mb/google/skyrim/var/winterhold: Update devicetree setting

Initialize winterhold devicetree.

BUG=b:241196632
TEST=emerge-skyrim coreboot

Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9fe224cdc2acb1f13d3bf9341b487892c15f8ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This commit is contained in:
EricKY Cheng 2022-09-02 14:40:32 +08:00 committed by Martin Roth
parent 0d42db666b
commit fc71ea82f9
1 changed files with 174 additions and 1 deletions

View File

@ -1,5 +1,178 @@
# SPDX-License-Identifier: GPL-2.0-or-later
chip soc/amd/mendocino
device domain 0 on end
device domain 0 on
device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A
device ref xhci_1 on # XHCI1 controller
chip drivers/usb/acpi
device ref xhci_1_root_hub on # XHCI1 root hub
chip drivers/usb/acpi
device ref usb3_port3 on # USB 3.1 port3
chip drivers/usb/hub
register "desc" = ""USB Hub""
register "name" = ""VL822""
register "port_count" = "4"
device usb 0.0 on # VL822 USB3 hub
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A0 (DB)""
register "type" = "UPC_TYPE_USB3_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
device usb 3.0 on end
end
chip drivers/usb/acpi
register "desc" = ""WWAN""
register "type" = "UPC_TYPE_INTERNAL"
register "group" = "ACPI_PLD_GROUP(2, 2)"
register "has_power_resource" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_42)"
register "reset_off_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_8)"
register "enable_delay_ms" = "20"
device usb 3.1 on end
end
end # VL822 USB3 hub
end
end # USB 3.1 port3
end
chip drivers/usb/acpi
device ref usb2_port3 on # USB 2 port3
chip drivers/usb/hub
register "desc" = ""USB Hub""
register "name" = ""VL822""
register "port_count" = "4"
device usb 0.0 on # VL822 USB2 hub
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A0 (DB)""
register "type" = "UPC_TYPE_USB3_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
device usb 2.0 on end
end
chip drivers/usb/acpi
register "desc" = ""WWAN""
register "type" = "UPC_TYPE_INTERNAL"
register "group" = "ACPI_PLD_GROUP(2, 2)"
device usb 2.1 on end
end
end # VL822 USB2 hub
end
end # USB 2 port3
end
end # XHCI1 root hub
end
end # XHCI1 controller
end # Internal GPP Bridge 0 to Bus A
end # domain
device ref i2c_0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_40)"
register "wake" = "GEVENT_20"
register "probed" = "1"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GXTP7863""
register "generic.desc" = ""Goodix Touchpad""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_40)"
register "generic.wake" = "GEVENT_20"
register "generic.probed" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end # I2C0
device ref i2c_1 on
chip drivers/i2c/hid
register "generic.hid" = ""GDIX0000""
register "generic.desc" = ""Goodix Touchscreen""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_29)"
register "generic.probed" = "1"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)"
register "generic.enable_delay_ms" = "10"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)"
register "generic.reset_off_delay_ms" = "1"
register "generic.reset_delay_ms" = "10"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)"
register "generic.stop_delay_ms" = "180"
register "generic.stop_off_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 5d on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_29)"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)"
register "enable_delay_ms" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)"
register "reset_delay_ms" = "20"
register "reset_off_delay_ms" = "2"
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)"
register "stop_off_delay_ms" = "2"
register "has_power_resource" = "1"
register "disable_gpio_export_in_crs" = "1"
device i2c 10 on end
end
chip drivers/generic/gpio_keys
register "name" = ""PENH""
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_3)"
register "key.dev_name" = ""EJCT""
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
register "key.linux_code" = "SW_PEN_INSERTED"
register "key.linux_input_type" = "EV_SW"
register "key.label" = ""pen_eject""
register "key.debounce_interval" = "100"
register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
device generic 0 on end
end
end # I2C1
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""RTL5682""
register "name" = ""RT58""
register "desc" = ""Realtek RT5682""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
register "property_count" = "1"
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""10EC1019""
register "desc" = ""Realtek SPK AMP R""
register "uid" = "1"
device i2c 29 on end
end
chip drivers/i2c/generic
register "hid" = ""10EC1019""
register "desc" = ""Realtek SPK AMP L""
register "uid" = "2"
register "probed" = "1"
device i2c 2a on end
end
end # I2C2
device ref uart_1 on
chip drivers/uart/acpi
register "name" = ""CRFP""
register "desc" = ""Fingerprint Reader""
register "hid" = "ACPI_DT_NAMESPACE_HID"
register "compat_string" = ""google,cros-ec-uart""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)"
register "wake" = "GEVENT_15"
register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)"
register "has_power_resource" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)"
register "enable_delay_ms" = "3"
device generic 0 alias fpmcu on end
end
end # UART1
end # chip soc/amd/mendocino