From fc38e8834132f83ed59e6b0f59bd90c940edd991 Mon Sep 17 00:00:00 2001 From: Wenbin Mei Date: Tue, 19 May 2020 09:49:54 +0800 Subject: [PATCH] mb/google/asurada: Configure pinctrl for SD and MMC The pins for SD and MMC must be configured properly so we can access them in payloads. Signed-off-by: Wenbin Mei Change-Id: Ie6bdffb987d5acf286645550f1c53f294f71c38a Reviewed-on: https://review.coreboot.org/c/coreboot/+/46685 Tested-by: build bot (Jenkins) Reviewed-by: Yu-Ping Wu --- src/mainboard/google/asurada/mainboard.c | 61 ++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/src/mainboard/google/asurada/mainboard.c b/src/mainboard/google/asurada/mainboard.c index 9146d7bc1d..7a37df5764 100644 --- a/src/mainboard/google/asurada/mainboard.c +++ b/src/mainboard/google/asurada/mainboard.c @@ -2,10 +2,71 @@ #include #include +#include +#include #include +#define MSDC0_DRV_MASK 0x3fffffff +#define MSDC1_DRV_MASK 0x3ffff000 +#define MSDC0_DRV_VALUE 0x24924924 +#define MSDC1_DRV_VALUE 0x24924000 + +static void configure_emmc(void) +{ + void *gpio_base = (void *)IOCFG_TL_BASE; + int i; + + const gpio_t emmc_pu_pin[] = { + GPIO(MSDC0_DAT0), GPIO(MSDC0_DAT1), + GPIO(MSDC0_DAT2), GPIO(MSDC0_DAT3), + GPIO(MSDC0_DAT4), GPIO(MSDC0_DAT5), + GPIO(MSDC0_DAT6), GPIO(MSDC0_DAT7), + GPIO(MSDC0_CMD), GPIO(MSDC0_RSTB), + }; + + const gpio_t emmc_pd_pin[] = { + GPIO(MSDC0_DSL), GPIO(MSDC0_CLK), + }; + + for (i = 0; i < ARRAY_SIZE(emmc_pu_pin); i++) + gpio_set_pull(emmc_pu_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_UP); + + for (i = 0; i < ARRAY_SIZE(emmc_pd_pin); i++) + gpio_set_pull(emmc_pd_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_DOWN); + + /* set eMMC cmd/dat/clk/ds/rstb pins driving to 10mA */ + clrsetbits32(gpio_base, MSDC0_DRV_MASK, MSDC0_DRV_VALUE); +} + +static void configure_sdcard(void) +{ + void *gpio_base = (void *)IOCFG_RM_BASE; + int i; + + const gpio_t sdcard_pu_pin[] = { + GPIO(MSDC1_DAT0), GPIO(MSDC1_DAT1), + GPIO(MSDC1_DAT2), GPIO(MSDC1_DAT3), + GPIO(MSDC1_CMD), + }; + + const gpio_t sdcard_pd_pin[] = { + GPIO(MSDC1_CLK), + }; + + for (i = 0; i < ARRAY_SIZE(sdcard_pu_pin); i++) + gpio_set_pull(sdcard_pu_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_UP); + + for (i = 0; i < ARRAY_SIZE(sdcard_pd_pin); i++) + gpio_set_pull(sdcard_pd_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_DOWN); + + /* set sdcard cmd/dat/clk pins driving to 10mA */ + clrsetbits32(gpio_base, MSDC1_DRV_MASK, MSDC1_DRV_VALUE); +} + static void mainboard_init(struct device *dev) { + configure_emmc(); + configure_sdcard(); setup_usb_host(); }