AMD SB600 uses a hardcoded USB Debug Port number.

It cannot be changed via software according to the datasheet, whereas
this is indeed possible on AMD SB700. I tested using the SB700 mechanism
on SB600 but it didn't work, so I suspect the datasheet is indeed correct.

Thus, don't show the kconfig option for selecting the physical USB port
on the AMD SB600 southbridge.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5906 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2010-10-02 20:33:56 +00:00
parent df67c674a0
commit fa7efe9f40
1 changed files with 4 additions and 4 deletions

View File

@ -112,13 +112,13 @@ config USBDEBUG
If unsure, say N.
# Note: This option doesn't make sense on Intel ICH southbridges as those
# hardcode the physical USB port to be used as Debug Port to 1. It cannot
# be changed by coreboot.
# Note: This option doesn't make sense on Intel ICH / AMD SB600 southbridges
# as those hardcode the physical USB port to be used as Debug Port to 1.
# It cannot be changed by coreboot.
config USBDEBUG_DEFAULT_PORT
int "Default USB port to use as Debug Port"
default 1
depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX
depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX && !SOUTHBRIDGE_AMD_SB600
help
This option selects which physical USB port coreboot will try to
use as EHCI Debug Port first (valid values are: 1-15).