GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add support for the MSI K9ND Master Series (ms9282) board. 

Signed-off-by: Bingxun Shi <bingxunshi@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2552 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Bingxun Shi 2007-02-09 00:26:10 +00:00 committed by Uwe Hermann
parent 4020dd5ac5
commit fb1fddbab8
13 changed files with 2192 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

418
src/mainboard/msi/ms9282/Config.lb Normal file
View File

@ -0,0 +1,418 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2006 AMD
## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
##
## Copyright (C) 2006 MSI
## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
##
## Compute the location and size of where this firmware image
## (linuxBIOS plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
else
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
default ROM_SECTION_OFFSET = 0
end
##
## Compute the start location and size size of
## The linuxBIOS bootloader.
##
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
default CONFIG_ROM_PAYLOAD = 1
##
## Compute where this copy of linuxBIOS will start in the boot rom
##
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
##
## Compute a range of ROM that can cached to speed up linuxBIOS,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
#dir /drivers/ati/ragexl
#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
end
else
makerule ./auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
end
else
##
## Romcc output
##
makerule ./failover.E
depends "$(MAINBOARD)/failover.c ./romcc"
action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./failover.inc
depends "$(MAINBOARD)/failover.c ./romcc"
action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./auto.E
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
end
##
## Build our 16 bit and 32 bit linuxBIOS entry code
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
end
##
## Build our reset vector (This is where linuxBIOS is entered)
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
if USE_DCACHE_RAM
else
### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
end
##
## Include an id string (For safe flashing)
##
mainboardinit southbridge/nvidia/mcp55/id.inc
ldscript /southbridge/nvidia/mcp55/id.lds
##
## ROMSTRAP table for MCP55
##
if USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
end
###
### This is the early phase of linuxBIOS startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
else
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
else
# ROMCC
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit cpu/x86/sse/enable_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/sse/disable_sse.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc
end
##
## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
end
# sample config for msi/ms9282
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_F
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8 #mc0
device pci 18.0 on # northbridge
# devices on link 0, link 0 == LDT 0
chip southbridge/nvidia/mcp55
device pci 0.0 on end # HT
device pci 1.0 on # LPC
chip superio/winbond/w83627ehg
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off # SERIAL_FALSH
io 0x60 = 0x100
end
device pnp 2e.7 off # GAME_MIDI_GIPO1
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
end
device pnp 2e.8 off end # WDTO_PLED
device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 5
end
end
end
device pci 1.1 on # SM 0
chip drivers/i2c/i2cmux2 # pca9554 smbus mux
device i2c 70 on #0 pca9554 1
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
chip drivers/generic/generic #dimm 0-0-0
device i2c 54 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 55 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 56 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 57 on end
end
end
device i2c 70 on #0 pca9554 2
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
chip drivers/generic/generic #dimm 0-0-0
device i2c 54 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 55 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 56 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 57 on end
end
end
end
end
device pci 1.1 on # SM 1
chip drivers/i2c/i2cmux2 # pca9554 smbus mux
device i2c 72 on #pca9554 channle1
chip drivers/i2c/adm1027 #HWM ADT7476 1
device i2c 2e on end
end
end
device i2c 72 on #pca9545 channel 2
chip drivers/i2c/adm1027 #HWM ADT7463
device i2c 2e on end
end
end
device i2c 72 on end #pca9545 channel 3
device i2c 72 on #pca9545 channel 4
chip drivers/i2c/adm1027 #HWM ADT7476 2
device i2c 2e on end
end
end
end
end
device pci 2.0 on end # USB 1.1
device pci 2.1 on end # USB 2
device pci 4.0 on end # IDE
device pci 5.0 on end # SATA 0
device pci 5.1 on end # SATA 1
device pci 5.2 on end # SATA 2
device pci 6.0 on #P2P
chip drivers/pci/onboard
device pci 4.0 on end
register "rom_address" = "0xfff80000"
end
end # P2P
device pci 7.0 on end # reserve
device pci 8.0 on end # MAC0
device pci 9.0 on end # MAC1
device pci a.0 on
device pci 0.0 on
chip drivers/pci/onboard
device pci 4.0 on end #pci_E lan1
device pci 4.1 on end #pci_E lan2
end
end
end # 0x376
device pci b.0 on end # PCI E 0x374
device pci c.0 on end
device pci d.0 on #SAS
chip drivers/pci/onboard
device pci 0.0 on end
end
end # PCI E 1 0x378
device pci e.0 on end # PCI E 0 0x375
device pci f.0 on end #PCI E 0x377 pci_E slot
register "ide0_enable" = "1"
register "ide1_enable" = "1"
register "sata0_enable" = "1"
register "sata1_enable" = "1"
end
end # device pci 18.0
device pci 18.0 on end # Link 1
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #mc0
end # pci_domain
# chip drivers/generic/debug
# device pnp 0.0 off end
# device pnp 0.1 off end
# device pnp 0.2 off end
# device pnp 0.3 off end
# device pnp 0.4 off end
# device pnp 0.5 on end
# end
end # root_complex

