mb/google/dedede/var/drawcia: Add low_power_probe config for camera devices
Add low_power_probe config to camera devices so that driver skips initial probe during kernel boot and hence prevents privacy LED blink. BUG=b:178060668 TEST=Build and boot to OS on Drawcia. Ensure no blink on privacy LED. Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I00dfe2ce0b57ff3eaa258204f49e79a280754dcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/52190 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
176c8877ce
commit
fc096888e1
|
@ -257,6 +257,8 @@ chip soc/intel/jasperlake
|
|||
register "remote_name" = ""IPU0""
|
||||
|
||||
register "has_power_resource" = "1"
|
||||
register "low_power_probe" = "1"
|
||||
|
||||
#Controls
|
||||
register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
|
||||
register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
|
||||
|
@ -289,9 +291,17 @@ chip soc/intel/jasperlake
|
|||
register "chip_name" = ""DW AF DAC""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
|
||||
|
||||
register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC""
|
||||
register "has_power_resource" = "1"
|
||||
register "vcm_compat" = ""dongwoon,dw9714""
|
||||
register "low_power_probe" = "1"
|
||||
|
||||
register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8
|
||||
#_ON
|
||||
register "on_seq.ops_cnt" = "1"
|
||||
register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
|
||||
#_OFF
|
||||
register "off_seq.ops_cnt" = "1"
|
||||
register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
|
||||
device i2c 0C on end
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
|
@ -305,7 +315,17 @@ chip soc/intel/jasperlake
|
|||
register "nvm_readonly" = "1"
|
||||
register "nvm_width" = "0x08"
|
||||
register "nvm_compat" = ""atmel,24c08""
|
||||
register "low_power_probe" = "1"
|
||||
|
||||
register "has_power_resource" = "1"
|
||||
|
||||
register "gpio_panel.gpio[0].gpio_num" = "GPP_D14" #power_enable_1p2
|
||||
#_ON
|
||||
register "on_seq.ops_cnt" = "1"
|
||||
register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
|
||||
#_OFF
|
||||
register "off_seq.ops_cnt" = "1"
|
||||
register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
|
||||
device i2c 50 on end
|
||||
end
|
||||
end # I2C 3
|
||||
|
|
Loading…
Reference in New Issue