diff --git a/Documentation/mainboard/purism/librem_14.md b/Documentation/mainboard/purism/librem_14.md
index ac9d0cdded..6ece264594 100644
--- a/Documentation/mainboard/purism/librem_14.md
+++ b/Documentation/mainboard/purism/librem_14.md
@@ -85,10 +85,6 @@ located underneath the Wi-Fi module, below the left cooling fan.
 
  * Automatic detection of external audio input/output via the 3.5mm jack
    does not currently work.
- * Touchpad interrupt non-functional when correctly configured as active-low
-   and level-triggered, so configured as active-high instead. This causes an
-   interrupt storm and prevents the CPU from idling due to moderate (10-20%)
-   usage on a single core.
  * PL1/PL2 limited to 15W/20W by charger and battery discharge capability,
    not SoC or thermal design.
 
diff --git a/src/mainboard/purism/librem_cnl/variants/librem_14/devicetree.cb b/src/mainboard/purism/librem_cnl/variants/librem_14/devicetree.cb
index 375aa5dfcc..f61eb2b60a 100644
--- a/src/mainboard/purism/librem_cnl/variants/librem_14/devicetree.cb
+++ b/src/mainboard/purism/librem_cnl/variants/librem_14/devicetree.cb
@@ -185,7 +185,7 @@ chip soc/intel/cannonlake
 				register "generic.hid" = ""HTIX5288""
 				register "generic.name" = ""TPD0""
 				register "generic.uid" = "1"
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B20_IRQ)"
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
 				register "hid_desc_reg_offset" = "0x20"
 				device i2c 2c on end
 			end
diff --git a/src/mainboard/purism/librem_cnl/variants/librem_14/gpio.c b/src/mainboard/purism/librem_cnl/variants/librem_14/gpio.c
index 49c6b8a767..df8332e158 100644
--- a/src/mainboard/purism/librem_cnl/variants/librem_14/gpio.c
+++ b/src/mainboard/purism/librem_cnl/variants/librem_14/gpio.c
@@ -90,8 +90,8 @@ static const struct pad_config gpio_table[] = {
 	/* GPP_B2 - VRALERT# */
 	PAD_CFG_NF(GPP_B2, NONE, PLTRST, NF1),
 
-	/* GPP_B3 - NC */
-	PAD_NC(GPP_B3, NONE),
+	/* GPP_B3 - TP_INT# */
+	PAD_CFG_GPI_APIC_LOW(GPP_B3, NONE, PLTRST),
 
 	/* GPP_B4 - NC */
 	PAD_NC(GPP_B4, UP_20K),
@@ -141,13 +141,8 @@ static const struct pad_config gpio_table[] = {
 	/* GPP_B19 - USB3_P1_PWREN */
 	PAD_CFG_GPO(GPP_B19, 1, PLTRST),
 
-	/* GPP_B20 - TP_INT#
-	 *
-	 * Due to interrupts failing to trigger when correctly configured
-	 * active-low as PAD_CFG_GPI_APIC_LOW(GPP_B20, NONE, PLTRST),
-	 * must configure instead as active-high:
-	 */
-	PAD_CFG_GPI_TRIG_OWN(GPP_B20, NONE, PLTRST, LEVEL, ACPI),
+	/* GPP_B20 - NC */
+	PAD_NC(GPP_B20, NONE),
 
 	/* GPP_B21 - NC */
 	PAD_NC(GPP_B21, UP_20K),