309
src/mainboard/msi/ms9282/Options.lb Normal file
View File

@ -0,0 +1,309 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2006 AMD
## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
##
## Copyright (C) 2006 MSI
## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses IRQ_SLOT_COUNT
uses HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses FALLBACK_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_ROM_PAYLOAD_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses STACK_SIZE
uses HEAP_SIZE
uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses LINUXBIOS_EXTRA_VERSION
uses _RAMBASE
uses CONFIG_GDB_STUB
uses CROSS_COMPILE
uses CC
uses HOSTCC
uses OBJCOPY
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
#bx_b001- uses K8_HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
uses LIFT_BSP_APIC_ID
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
#bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
#bx_b005+
uses SB_HT_CHAIN_ON_BUS0
## ROM_SIZE is the size of boot ROM that this board will use.
#512K bytes
default ROM_SIZE=524288
#1M bytes
#bx- default ROM_SIZE=1048576
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
#default FALLBACK_SIZE=131072
#256K
default FALLBACK_SIZE=0x40000
###
### Build options
###
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default HAVE_MP_TABLE=1
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
##
## Move the default LinuxBIOS cmos range off of AMD RTC registers
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=4
default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
#CHIP_NAME ?
#default CONFIG_CHIP_NAME=1
#1G memory hole
#bx_b001- default K8_HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support
default K8_HT_FREQ_1G_SUPPORT=1
##HT Unit ID offset, default is 1, the typical one
default HT_CHAIN_UNITID_BASE=0x0
##real SB Unit ID, default is 0x20, mean dont touch it at last
#default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0)
#bx_b001- default K8_SB_HT_CHAIN_ON_BUS0=2
##bx_b005+ make the SB HT chain on bus 0
default SB_HT_CHAIN_ON_BUS0=1
##only offset for SB chain?, default is yes(1)
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#VGA
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
##
## enable CACHE_AS_RAM specifics
##
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcc000
default DCACHE_RAM_SIZE=0x4000
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1
default APIC_ID_OFFSET=0x10
default LIFT_BSP_APIC_ID=0
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default MAINBOARD_PART_NUMBER="ms9282"
default MAINBOARD_VENDOR="MSI"
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x9282
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
##
## LinuxBIOS C code runs at this location in RAM
##
default _RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
default CC="$(CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default TTYS0_BAUD=115200
#default TTYS0_BAUD=57600
#default TTYS0_BAUD=38400
#default TTYS0_BAUD=19200
#default TTYS0_BAUD=9600
#default TTYS0_BAUD=4800
#default TTYS0_BAUD=2400
#default TTYS0_BAUD=1200
# Select the serial console base port
default TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default TTYS0_LCS=0x3
##
### Select the linuxBIOS loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
end

