Row Attribute Registers */ - pci_write_config8(ctrl->d0, DRA + i, dra); + pci_write_config8(NORTHBRIDGE, DRA + i, dra); PRINT_DEBUG("DRA 0x"); PRINT_DEBUG_HEX8(DRA + i); PRINT_DEBUG(" has been set to 0x"); @@ -364,14 +446,14 @@ static void set_dram_row_attributes(const struct mem_controller *ctrl) } } -static void set_dram_timing(const struct mem_controller *ctrl) +static void set_dram_timing(void) { /* Set the value for DRAM Timing Register */ /* TODO: Configure the value according to SPD values. */ - pci_write_config32(ctrl->d0, DRT, 0x00000010); + pci_write_config32(NORTHBRIDGE, DRT, 0x00000010); } -static void set_dram_buffer_strength(const struct mem_controller *ctrl) +static void set_dram_buffer_strength(void) { /* TODO: This needs to be set according to the DRAM tech * (x8, x16, or x32). Argh, Intel provides no docs on this! @@ -380,22 +462,61 @@ static void set_dram_buffer_strength(const struct mem_controller *ctrl) */ /* Set the value for System Memory Buffer Strength Control Registers */ - pci_write_config32(ctrl->d0, BUFF_SC, 0xFC9B491B); + pci_write_config32(NORTHBRIDGE, BUFF_SC, 0xFC9B491B); } /*----------------------------------------------------------------------------- Public interface. -----------------------------------------------------------------------------*/ -static void sdram_set_registers(const struct mem_controller *ctrl) +static void sdram_set_registers(void) +{ + PRINT_DEBUG("Setting initial sdram registers....\r\n"); + + /* Calculate the value for DRT DRAM Timing Register */ + set_dram_timing(); + + /* Setup System Memory Buffer Strength Control Registers */ + set_dram_buffer_strength(); + + /* Setup DRAM Row Boundary Registers */ + set_dram_row_boundaries(); + + /* Setup DRAM Row Attribute Registers */ + set_dram_row_attributes(); + + PRINT_DEBUG("Initial sdram registers have been set.\r\n"); +} + +static void northbridge_set_registers(void) { uint16_t value; int igd_memory = 0; - PRINT_DEBUG("Setting initial registers....\r\n"); + PRINT_DEBUG("Setting initial nothbridge registers....\r\n"); + + /* Set the value for Fixed DRAM Hole Control Register */ + pci_write_config8(NORTHBRIDGE, FDHC, 0x00); + + /* Set the value for Programable Attribute Map Registers + * Ideally, this should be R/W for as many ranges as possible. + */ + pci_write_config8(NORTHBRIDGE, PAM0, 0x30); + pci_write_config8(NORTHBRIDGE, PAM1, 0x33); + pci_write_config8(NORTHBRIDGE, PAM2, 0x33); + pci_write_config8(NORTHBRIDGE, PAM3, 0x33); + pci_write_config8(NORTHBRIDGE, PAM4, 0x33); + pci_write_config8(NORTHBRIDGE, PAM5, 0x33); + pci_write_config8(NORTHBRIDGE, PAM6, 0x33); + + /* Set the value for System Management RAM Control Register */ + pci_write_config8(NORTHBRIDGE, SMRAM, 0x02); /* Set the value for GMCH Control Register #0 */ - pci_write_config16(ctrl->d0, GCC0, 0xA072); + pci_write_config16(NORTHBRIDGE, GCC0, 0xA072); + + /* Set the value for Aperture Base Configuration Register */ + pci_write_config32(NORTHBRIDGE, APBASE, 0x00000008); /* Set the value for GMCH Control Register #1 */ switch (CONFIG_VIDEO_MB) { @@ -409,95 +530,45 @@ static void sdram_set_registers(const struct mem_controller *ctrl) igd_memory = 0x4; break; default: /* No memory */ - pci_write_config16(ctrl->d0, GCC1, 0x0002); + pci_write_config16(NORTHBRIDGE, GCC1, 0x0002); igd_memory = 0x0; } - value = pci_read_config16(ctrl->d0, GCC1); + value = pci_read_config16(NORTHBRIDGE, GCC1); value |= igd_memory << 4; - pci_write_config16(ctrl->d0, GCC1, value); + pci_write_config16(NORTHBRIDGE, GCC1, value); - /* Set the value for Aperture Base Configuration Register */ - pci_write_config32(ctrl->d0, APBASE, 0x00000008); - - /* Set the value for Register Range Base Address Register */ - pci_write_config32(ctrl->d0, RRBAR, 0x00000000); - - /* Set the value for Fixed DRAM Hole Control Register */ - pci_write_config8(ctrl->d0, FDHC, 0x00); - - /* Set the value for Programable Attribute Map Registers - * Ideally, this should be R/W for as many ranges as possible. - */ - pci_write_config8(ctrl->d0, PAM0, 0x30); - pci_write_config8(ctrl->d0, PAM1, 0x33); - pci_write_config8(ctrl->d0, PAM2, 0x33); - pci_write_config8(ctrl->d0, PAM3, 0x33); - pci_write_config8(ctrl->d0, PAM4, 0x33); - pci_write_config8(ctrl->d0, PAM5, 0x33); - pci_write_config8(ctrl->d0, PAM6, 0x33); - - /* Set the value for DRAM Throttling Control Register */ - pci_write_config32(ctrl->d0, DTC, 0x00000000); - - /* Set the value for System Management RAM Control Register */ - pci_write_config8(ctrl->d0, SMRAM, 0x02); - - /* Set the value for Extended System Management RAM Control Register */ - pci_write_config8(ctrl->d0, ESMRAMC, 0x38); - - PRINT_DEBUG("Initial registers have been set.\r\n"); + PRINT_DEBUG("Initial northbridge registers have been set.\r\n"); } -static void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ - spd_set_dram_size(ctrl); - set_dram_row_attributes(ctrl); - set_dram_timing(ctrl); - set_dram_buffer_strength(ctrl); -} - -static void sdram_enable(int controllers, const struct mem_controller *ctrl) +static void sdram_initialize(void) { int i; uint32_t reg32; + /* Setup Initial SDRAM Registers */ + sdram_set_registers(); + /* 0. Wait until power/voltages and clocks are stable (200us). */ udelay(200); - /* 1. Apply NOP. */ - PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n"); - do_ram_command(ctrl, RAM_COMMAND_NOP, 0); - udelay(200); + /* Initialize each row of memory one at a time */ + initialize_dimm_rows(); - /* 2. Precharge all. Wait tRP. */ - PRINT_DEBUG("RAM Enable 2: Precharge all\r\n"); - do_ram_command(ctrl, RAM_COMMAND_PRECHARGE, 0); - udelay(1); + /* Enable Refresh */ + PRINT_DEBUG("Enabling Refresh\r\n"); + reg32 = pci_read_config32(NORTHBRIDGE, DRC); + reg32 |= (RAM_COMMAND_REFRESH << 8); + pci_write_config32(NORTHBRIDGE, DRC, reg32); - /* 3. Perform 8 refresh cycles. Wait tRC each time. */ - PRINT_DEBUG("RAM Enable 3: CBR\r\n"); - for (i = 0; i < 8; i++) { - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); - udelay(1); - } + /* Set initialization complete */ + PRINT_DEBUG("Setting initialization complete\r\n"); + reg32 = pci_read_config32(NORTHBRIDGE, DRC); + reg32 |= (RAM_COMMAND_IC << 29); + pci_write_config32(NORTHBRIDGE, DRC, reg32); - /* 4. Mode register set. Wait two memory cycles. */ - /* TODO: Set offset according to DRT values */ - PRINT_DEBUG("RAM Enable 4: Mode register set\r\n"); - do_ram_command(ctrl, RAM_COMMAND_MRS, 0x1d0); - udelay(2); - - /* 5. Normal operation (enables refresh) */ - PRINT_DEBUG("RAM Enable 5: Normal operation\r\n"); - do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0); - udelay(1); - - /* 6. Enable refresh and Set initialization complete. */ - PRINT_DEBUG("RAM Enable 6: Enable Refresh and IC\r\n"); - reg32 = pci_read_config32(ctrl->d0, DRC); - reg32 |= ((RAM_COMMAND_REFRESH << 8) | (RAM_COMMAND_IC << 29)); - pci_write_config32(ctrl->d0, DRC, reg32); + /* Setup Initial Northbridge Registers */ + northbridge_set_registers(); PRINT_DEBUG("Northbridge following SDRAM init:\r\n"); DUMPNORTH(); diff --git a/src/northbridge/intel/i82830/raminit.h b/src/northbridge/intel/i82830/raminit.h index 707d38b611..3b4bf5fb2e 100644 --- a/src/northbridge/intel/i82830/raminit.h +++ b/src/northbridge/intel/i82830/raminit.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2008 Joseph Smith + * Copyright (C) 2008-2010 Joseph Smith * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,12 +21,13 @@ #ifndef NORTHBRIDGE_INTEL_I82830_RAMINIT_H #define NORTHBRIDGE_INTEL_I82830_RAMINIT_H +/* 82830 Northbridge PCI device */ +#define NORTHBRIDGE PCI_DEV(0, 0, 0) + /* The 82830 supports max. 2 dual-sided SO-DIMMs. */ #define DIMM_SOCKETS 2 -struct mem_controller { - device_t d0; - uint16_t channel0[DIMM_SOCKETS]; -}; +/* DIMM0 is at 0x50, DIMM1 is at 0x51. */ +#define DIMM_SPD_BASE 0x50 #endif /* NORTHBRIDGE_INTEL_I82830_RAMINIT_H */