296
src/mainboard/msi/ms9282/cache_as_ram_auto.c Normal file
View File

@ -0,0 +1,296 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define ASSEMBLY 1
#define __ROMCC__
#define RAMINIT_SYSINFO 1
#define CACHE_AS_RAM_ADDRESS_DEBUG 0
#define SET_NB_CFG_54 1
//used by raminit
#define QRANK_DIMM_SUPPORT 1
//used by init_cpus and fidvid
#define K8_SET_FIDVID 1
//if we want to wait for core1 done before DQS training, set it to 0
#define K8_SET_FIDVID_CORE0_ONLY 1
#define DEBUG_SMBUS 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include <cpu/amd/model_fxx_rev.h>
#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
#endif
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC)
#include <device/pci_ids.h>
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
static void memreset_setup(void)
{
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_SWITCH1 0x70
#define SMBUS_SWITCH2 0x72
unsigned device=(ctrl->channel0[0])>>8;
smbus_send_byte(SMBUS_SWITCH1, device);
smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
}
#if 0
static inline void change_i2c_mux(unsigned device)
{
#define SMBUS_SWITCH1 0x70
#define SMBUS_SWITHC2 0x72
smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
}
#endif
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
//#define K8_4RANK_DIMM_SUPPORT 1
#include "northbridge/amd/amdk8/amdk8_f.h"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "sdram/generic_sdram.c"
/* msi does not want the default */
#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#define MCP55_NUM 1
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
//set GPIO to input mode
#define MCP55_MB_SETUP \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
#include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
#if USE_FALLBACK_IMAGE == 1
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
static void sio_setup(void)
{
unsigned value;
uint32_t dword;
uint8_t byte;
byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
byte |= 0x20;
pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
dword |= (1<<0);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b"(cpu_init_detectedx) /* inputs */
);
fallback_image:
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
}
//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1.
#define RC0 (2<<8)
#define RC1 (1<<8)
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
RC0|(0xa<<3)|0, RC0|(0xa<<3)|2, RC0|(0xa<<3)|4, RC0|(0xa<<3)|6,
RC0|(0xa<<3)|1, RC0|(0xa<<3)|3, RC0|(0xa<<3)|5, RC0|(0xa<<3)|7,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
RC1|(0xa<<3)|0, RC1|(0xa<<3)|2, RC1|(0xa<<3)|4, RC1|(0xa<<3)|6,
RC1|(0xa<<3)|1, RC1|(0xa<<3)|3, RC1|(0xa<<3)|5, RC1|(0xa<<3)|7,
#endif
};
unsigned bsp_apicid = 0;
int needs_reset;
struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
char *p ;
if (bist == 0) {
//init_cpus(cpu_init_detectedx);
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
w83627ehg_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
setup_ms9282_resource_map();
setup_coherent_ht_domain();
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched
start_other_cores();
//wait_all_other_cores_started(bsp_apicid);
#endif
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
if (needs_reset) {
print_info("ht reset -\r\n");
soft_reset();
}
//It's the time to set ctrl now;
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
enable_smbus();
#if 0
int i;
for(i=4;i<8;i++) {
change_i2c_mux(i);
dump_smbus_registers();
}
#endif
memreset_setup();
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram();
}

27
src/mainboard/msi/ms9282/chip.h Normal file
View File

@ -0,0 +1,27 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
extern struct chip_operations mainboard_msi_ms9282_ops;
struct mainboard_msi_ms9282_config {
int fixup_scsi;
int fixup_vga;
};

98
src/mainboard/msi/ms9282/cmos.layout Normal file
View File

@ -0,0 +1,98 @@
entries
#start-bit length config config-ID name
#0 8 r 0 seconds
#8 8 r 0 alarm_seconds
#16 8 r 0 minutes
#24 8 r 0 alarm_minutes
#32 8 r 0 hours
#40 8 r 0 alarm_hours
#48 8 r 0 day_of_week
#56 8 r 0 day_of_month
#64 8 r 0 month
#72 8 r 0 year
#80 4 r 0 rate_select
#84 3 r 0 REF_Clock
#87 1 r 0 UIP
#88 1 r 0 auto_switch_DST
#89 1 r 0 24_hour_mode
#90 1 r 0 binary_values_enable
#91 1 r 0 square-wave_out_enable
#92 1 r 0 update_finished_enable
#93 1 r 0 alarm_interrupt_enable
#94 1 r 0 periodic_interrupt_enable
#95 1 r 0 disable_clock_updates
#96 288 r 0 temporary_filler
0 384 r 0 reserved_memory
384 1 e 4 boot_option
385 1 e 4 last_boot
386 1 e 1 ECC_memory
388 4 r 0 reboot_bits
392 3 e 5 baud_rate
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
399 1 e 2 dual_core
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
420 4 e 7 boot_second
424 4 e 7 boot_third
428 4 h 0 boot_index
432 8 h 0 boot_countdown
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
728 256 h 0 user_data
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
1000 24 r 0 reserved_memory
enumerations
#ID value text
1 0 Disable
1 1 Enable
2 0 Enable
2 1 Disable
4 0 Fallback
4 1 Normal
5 0 115200
5 1 57600
5 2 38400
5 3 19200
5 4 9600
5 5 4800
5 6 2400
5 7 1200
6 6 Notice
6 7 Info
6 8 Debug
6 9 Spew
7 0 Network
7 1 HDD
7 2 Floppy
7 8 Fallback_Network
7 9 Fallback_HDD
7 10 Fallback_Floppy
#7 3 ROM
8 0 DDR400
8 1 DDR333
8 2 DDR266
8 3 DDR200
9 0 off
9 1 87.5%
9 2 75.0%
9 3 62.5%
9 4 50.0%
9 5 37.5%
9 6 25.0%
9 7 12.5%
checksums
checksum 392 983 984

114
src/mainboard/msi/ms9282/failover.c Normal file
View File

@ -0,0 +1,114 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <arch/io.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "pc80/mc146818rtc_early.c"
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "northbridge/amd/amdk8/reset_test.c"
static void sio_setup(void)
{
unsigned value;
uint32_t dword;
uint8_t byte;
byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
byte |= 0x20;
pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
dword |= (1<<0);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
}
#if CONFIG_LOGICAL_CPUS==1
#include "cpu/amd/dualcore/dualcore_id.c"
#endif
static unsigned long main(unsigned long bist)
{
/* Make cerain my local apic is useable */
enable_lapic();
/* Is this a cpu only reset? */
if (early_mtrr_init_detected()) {
if (last_boot_normal()) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Is this a secondary cpu? */
if (!boot_cpu()) {
if (last_boot_normal()) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal()) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
asm volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist) /* inputs */
: /* clobbers */
);
fallback_image:
return bist;
}

168
src/mainboard/msi/ms9282/get_bus_conf.c Normal file
View File

@ -0,0 +1,168 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
#if CONFIG_LOGICAL_CPUS==1
#include <cpu/amd/dualcore.h>
#endif
#include <cpu/amd/amdk8_sysconf.h>
#include "mb_sysconf.h"
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
struct mb_sysconf_t mb_sysconf;
unsigned pci1234x[] =
{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000ff0,
0x0000ff0,
0x0000ff0,
// 0x0000ff0,
// 0x0000ff0,
// 0x0000ff0,
// 0x0000ff0,
// 0x0000ff0
};
unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
0x20202020,
// 0x20202020,
// 0x20202020,
// 0x20202020,
// 0x20202020,
// 0x20202020,
};
extern void get_sblk_pci1234(void);
static unsigned get_bus_conf_done = 0;
static unsigned get_hcid(unsigned i)
{
unsigned id = 0;
unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
unsigned devn = sysconf.hcdn[i] & 0xff;
device_t dev;
dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
switch (dev->device) {
case 0x0369: //IO55
id = 4;
break;
}
// we may need more way to find out hcid: subsystem id? GPIO read ?
// we need use id for 1. bus num, 2. mptable, 3. acpi table
return id;
}
void get_bus_conf(void)
{
unsigned apicid_base;
struct mb_sysconf_t *m;
device_t dev;
int i, j;
if(get_bus_conf_done==1) return; //do it only once
get_bus_conf_done = 1;
sysconf.mb = &mb_sysconf;
m = sysconf.mb;
memset(m, 0, sizeof(struct mb_sysconf_t));
sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
for(i=0;i<sysconf.hc_possible_num; i++) {
sysconf.pci1234[i] = pci1234x[i];
sysconf.hcdn[i] = hcdnx[i];
}
get_sblk_pci1234();
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
m->bus_type[0] = 1; //pci
m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff;
/* MCP55 */
dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
if (dev) {
m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
}
else {
printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
}
for(i=2; i<8;i++) {
dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
if (dev) {
m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
}
else {
printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
}
}
for(i=0; i< sysconf.hc_possible_num; i++) {
if(!(sysconf.pci1234[i] & 0x1) ) continue;
unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
unsigned busn_max = (sysconf.pci1234[i] >> 24) & 0xff;
for (j = busn; j <= busn_max; j++)
m->bus_type[j] = 1;
if(m->bus_isa <= busn_max)
m->bus_isa = busn_max + 1;
printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
}
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(1);
#else
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
m->apicid_mcp55 = apicid_base+0;
}

130
src/mainboard/msi/ms9282/irq_tables.c Normal file
View File

@ -0,0 +1,130 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#include <arch/pirq_routing.h>
#include <cpu/amd/amdk8_sysconf.h>
#include "mb_sysconf.h"
static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
pirq_info->bus = bus;
pirq_info->devfn = devfn;
pirq_info->irq[0].link = link0;
pirq_info->irq[0].bitmap = bitmap0;
pirq_info->irq[1].link = link1;
pirq_info->irq[1].bitmap = bitmap1;
pirq_info->irq[2].link = link2;
pirq_info->irq[2].bitmap = bitmap2;
pirq_info->irq[3].link = link3;
pirq_info->irq[3].bitmap = bitmap3;
pirq_info->slot = slot;
pirq_info->rfu = rfu;
}
unsigned long write_pirq_routing_table(unsigned long addr)
{
struct irq_routing_table *pirq;
struct irq_info *pirq_info;
unsigned slot_num;
uint8_t *v;
struct mb_sysconf_t *m;
unsigned sbdn;
uint8_t sum=0;
int i;
get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
m = sysconf.mb;
/* Align the table to be 16 byte aligned. */
addr += 15;
addr &= ~15;
/* This table must be betweeen 0xf0000 & 0x100000 */
printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
pirq->rtr_bus = m->bus_mcp55[0];
pirq->rtr_devfn = ((sbdn+6)<<3)|0;
pirq->exclusive_irqs = 0;
pirq->rtr_vendor = 0x10de;
pirq->rtr_device = 0x0370;
pirq->miniport_data = 0;
memset(pirq->rfu, 0, sizeof(pirq->rfu));
pirq_info = (void *) ( &pirq->checksum + 1);
slot_num = 0;
//pci bridge
write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
for(i=1; i< sysconf.hc_possible_num; i++) {
if(!(sysconf.pci1234[i] & 0x1) ) continue;
unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
unsigned devn = sysconf.hcdn[i] & 0xff;
write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
}
pirq->size = 32 + 16 * slot_num;
for (i = 0; i < pirq->size; i++)
sum += v[i];
sum = pirq->checksum - sum;
if (sum != pirq->checksum) {
pirq->checksum = sum;
}
printk_info("done.\n");
return (unsigned long) pirq_info;
}

33
src/mainboard/msi/ms9282/mainboard.c Normal file
View File

@ -0,0 +1,33 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "chip.h"
#if CONFIG_CHIP_NAME == 1
struct chip_operations mainboard_tyan_ms9282_ops = {
CHIP_NAME("MSI ms9282 mainboard")
};
#endif

38
src/mainboard/msi/ms9282/mb_sysconf.h Normal file
View File

@ -0,0 +1,38 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef MB_SYSCONF_H
#define MB_SYSCONF_H
struct mb_sysconf_t {
unsigned char bus_isa;
unsigned char bus_mcp55[8]; //1
unsigned apicid_mcp55;
unsigned bus_type[256];
};
#endif

171
src/mainboard/msi/ms9282/mptable.c Normal file
View File

@ -0,0 +1,171 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <arch/smp/mpspec.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#include <cpu/amd/amdk8_sysconf.h>
#include "mb_sysconf.h"
void *smp_write_config_table(void *v)
{
static const char sig[4] = "PCMP";
static const char oem[8] = "MSI ";
static const char productid[12] = "MS9282 ";
struct mp_config_table *mc;
struct mb_sysconf_t *m;
unsigned sbdn;
int i,j;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
memset(mc, 0, sizeof(*mc));
memcpy(mc->mpc_signature, sig, sizeof(sig));
mc->mpc_length = sizeof(*mc); /* initially just the header */
mc->mpc_spec = 0x04;
mc->mpc_checksum = 0; /* not yet computed */
memcpy(mc->mpc_oem, oem, sizeof(oem));
memcpy(mc->mpc_productid, productid, sizeof(productid));
mc->mpc_oemptr = 0;
mc->mpc_oemsize = 0;
mc->mpc_entry_count = 0; /* No entries yet... */
mc->mpc_lapic = LAPIC_ADDR;
mc->mpe_length = 0;
mc->mpe_checksum = 0;
mc->reserved = 0;
smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
m = sysconf.mb;
/*Bus: Bus ID Type*/
/* define bus and isa numbers */
for(j= 0; j < 256 ; j++) {
if(m->bus_type[j])
smp_write_bus(mc, j, "PCI ");
}
smp_write_bus(mc, m->bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
{
device_t dev;
struct resource *res;
uint32_t dword;
dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
}
dword = 0x43c6c643;
pci_write_config32(dev, 0x7c, dword);
dword = 0x81001a00;
pci_write_config32(dev, 0x80, dword);
dword = 0xd00002d2;
pci_write_config32(dev, 0x84, dword);
}
}
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_mcp55, 0x3);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_mcp55, 0x4);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_mcp55, 0x6);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_mcp55, 0x7);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_mcp55, 0x8);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_mcp55, 0xc);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_mcp55, 0xd);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
//SMBUS
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
//USB1.1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
//USB2.0
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
//SATA1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
//SATA2
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
//SATA3
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
//NIC1
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
//NIC2
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
for(j=7; j>=2; j--) {
if(!m->bus_mcp55[j]) continue;
for(i=0;i<4;i++) {
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
}
}
for(j=0; j<1; j++)
for(i=0;i<4;i++) {
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
}
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1);
/* There is no extension information... */
/* Compute the checksums */
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
printk_debug("Wrote the mp table end at: %p - %p\n",
mc, smp_next_mpe_entry(mc));
return smp_next_mpe_entry(mc);
}
unsigned long write_smp_table(unsigned long addr)
{
void *v;
v = smp_write_floating_table(addr);
return (unsigned long)smp_write_config_table(v);
}

299
src/mainboard/msi/ms9282/resourcemap.c Normal file
View File

@ -0,0 +1,299 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de>
*
* Copyright (C) 2006 AMD
* Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
*
* Copyright (C) 2006 MSI
* Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* MSI ms9282 needs a different resource map
*
*/
static void setup_ms9282_resource_map(void)
{
static const unsigned int register_values[] = {
#if 1
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
* F1:0x4C i = 1
* F1:0x54 i = 2
* F1:0x5C i = 3
* F1:0x64 i = 4
* F1:0x6C i = 5
* F1:0x74 i = 6
* F1:0x7C i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 3] Reserved
* [10: 8] Interleave select
* specifies the values of A[14:12] to use with interleave enable.
* [15:11] Reserved
* [31:16] DRAM Limit Address i Bits 39-24
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
/* DRAM Base i Registers
* F1:0x40 i = 0
* F1:0x48 i = 1
* F1:0x50 i = 2
* F1:0x58 i = 3
* F1:0x60 i = 4
* F1:0x68 i = 5
* F1:0x70 i = 6
* F1:0x78 i = 7
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 7: 2] Reserved
* [10: 8] Interleave Enable
* 000 = No interleave
* 001 = Interleave on A[12] (2 nodes)
* 010 = reserved
* 011 = Interleave on A[12] and A[14] (4 nodes)
* 100 = reserved
* 101 = reserved
* 110 = reserved
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
* [15:11] Reserved
* [13:16] DRAM Base Address i Bits 39-24
* This field defines the upper address bits of a 40-bit address
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
#endif
#if 1
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
* F1:0x8C i = 1
* F1:0x94 i = 2
* F1:0x9C i = 3
* F1:0xA4 i = 4
* F1:0xAC i = 5
* F1:0xB4 i = 6
* F1:0xBC i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = Reserved
* [ 6: 6] Reserved
* [ 7: 7] Non-Posted
* 0 = CPU writes may be posted
* 1 = CPU writes must be non-posted
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
* This field defines the upp adddress bits of a 40-bit address that
* defines the end of a memory-mapped I/O region n
*/
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
* F1:0x88 i = 1
* F1:0x90 i = 2
* F1:0x98 i = 3
* F1:0xA0 i = 4
* F1:0xA8 i = 5
* F1:0xB0 i = 6
* F1:0xB8 i = 7
* [ 0: 0] Read Enable
* 0 = Reads disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes disabled
* 1 = Writes Enabled
* [ 2: 2] Cpu Disable
* 0 = Cpu can use this I/O range
* 1 = Cpu requests do not use this I/O range
* [ 3: 3] Lock
* 0 = base/limit registers i are read/write
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
* This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
#endif
#if 1
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
* F1:0xCC i = 1
* F1:0xD4 i = 2
* F1:0xDC i = 3
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = reserved
* [11: 6] Reserved
* [24:12] PCI I/O Limit Address i
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
* F1:0xC8 i = 1
* F1:0xD0 i = 2
* F1:0xD8 i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
* 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
#endif
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
* F1:0xE4 i = 1
* F1:0xE8 i = 2
* F1:0xEC i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 2: 2] Device Number Compare Enable
* 0 = The ranges are based on bus number
* 1 = The ranges are ranges of devices on bus 0
* [ 3: 3] Reserved
* [ 6: 4] Destination Node
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 7] Reserved
* [ 9: 8] Destination Link
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 - Reserved
* [15:10] Reserved
* [23:16] Bus Number Base i
* This field defines the lowest bus number in configuration region i
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration region i
*/
#if 1
// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003,
// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
#endif
};
int max;
max = sizeof(register_values)/sizeof(register_values[0]);
setup_resource_map(register_values, max);
}

91
targets/msi/ms9282/Config.lb Normal file
View File

@ -0,0 +1,91 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2006 MSI
## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
target ms9282
mainboard msi/ms9282
romimage "normal"
# 48K for SCSI FW
# option ROM_SIZE = 475136
option ROM_SIZE = 512*1024-36*1024
# option ROM_SIZE = 524288
# 48K for SCSI FW and 48K for ATI ROM
# option ROM_SIZE = 425984
# 64K for Etherboot
# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
# option ROM_IMAGE_SIZE=0x13800
# option ROM_IMAGE_SIZE=0x18800
option ROM_IMAGE_SIZE=0x20000
# option ROM_IMAGE_SIZE=0x15800
option XIP_ROM_SIZE=0x40000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo.zelf
# payload ../../../payloads/tg3--filo_hda2.zelf
# payload ../../../payloads/tg3.zelf
# payload ../../../../payloads/tg3_vga.zelf
# payload /filo.elf
payload /tg3--filo.elf
# payload /payload
# payload ../../../../payloads/e1000_vga.zelf
# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
# payload ../../../payloads/tg3_com2.zelf
# payload ../../../payloads/e1000--filo.zelf
# payload ../../../payloads/tg3--e1000--filo.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
# option ROM_IMAGE_SIZE=0x13800
# option ROM_IMAGE_SIZE=0x19800
option ROM_IMAGE_SIZE=0x20000
# option ROM_IMAGE_SIZE=0x15800
option XIP_ROM_SIZE=0x40000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo.zelf
# payload ../../../payloads/tg3--filo_hda2.zelf
# payload ../../../payloads/tg3.zelf
# payload ../../../../payloads/tg3_vga.zelf
# payload ../../../../payloads/memtest
# payload ../../../../payloads/e1000_vga.zelf
# payload ../../../../payloads/filo_hda.zelf
# payload /filo.elf
payload /tg3--filo.elf
# payload /payload
# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
# payload ../../../payloads/tg3_com2.zelf
# payload ../../../payloads/e1000--filo.zelf
# payload ../../../payloads/tg3--e1000--filo.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
end
buildrom ./ms9282.lxb ROM_SIZE "normal" "fallback"